Compal NL8 Series ユーザーマニュアル

USER MANUAL

May 2014

ENGLISH

2

CONTENTS

BEFORE YOU START ........................................................................................... 5

Make sure you have everything ...................................................................................5

Familiarize yourself with the computer .......................................................................6

OPENING THE DISPLAY PANEL ..............................................................................6

FRONT OVERVIEW...................................................................................................7

LEFT SIDE OVERVIEW .............................................................................................9

RIGHT SIDE OVERVIEW ........................................................................................10

BACK OVERVIEW ...................................................................................................12

BOTTOM OVERVIEW..............................................................................................13

GETTING STARTED ............................................................................................ 14

Power Sources .............................................................................................................14

CONNECTING THE POWER ADAPTER ................................................................14

RECHARGING THE BATTERY ...............................................................................15

Starting Your Notebook ...............................................................................................16

POWER ON .............................................................................................................16

STATUS INDICATORS ............................................................................................. 17

USING FUNCTION KEYS ........................................................................................18

USING THE TOUCHPAD .........................................................................................19

USING USER DEFINED KEYS ...............................................................................20

REALTEK REALSPEED CONNECTION SPEED-UP UTILITY ................................23

HARD DRIVE ARRAY (RAID) CONFIGURATION ...................................................25

TROUBLESHOOTING ......................................................................................... 28

Identifying the Problem ...............................................................................................28

SPECIFICATIONS ................................................................................................ 30

3

TAKING CARE OF YOUR NOTEBOOK PC

To prevent possible overheating of the computer’s

processor, make sure you don’t block the

openings provided for ventilation.

DO NOT press or touch the display panel.

DO NOT place on uneven or unstable work

surfaces.

DO NOT use your notebook computer under

harsh conditions.

DO NOT place or drop objects on the computer

and DO NOT apply heavy pressure on it.

DO NOT subject the computer to magnetic fields.

DO NOT expose to direct sunlight. DO NOT use or store in extreme temperatures.

4

Avoid sudden changes in temperature or humidity

by keeping it away from A/C and heating vents.

DO NOT expose the computer to rain or

moisture.

DO NOT place near fire or other sources of heat. DO NOT tamper with the batteries. Keep them

away from children.

DO NOT expose to dust and/or corrosive

chemicals.

DO NOT slam your notebook shut and never pick

up or hold your notebook by the display.

DO NOT spray water or any other cleaning fluids

directly on the display.

If you are traveling with your computer, remember

to carry it as hand luggage. Do not check it in as

baggage.

5

BEFORE YOU START

Make sure you have everything

When you receive your notebook PC, unpack it carefully, and check the packing list to make sure

your notebook system is complete.

Once you have checked and confirmed that your notebook system is complete, read through the

following pages to learn about all of your notebook components.

Depending on the model you purchased, the actual appearance of your notebook

may vary from that shown in this manual.

NOTE

BEFORE YOU START

6

Familiarize yourself with the computer

OPENING THE DISPLAY PANEL

To open the display panel, simply lift the lid up.

When closing it, be sure not to slam it shut.

BEFORE YOU START

7

FRONT OVERVIEW

The following is an overview of the front of the notebook.

Display Panel

Suspend/Power On

Button

User Defined Keys

Backlight Button

Keyboard

Stereo Speakers

Touchpad Pointing

Device

Camera

Camera LED

Microphone

Camera

The built-in HD camera allows you to snap a photo or create a video chat or video conference

with just a click.

Camera LED

The camera LED indicates when the camera is enabled or disabled.

Microphone

The built-in microphone allows for the reception and transmission of voice and/or other audio data

to any program capable of accepting such input.

BEFORE YOU START

8

Display Panel

The display panel is a color LCD panel with back lighting for the display of text and graphics.

Suspend/Power On Button

This button turns your notebook on and off or puts it to sleep. (See Suspend/Power On Button in

the Power On section for more information.)

Touchpad Pointing Device

The touchpad pointing device is a mouse-like cursor control with two buttons and a touch sensitive

movement pad.

Stereo Speakers

The built-in dual speakers allow for stereo sound and provide audio output for video and music

playback.

Keyboard

A full-size keyboard with numeric keys and dedicated Windows

®

keys.

User Defined Keys

The user defined keys are keyboard shortcuts for quick control of your notebook. You can program

your own sets of user defined keys. (See Using User Defined Keys section for more information.)

Backlight Button

The backlight button turns the LCD cover backlight and the touchpad backlight on and off.

BEFORE YOU START

9

LEFT SIDE OVERVIEW

The following is a brief description of the left side of the notebook.

Memory Card ReaderUSB 3.0 Port

Status Indicator LightsUSB 2.0 Port

USB 3.0 Port

The USB 3.0 port allows you to connect Universal Serial Bus devices. It supports v3.0 of the USB

standard, which allows data exchange rates as high as 4.8 Gb/s. USB 3.0 is backwards compatible

with USB 2.0.

USB 2.0 Port

The USB 2.0 port allows you to connect Universal Serial Bus devices. It supports v2.0 of the USB

standard, which allows data exchange rates as high as 480 Mb/s. It also supports sleep-and-charge

functionality.

Memory Card Reader

The memory card reader offers a fast and easy way to transfer digital photos, music and data between

your notebook and flash compatible devices such as digital cameras, portable MP3 players, mobile

phones, tablets, and handheld devices.

Status Indicator Lights

The status indicator lights correspond to specific operating modes. These modes are: battery status,

hard disk drive (HDD) activity, and wireless LAN activity.

BEFORE YOU START

10

RIGHT SIDE OVERVIEW

The following is a brief description of the right side of the notebook.

USB 3.0 PortsMicrophone/SPDIF Jack

Kensington Lock Slot

Audio Combo Jack

(Headphone & Microphone)

Microphone/SPDIF Jack

The microphone/SPDIF jack allows you to connect an external mono microphone and SPDIF

compatible audio equipment.

Audio Combo Jack (Headphone & Microphone)

The audio combo jack allows you to connect headphones, external speakers, amplifiers or an

external mono microphone.

USB 3.0 Ports

The USB 3.0 ports allow you to connect Universal Serial Bus devices. They support v3.0 of

the USB standard, which allows data exchange rates as high as 4.8 Gb/s. USB 3.0 is backwards

compatible with USB 2.0.

BEFORE YOU START

11

Kensington Lock Slot

The Kensington lock slot allows you to secure your notebook to an immovable object with an

optional security cable.

BEFORE YOU START

12

BACK OVERVIEW

The following is an overview of the back of the notebook.

External Monitor Port

Power Adapter Port

HDMI PortLAN (RJ-45) Port

Power Adapter Port

The power adapter port allows you to plug in the AC adapter to power your notebook and charge

the internal Lithium-Ion battery.

LAN (RJ-45) Port

The LAN port is designed to support a 10/100/1000 Base-T standard RJ-45 plug.

External Monitor Port

The external monitor port allows you to connect an external monitor.

HDMI Port

The HDMI port allows you to connect a video device such as a television, a projector, or a VCR

to your computer.

BEFORE YOU START

13

BOTTOM OVERVIEW

The following is an overview of the bottom of the notebook.

Subwoofer

Rating Label

Fan Outlets

These are open ports for the fan to dissipate heat from the computer’s internal components. Do not

block or place the computer in such a position that you inadvertently allow the outlet to become

blocked.

Subwoofer

The 3W subwoofer provides enhanced low-frequency tones (bass) to audio output from your

notebook.

Rating Label

The label shows the model number and other information about your notebook.

14

GETTING STARTED

Power Sources

Your computer has two types of power source: a Lithium-Ion battery or an AC adapter.

CONNECTING THE POWER ADAPTER

The AC adapter provides power for operating your notebook PC and charging the battery.

Connecting the AC Adapter

1. Plug the DC output cable into the DC power jack of your notebook PC.

2. Plug the AC adapter into an AC electrical outlet.

Switching from AC Adapter Power to Battery Power

Remove the AC adapter. Your notebook will automatically switch to battery power.

The Lithium-Ion battery is not charged upon purchase. Initially, you will need to

connect the AC adapter to use your notebook PC.

NOTE

GETTING STARTED

15

RECHARGING THE BATTERY

The Lithium-Ion battery is recharged internally using the AC adapter. To recharge the battery, make

sure the computer is connected to the AC.

There is no “memory effect” in Lithium-Ion batteries; therefore you do not need to discharge the

battery completely before recharging. The charge times will be significantly longer if your notebook

PC is in use while the battery is charging. If you want to charge the battery more quickly, put your

computer into Suspend mode, or turn it off while the adapter is charging the battery.

Low Battery State

When the battery charge is low, a notification message appears. If you do not respond to the low

battery message, the battery continues to discharge until it is too low to operate. When this happens,

your notebook PC goes into Suspend mode. There is no guarantee your data will be saved once

the notebook reaches this point.

To protect your computer from damage, use only the power adapter that came

with it because each power adapter has its own power output rating.

Once your computer goes into Suspend mode as a result of a dead battery you will be unable to

resume operation until you provide a source of power either from an adapter, or a charged battery.

Once you have provided power, you can press the Suspend/Power On button to resume operation.

In Suspend mode, your data is maintained for some time, but if a power source is not provided

promptly, the power indicator stops flashing and the goes out, in which case you have lost the

data that was not saved. Once you provide power, you can continue to use your computer while

an adapter charges the battery.

CAUTION

GETTING STARTED

16

Starting Your Notebook

POWER ON

Suspend/Power On Button

The suspend/power on switch is used to turn on your notebook from its off state. Once you have

connected your AC adapter or charged the internal Lithium-Ion battery, you can power on your

notebook by pressing the suspend/power on button located above the keyboard. If you need to take

an extended break press the button again to turn it off.

Do not carry your notebook around with the power on or subject it to shocks or

vibration, as you risk damaging the hard disk.

When you power on your notebook, it will perform a Power On Self Test (POST) to check the

internal parts and configuration for correct functionality. If a fault is found, your computer emits

an audio warning and or displays and error message.

Depending on the nature of the problem, you may be able to continue by starting the operating

system or by entering the BIOS setup utility and revising the settings.

After satisfactory completion of the Power On Self Test (POST), your notebook loads the installed

operating system.

Never turn off your notebook during the Power On Self Test (POST), or an

unrecoverable error may occur.

CAUTION

GETTING STARTED

17

STATUS INDICATORS

The status indicator lights correspond to specific operating modes. These modes are: battery status,

hard disk drive (HDD) activity, and wireless LAN activity.

Wireless LAN Activity Indicator

Battery Status Indicator

Hard Disk Drive (HDD) Activity Indicator

Battery Status Indicator

The battery status indicator tells you the battery charge level.

• The light illuminates when the computer is operating from the battery, whether it is charging

or not.

• The light indicates:

▪ Solid White Light - Battery is above 90% capacity.

▪ Solid Amber Light - Battery is between 10% and 90% capacity.

▪ Blinking Amber Light - Battery is below 10% capacity.

▪ Fast Blinking Amber Light - Battery is at a critically low level and the system cannot be

powered on, plug the AC adapter into your notebook to charge the battery immediately.

• If the battery is not working correctly, the indicator will be off.

• Batteries subjected to shocks, vibrations or extreme temperatures can be permanently damaged.

Hard Disk Drive (HDD) Activity Indicator

The hard disk drive (HDD) activity indicator tells you whether your internal hard drive is

being accessed and, if so, how fast.

Wireless LAN Activity Indicator

The wireless LAN activity indicator tells you whether your computer is connected to a wireless

network or not.

GETTING STARTED

18

USING FUNCTION KEYS

Your computer has 12 function keys, F1 through F12. The functions assigned to these keys differ

for each application. You should refer to your software documentation to find out how these keys

are used.

The [FN] key provides extended functions for the notebook and is always used in conjunction

with another key.

• [FN+Esc]: Enables or disables the touchpad function.

• [FN+F1]: Places the notebook in Suspend mode. Pressing the Power button returns it to active

mode.

• [FN+F2]: Enables or disables the wireless network connection.

• [FN+F3]: Allows you to change your selection of where to send your display video. Each

time you press the combination of keys you will step to the next choice. The choices, in order,

are: built-in display panel only, both built-in display panel and external monitor, or external

monitor only.

• [FN+F4]: Decreases the screen brightness.

• [FN+F5]: Increases the screen brightness.

• [FN+F6]: Mutes the computer’s volume.

• [FN+F7]: Decreases the computer’s volume.

• [FN+F8]: Increases the computer’s volume.

• [FN+F9]: Plays or pauses the current multimedia track.

• [FN+F10]: Stops the current multimedia track.

• [FN+F11]: Goes to the previous multimedia track.

• [FN+F12]: Goes to the next multimedia track.

• [FN]+Spacebar: Toggles the keyboard backlight between On (dim), On (bright), and Off.

GETTING STARTED

19

USING THE TOUCHPAD

A touchpad pointing device comes built into your computer. It is used to control the movement of

the pointer to select items on your display panel.

The touchpad consists of a cursor control, a left and right button, and a scroll bar. The cursor control

works the same way a mouse does, and moves the cursor around the display. It only requires light

pressure from the tip of your finger. The left and right buttons function the same as mouse buttons.

The actual functionality of the buttons may vary depending on the application that is being used.

Finally, the scroll bar allows you to navigate quickly through pages, without having to use the

on-screen cursor to manipulate the up and down scroll bars.

Clicking

Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish

to select, press the left button once, and then immediately release it. To right-click, move the mouse

cursor to the item you wish to select, press the right button once, and then immediately release it.

You also have the option to perform the clicking operation by tapping lightly on the touchpad once.

Double-Clicking

Double-clicking means pushing and releasing the left button twice in rapid succession. This

procedure does not function with the right button. To double-click, move the cursor to the item

you wish to select, press the left button twice, and then immediately release it. You also have the

option to perform the double-click operation by tapping lightly on the touchpad twice.

Dragging

Dragging means pressing and holding the left button, while moving the cursor. To drag, move

the cursor to the item you wish to move. Press and hold the left button while moving the item

to its new location and then release it. Dragging can also be done using only the touchpad. First,

tap the touchpad twice over the item you wish to move making sure to leave your finger on the

pad after the final tap. Next, move the object to its new location by moving your finger across

the touchpad, and then release your finger. Using the scroll bar allows you to navigate through a

document quickly without using the window’s scroll bars. This is particularly useful when you are

navigating through on-line pages.

GETTING STARTED

20

USING USER DEFINED KEYS

Your computer has a row of user defined keys located above the keyboard, which help you access

common actions quickly. You can program these 4 user defined keys via the User Defined Key

application.

Programming User Defined Keys

Before defining the 4 keys, you need to install the User Defined Key application on your computer:

1. Once running the User Defined Key file, a user definition key window is displayed.

ページを読み込んでいます...

Compal NL8 Series ユーザーマニュアル

Compal NL8 Series ユーザーマニュアル

他の言語で

その他の書類