Thrustmaster 2960858 ユーザーマニュアル

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ČESTINA

TÜRKÇE

POLSKI

SVENSKA

SUOMI

SLOVENCINA

MAGYAR NYELV

תירבע

ﺔﻴﺑﺮﻌﻟا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

简体中文

繁體中文

ENGLISH

1/18

User manual

TECHNICAL FEATURES

1 2

10

11

9

8

4

5

612

3

7

2/18

12

6

987

1. X and Y axes for throttle

2. Thrust reverser mechanism on each

axis

3. 4 detents per axis — 4 virtual

buttons per axis

4. 8 action buttons

5. Selector switch for engines: 1/2 or

3/4

6. SATA connectors for external TCA

Quadrant Add-On Airbus Edition

modules (add-on sold separately)

7. Connector for TFRP rudder system

(sold separately)

8. Friction adjustment screw

9. USB connector (type B)

10. Crossbar location

11. Mechanism for enabling/disabling

thrust reverser on each axis

12. Mechanism for enabling/disabling

detents on each axis

3/18

INSTALLATION ON PC

1. Please visit https://support.thrustmaster.com/. Click Joysticks / TCA Quadrant

Airbus Edition, and select Drivers. Download and install the PC driver and its

customized interface for the Windows Control Panel.

2. Once the PC driver has been installed, connect the device’s USB connector to one of the

USB ports on your PC.

3. To access the Control Panel, click Start / Apps / Thrustmaster / Control Panel (in

Windows® 10 / 8.1 / 8).

The Game Controllers dialog box appears.

The accessory is listed onscreen with the name TCA Q-Eng 1&2 (or TCA Q-Eng 3&4,

depending on the position of the selector switch for the engines [5]), along with OK status.

4. In the Game Controllers dialog box, click Properties to test and view all features.

Enable virtual buttons: This feature allows to enable or disable the virtual buttons on the

throttle’s axes. Click Apply once you’ve selected your mode.

You are now ready to play!

4/18

MAPPING FOR THE 16 BUTTONS AND 2 AXES

1

3

5

7&8

6

4

3

2

5/18

6/18

MAKING CHANGES TO THE AXES ON THE TCA QUADRANT

AIRBUS EDITION THROTTLE QUADRANT

The TCA Quadrant Airbus Edition throttle quadrant features mechanical selectors allowing

you to disable the detents/notches on each axis. Doing so allows you to have smooth axes,

while maintaining virtual buttons 9 through 16.

This option lets you change the piloting sensations according to the type of aircraft being

used in your simulation (commercial aircraft or civil aircraft).

1. Turn the TCA Quadrant Airbus Edition upside down, and unscrew the two screws for

each of the selectors using a screwdriver with the corresponding head shape.

2. Switch the position of the selectors, using the indicators as a guide: this will let you

choose either a smooth axis, or an axis with detents/notches, for each axis on the TCA

Quadrant Airbus Edition throttle quadrant.

7/18

DISABLING THE THRUST REVERSERS ON THE TCA

QUADRANT AIRBUS EDITION THROTTLE QUADRANT

The TCA Quadrant Airbus Edition throttle quadrant features functional thrust reversers,

replicating those found on Airbus commercial aviation throttles. You can disable the thrust

reverser mechanism, for piloting better suited to civil aviation.

Commercial airliner mode:

1. At the stop, lift up the thrust reverser mechanism.

2. Moving past the stop lets you use the thrust reverser.

General and civil aviation mode:

1. Lift up the thrust reverser mechanism.

2. Turn the selector to position 0 to disable the thrust reverser mechanism.

3. The thrust lever can now move through the entire axis.

2

1

2

1

3

8/18

CONNECTING TWO TCA QUADRANT AIRBUS EDITION

THROTTLE QUADRANTS

You can connect a second TCA Quadrant Airbus Edition throttle quadrant (sold separately):

this will allow you to use 4 axes in total, simulating a four-engine commercial airliner, for

example.

1. Turn both TCA Quadrant Airbus Edition throttle quadrants upside down, and screw on the

two attachment pieces included with the TCA Quadrant Airbus Edition to attach the two

devices together.

2. On the second throttle quadrant, physically set the selector switch to 3/4 in order to

associate engines 3 and 4 with the second throttle quadrant (in the Control Panel on PC).

3. Connect the axes together by pair (1/2 and 3/4) to make them easier to move in unison,

using the crossbar included with each TCA Quadrant Airbus Edition.

1

3

2

ENG 1/2 3/4

9/18

4. When both devices are connected to your PC via USB, they appear independently in the

Game Controllers dialog box:

10/18

CONNECTING THE TCA QUADRANT AIRBUS EDITION

THROTTLE QUADRANT TO THE TCA QUADRANT ADD-ON

AIRBUS EDITION*

* Sold separately

The TCA Quadrant Airbus Edition throttle quadrant lets you connect the additional TCA

Quadrant Add-On Airbus Edition modules (sold separately) on both sides of the TCA

Quadrant Airbus Edition.

This modularity adds new axes and action buttons and lets you expand the takeoff, in-flight

and landing kinematics for the TCA Quadrant Airbus Edition throttle quadrant.

1. Turn the TCA Quadrant Airbus Edition throttle quadrant and the two additional TCA

Quadrant Add-On Airbus Edition modules upside down, and (using a screwdriver with the

corresponding head shape) screw on the four attachment pieces included with the TCA

Quadrant Airbus Edition throttle quadrant and the TCA Quadrant Add-On Airbus Edition,

attaching all three devices together: the Speed brake module to the left of the TCA

Quadrant Airbus Edition, and the Flaps module to the right.

2. Connect the SATA cables included with the TCA Quadrant Add-On Airbus Edition to the

SATA connectors on the TCA Quadrant Airbus Edition.

3.

- To avoid damaging the products, use a screwdriver with the corresponding head shape to

tighten/untighten the screws.

- Only use the official cables provided by Thrustmaster.

*

+

1 1

1

2

1 1

2

11/18

ATTACHING/SEPARATING THE TWO THRUST LEVERS

Use the crossbar included with the TCA Quadrant Airbus Edition throttle quadrant to connect

the two thrust levers together.

12/18

ADJUSTING THE FRICTION

IMPORTANT NOTES:

- The friction for the two thrust levers is set to 50% by default.

- In order to allow for precise adjustment according to your preferences, you can use a

screwdriver with the corresponding head shape — or the included crossbar — to turn the

friction adjustment screw.

1. Push both thrust levers forward to their maximum values, and then access the friction

adjustment screw at the back of the TCA Quadrant Airbus Edition.

2. To increase the friction, turn the friction adjustment screw clockwise.

13/18

3. To decrease the friction, turn the friction adjustment screw counterclockwise.

- To avoid damaging the friction system, be careful not to over-tighten the adjustment

screw: stop turning the screw when you feel resistance.

- Never completely unscrew the adjustment screw, to avoid the screw falling inside the

body of the TCA Quadrant Airbus Edition.

ATTACHING THE TCA QUADRANT AIRBUS EDITION

THROTTLE QUADRANT TO A COCKPIT OR OTHER

STATIONARY SURFACE

You can use the two perforations located on the underside of the TCA Quadrant Airbus

Edition to attach it to a cockpit or other stationary surface, using M6 screws (not included).

14/18

CONNECTING THE TFRP* RUDDER SYSTEM TO THE TCA

QUADRANT AIRBUS EDITION THROTTLE QUADRANT

* Sold separately

The TCA Quadrant Airbus Edition throttle quadrant has 7 axes, with 3 of these axes being

reserved for the TFRP rudder system.

The TFRP rudder system connects directly to the TCA Quadrant Airbus Edition throttle

quadrant.

1. Connect the male RJ12 connector for the TFRP rudder system to the female RJ12

connector located at the back of the TCA Quadrant Airbus Edition throttle quadrant.

2. Connect the USB connector for the TCA Quadrant Airbus Edition throttle quadrant to one

of the USB ports on your PC.

Important notes regarding automatic calibration of axes:

- Always leave the rudder axis centered when connecting the TFRP rudder system to the

TCA Quadrant Airbus Edition throttle quadrant: never put your feet on the TFRP rudder

system’s pedals when doing so.

- The pedals’ 3 axes automatically calibrate themselves after a few movements, and after

having reached the physical stops for the rudder axis and the 2 differential brake axes.

T.A.R.G.E.T ADVANCED PROGRAMMING SOFTWARE

(Thrustmaster Advanced pRogramming Graphical EdiTor)

Please visit https://support.thrustmaster.com. Click Joysticks / TCA Quadrant Airbus

Edition, then select Software. Download and install the T.A.R.G.E.T advanced

programming software.

Main features of T.A.R.G.E.T:

- Different possible configurations for the axes.

- Different possible programming levels: Basic, Advanced and Script.

- Use of the Drag and Drop principle.

- Ability to combine the TCA Quadrant Airbus Edition throttle quadrant with various

Thrustmaster joysticks (HOTAS Cougar, HOTAS Warthog, T.16000M, MFD Cougar

Pack, all of which are also compatible with T.A.R.G.E.T), allowing them to be recognized

as a single USB device.

- Access to advanced profiles created by the Thrustmaster community.

15/18

TROUBLESHOOTING AND WARNING

• My TCA Quadrant Airbus Edition throttle quadrant isn’t working properly, or seems

to be improperly calibrated.

- Power off your PC, and disconnect the USB connector for the TCA Quadrant Airbus

Edition throttle quadrant. Then reconnect the USB connector, power on your PC

again, and restart your game.

- When connecting the USB connector for the TCA Quadrant Airbus Edition throttle

quadrant, always leave the rudder axis centered if you are using the TFRP rudder

system (sold separately): never put your feet on the TFRP rudder system’s pedals

when doing so.

• I can’t configure my TCA Quadrant Airbus Edition throttle quadrant.

- In your game’s Options / Controller / Gamepad or Joystick menu, select the

appropriate configuration or completely reconfigure the controller’s options.

- For more information, please refer to your game’s user manual or online help.

- Use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical EdiTor)

advanced programming software.

• My TCA Quadrant Airbus Edition throttle quadrant is too sensitive, or not sensitive

enough.

- The axes for the TCA Quadrant Airbus Edition throttle quadrant automatically calibrate

themselves after a few movements, and after having reached the physical stops for

the axes.

- In your game’s Options / Controller / Gamepad or Joystick menu, adjust the sensitivity

and dead zones for your controller (if these options are available).

- Use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical EdiTor)

advanced programming software.

This device is intended for use with respect to gaming entertainment purposes only. It is

strictly forbidden to use this device for professional training activities.

16/18

CONSUMER WARRANTY INFORMATION

Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P.

97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster

product shall be free from defects in materials and workmanship, for a warranty period which corresponds

to the time limit to bring an action for conformity with respect to this product. In the countries of the

European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product.

In other countries, the warranty period corresponds to the time limit to bring an action for conformity with

respect to the Thrustmaster product according to applicable laws of the country in which the consumer

was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the

corresponding country, then the warranty period shall be one (1) year from the original date of purchase of

the Thrustmaster product).

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months

from the date of original purchase.

Should the product appear to be defective during the warranty period, immediately contact Technical

Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned

to its place of purchase (or any other location indicated by Technical Support).

Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option,

be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is

subject to such reconditioning, any period of at least seven (7) days during which the product is out of use

shall be added to the remaining warranty period (this period runs from the date of the consumer’s request

for intervention or from the date on which the product in question is made available for reconditioning, if

the date on which the product is made available for reconditioning is subsequent to the date of the request

for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries

(including for consequential damages) is limited to the return to working order or the replacement of the

Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of

merchantability or fitness for a particular purpose.

This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered

damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other

cause unrelated to a material or manufacturing defect (including, but not limited to, combining the

Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable

batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) if the product has

been used for any use other than home use, including for professional or commercial purposes (game

rooms, training, competitions, for example); (3) in the event of failure to comply with the instructions

provided by Technical Support; (4) to software, said software being subject to a specific warranty; (5) to

consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or

headphone ear pads, for example); (6) to accessories (cables, cases, pouches, bags, wrist-straps, for

example); (7) if the product was sold at public auction.

This warranty is nontransferable.

The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her

country are not affected by this warranty.

17/18

Additional warranty provisions

During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support

is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of

any reconditioning procedures which Technical Support may request that the consumer carry out, by way

of written instructions – for example, due to the simplicity and the lack of confidentiality of the

reconditioning process – and by providing the consumer with the required spare part(s), where

applicable).

Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not

provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose

warranty period has expired.

In the United States of America and in Canada, this warranty is limited to the product’s internal

mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any third

party for any consequential or incidental damages resulting from the breach of any express or implied

warranties. Some States/Provinces do not allow limitation on how long an implied warranty lasts or

exclusion or limitation of liability for consequential or incidental damages, so the above limitations or

exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have

other rights which vary from State to State or Province to Province.

Liability

If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries

disclaim all liability for any damages caused by one or more of the following: (1) the product has been

modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive

use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any

use other than home use, including for professional or commercial purposes (game rooms, training,

competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all

liability for any damages unrelated to a material or manufacturing defect with respect to the product

(including, but not limited to, any damages caused directly or indirectly by any software, or by combining

the Thrustmaster product with any unsuitable element, including in particular power supplies,

rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).

DECLARATION OF CONFORMITY

CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment on and off, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

18/18

COPYRIGHT

Guillemot Corporation S.A. Windows® is a registered trademark of Microsoft Corporation in the United

States and/or other countries.

All other trademarks and brand names are hereby acknowledged and are property of their respective

owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice

and may vary from one country to another. Made in China.

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union: At the end of its working life, this product should not be disposed

of with standard household waste, but rather dropped off at a collection point for the

disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.

This is confirmed by the symbol found on the product, user manual or packaging.

Depending on their characteristics, the materials may be recycled. Through recycling and

other forms of processing Waste Electrical and Electronic Equipment, you can make a

significant contribution towards helping to protect the environment.

Please contact your local authorities for information on the collection point nearest you.

For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.

Retain this information. Colors and decorations may vary.

Plastic fasteners and adhesives should be removed from the product before it is used.

This product conforms to all standards regarding children 14 years of age and older. This product is not

suitable for use by children less than 14 years of age.

www.thrustmaster.com

*Applicable to EU, UK and Turkey only

TECHNICAL SUPPORT

https://support.thrustmaster.com

WARNING: this product can expose you to chemicals including Bisphenol A (BPA), which is

known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

*

1/18

Manuel de l'utilisateur

CARACTERISTIQUES TECHNIQUES

1 2

10

11

9

8

4

5

612

3

7

ページが読み込まれています...

Thrustmaster 2960858 ユーザーマニュアル

このマニュアルも適しています

Thrustmaster 2960858 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント