For the Best Audio experience,it is recommended your right
size silicone earcaps and,please put your cellphones on the
same side of left earphone during outdoor.
Product details
Usage
Compatibility
This product is compatible with all Bluetooth-enabled
mobile phones (iOS/Android/Windows Phone), tablet PCs,
smart watches, notebooks and desktop computers.
I26 True Wireless Stereo Earphones
User manual
Imported Wireless 5.1 chips
Warranty card
Warranty period:
12 months from the date of purchase
Free of charge service:
Customer service information
Dealer
Customer Name
Customer Phone
Customer Address
Model Number
Purchase Date
Invoice number
The warranty does not apply under the following circustance:
2,Damage caused due to the product being disassembled
by a non-authorized repair agent.
3,
Damage caused by external force or when there is visible
deformation of any of the external parts.
4,
The product has been improperly used or stored.
5,
Damage or breakdown caused by force majeure.
6, Other situations similar to the above.
1,The product label is broken.
During the warranty period, if there is any breakdown caused
by the products' build quality please contact the seller and
provide this warranty card together with the sales invoice.The
product will be repaired or replaced by a new one.
L R
Type-C charging port
10
9Earphone LED Indicator
6
4
5
7Touch Button
Microphone
8
3
1Charging bin digital display
Charging pin
2Powering OFF
Method 2: When the earphones are OFF,Keep the touch button
of both earphones for 3-5 seconds.The Led light
flashes once and with a sound prompt:“power on”.
Powering ON:
Method 1: Take out the earphones from the charging case, and
they will “power on”
Method 1: The earphones will switch off when put into the
charger case.
Method 2: Keep the earphones touch button pressed for 3-5
seconds, until the Blue LED flashes with a sound
prompt: “power off”.
Note: If the earphones connected the device once, and the
bluetooth functions of device was open, the earphones
will be reconnected with last device automatically.
Note: If the earphones were disconnect with the device,
the earphones will be power off automatically after 5mins.
2
Open the bluetooth devices page inside settings.Search
for “i26” and select it to pair,the Earphone lights be o
ff after
the earphones connected with device.
2Keep press the touch button for 1 seconds and release it
(“L”for previous song, “R”for next song)
3Touch the button twice to adjust the volume(“L”for
decreasing ,”R” for increasing)
1Touch the button once to Pause/Play.
Play Music:
Setting
Bluetooth
Bluetooth
My device
Touch the button three times to activate the Siri voice assistant
Voice Assistant:
3During a call, the volume can be controlled via the
mobile phone.
4Stereo mode:both ears have voice.
1When a call comes in, short press one of the touch buttons
in order to answer the call or long press it to reject it.
2During a phone call, short press the earphone button
to end the call and the earphone will resume its previous
working state.
Calling:
Stereo Mode:
1
Taking the earbuds out of the charging box, they will auto
power on. After a few seconds, the left and right earbuds
will auto connect each other.When the TWS earbuds are
connected to each other, the LED light will flash quickly.If they
connect successfully, the earbuds LED light will flash slowly.
1
Host device is a connection between second device
and your mobile phone it is normal status under high
power condumption.
3
On iPhones the battery level of the earphones will be
displayed in real time.
4
When the earphones and the charger case are not used
for long periods of time, it is recommended to keep them
a dry place and to recharge them at least every 2 months.
5
It is recommended to gently wipe the spring needle and copper
column with a cotton swab on a regular basis to achieve a
cleaning effect. Never use liquids to clean the earbuds.
2
When not connected to any device, the earphones will
power off automatically after 5 minutes.
Important:
Note: When the earbuds is not charging, you can use a cotton
swab to gently wipe the spring needle and copper post.
R earphone blue
light flashes
L earphone blue
light flashes
Keep the touch button
pressed for 3 seconds
gree light flashing
Bluetooth version: V5.1
Maximum transmission range: 15M
Working temperature range: -10+50
RF Sensitivity: -92dBm
Operating frequency: 2.40 GHZ-2.48 GHZ
Bluetooth profiles supported: HFP/A2DP/AVRCP
waterproof: IPX7
Music playing time: About 5-7h*4Times
Earphone Charge time
: Around 1.5hour
Battery capacity: 2*3.7V/50mAh
Voltage rating and energy capacity: 3.7V/500mAh
Earphone *2 Charging case *1
Earcaps *4(L\ S)
User manual *1
USB cable *1
Packing list:
Can’t power on
No charging indication
Automatically shut down
The Earbuds have
an echo
Small sound
Signal intermittent
Earbuds have no sound
The Earbuds are noisy
Cause Solutions
Earbuds are low battery/
Crash
The Earbuds are not well put into/
There are foreign objects in the
spring needle and copper column
Earbuds are low battery
The volume is too high or
the environment is too noisy
wearing Earbuds incorrectly
or the volume is too low
Outside environment interference
or too far away from mobile phone
Pairing unsuccessful
between L and R Earbuds
Outside environment interference
or too far away from mobile phone
Adjust Earbuds position/
Clean the spring needle and
copper column
charge the Earbuds
Adjust the volume or
change position
Adjust the Earbuds position
or the mobile phone volume
Change to better environment or
move closer to the mobile phone
Put the earphones into the
charger case
Change position,or move
closer to the mobile phone
Fault:
Fault
Charge the Earbuds/Keep the
earphones touch button pressed
for 8 seconds
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including
interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction
FCC ID: 2AQ27-I26
Because the earbus is too small, the FCC ID number can only be
printed on the charging box.