CATTA

DZOFILM CATTA ユーザーマニュアル

  • こんにちは!このDZOFILM CATTA ACEシリーズズームレンズのマニュアルを読み終えました。レンズの仕様、操作方法、後焦調整方法などについてご質問にお答えします。お気軽にご質問ください!
  • レンズの清掃方法は?
    後焦調整とは何ですか?
    保証期間は?
CATTA ACE ZOOM LENS
USER’S MANUAL
无邪Ace变焦镜头使用说明书
www.dzofilm.com
电影镜头
CINE LENS
Contents
Introduction
Safety Notes
Lens Parts
Lens Control
Flange Back Adjustment
. Flange Back Adjustment
Specification
Aer-sales Service
The Name and Content of Hazardous Substances
. Preparation
Click to go
Users can read the table of content(TOC) to have an overview of the
Gnosis Product Manual. Please clink on the title or link to jump to the TOC
Search keyword
The Search-keyword Function is available in PDF Document. For
In WPS Office, Windows users can search keywords with the keyboa
shortcut <Ctrl+F> and Mac users can execute the same function with
shortcut <Command+F>
Note
Introduction
Please do not watch the sun or bright light source through the lens, otherwise
it will cause visually disabled.
Never use organic solvents such as paint thinner or benzene to clean the lens.
Attach the front and rear caps when the lens is not in use.
Store the lens and filter in cool, dry locations to prevent mold and rust. Do not
store in direct sunlight or with naphtha or camphor moth balls.
Please keep the lens dry and wipe the water droplets off if there are water
droplets on the glass surface.
Leaving the lens near heater or in other extremely hot locations could cause
damage or warping.
Use a blower to remove dust and lint from the glass surfaces of the lens or
filter. To remove smudges and fingerprints, apply a small amount of lens
cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the
center outwards using a circular motion. Do not leave smears or touch the glass
with your finger.
Thank you for your purchase of this product !
CATTA ACE is DZOFILM’s high-performance full frame cinema zoom lens. It allows
you to reproduce the details and color in filming. Clear images, natural transition from
in-focus to defocus and minimal breathing in focusing...all these can be found in CATTA
ACE Zoom. A good companion for your documentory/ TVC/ MV/ commercials/ online
movie/ variety show/ Live/ independent films, etc. This manual is applicable to the
whole series of CATTA ACE lenses which includes 18-35mm, 35-80mm and 70-135mm.
Safety Notes
1
Back to Contents
Lens Parts
Front Cap
Lens Mark
Focusing Ring
Screw Holes for Accessories*
M, mm deep
Zoom Ring
Zoom Lever Socket
Aperture Ring
Rear Cap
Support Base
2
Back to Contents
Lens Control
Focus Control
Rotate the focus ring to increase or decrease the focus distance.
Zoom Control
Rotate the zoom ring to zoom out, increasing the area visible in the frame or zoom in
on the subject so that it fills a larger area in the frame.
Aperture Control
Rotate the aperture ring to stop aperture down, raising the T-stop and narrowing the
aperture, or lower the T-stop to widen the aperture.
3
Back to Contents
Flange Back Adjustment
Note : You can download and print the chart on DZOFILM website-Download-Star
Chart for Adjusting Back FlangeClick to jump to the website
Step Two : Aach the lens to the camera;
Step Three : Select the maximum aperture (wide open);
Step Four : Set the object .m away from the camera sensor plane, and adjust it
to the center of the whole image.
4
.Preparation
.Flange Back Adjustment
DZOFILM will check and adjust flange back distance of all CATTA ACE lenses
before shipping. But the flange back distance might have slight difference among
different cameras. To achieve the best performance and match different cameras,
flange back adjustment is needed.
Step One : Rotate the zoom ring to the longest focal length, and rotate the focus
ring until the image to its clearest, mark down the focusing distance S;
Step Two : Rotate the zoom ring to the widest focal length and rotate the focus ring
until the image to its clearest, mark down the focusing distance S;
Step Three : Compare the difference between S and S. If S<S, then need to add
shims; otherwise decrease the shims,
Note : The shim adjustment is evaluated on the angle between S and S. If the
angle is bigger, then need to change more shims and vice versa.
Step Four : Repeat step until S=S. Then it means the lens in under parfocal.
Step One : Ready your subject. You can use a "Star Chart", or other high-resolution
black-and-white objects;
Back to Contents
Maximum aperture
Set the object .m away from the camera sensor plane,
and adjust it to the center of the whole image.
Rotate the focal length to mm, and focus till the image is at its sharpest, the focusing
distance mark is .m S. And then rotate the zoom ring to mm, re-focus to the
image at its sharpest, current focusing distance mark is .m (S). S<S. According to
the sheet below, add .mm shims on the lens mount and double check. At this time,
both mm and mm focus at the closest under . focus mark. That means this lens is
under parfocal.
Take CATTA ACE zoom mm as an example
5
Back to Contents
1.5m
Φ
mm shim adjustment reference
mm focusing
mark Sm
Shim
adjustmentmm
mm focusing
mark Sm
mm shim adjustment reference
mm focusing
mark Sm
mm focusing
mark Sm
Shim
adjustmentmm
.
.
. . . . .
. . . . . .
. . . . .
. . .
. . . . . . . .
mm shim adjustment reference
mm focusing
mark Sm
Shim
adjustmentmm
mm focusing
mark Sm.
. . . . . . . .
. . . . . . . .
Note: Shim adjustment: "+" means adding shims, and "-" decreasing shims.
6
Back to Contents
CATTA ACE Adjustment Reference
Specification
Specification
Focal Length
Mount
Aperture
Image Circle
Close Focus
(Metric/ Imperial)
Zoom Ratio
Mag. Ratio
(Close Focus)
Flange Distance
Iris Control
Focus Control
Zoom Control
Front Dia.
(Metric/Imperial)
Filter Size
Length
(Metric/Imperial)
Iris Blade 
gg g
From lens front plane to flange back:
.mm/."PL;.mm/."(EF/LPL)
M
Φmm/."
Manual, max °
Manual, max °
Manual, max °Manual, max °Manual, max °
.m/in.m/in
.X.X
mm: .
mm: .
mm: .
mm: .
mm: .
mm: .
.X
Φ.mm
(Vista Vision)
Φ.mm
(Full Frame)
PL=mm,EF/LPL=mm
T.
PL/EF/LPL
.m/in
Weight
mmmm mm
7
Back to Contents
Aer-sales Service
Repairs : Return the product to the point of purchase for repairs. Please note that we
reserve the right to refuse service in the event of damage so severe that there is lile
hope of function being restored, whether said damage is caused by physical shocks,
exposure to or immersion in sand, mud, or water or the like.
Warranty service : Should the product malfunction in the course of normal use as set
forth in the user's manual and accompanying documentation, it may be returned to the
point of purchase for repairs within warranty period. The owner is responsible for all
shipping costs. The warranty period varies with the country or region of purchase.
Stored dated receipts or other proof of purchase in a safe place, as it will be required
for repairs made under warranty.
Service Outside the Warranty Period : Request for service will normally be accepted
within a period of roughly 5 years following the end of production, during which time
spares will be kept on hand, although owners may be offered an equivalent product
during this period in the event that spares are not available. Compatibility with
consumables and accessories for the original product is not guaranteed. To prevent
waste, repairs or replacement may be made using refurbished parts or products, and
DZOFILM may collect returned parts or products for later use. When returning a
product for repair, please let us know if you need the original parts.
Privacy : DZOFILM obeys all applicable laws and regulations concerning the handling
of names, addresses, phone numbers, and other personal information provided by
users.
8
Back to Contents
The Name and Content of Hazardous Substances
Hazardous Substances
Part Name
Lens Shell
Inner Mechanics
Optics
Other Parts
This table is formulated in accordance of SJ/T.
:Indicates that the concentration of the hazardous substance of at least
one of all homogeneous materials in the parts may be above the relevant
threshold of the GB/T standard.
Pb Hg Cd Cr(VI) PBB PBDE
:Indicates that the concentration of the hazardous substance in all
homogeneous materials in the parts is below the relevant threshold of
the GB/T standard.
The "" in the above table indicates that there are one or more exemptions
are applied in the parts stated in RoHS //EU.
9
Back to Contents
简介
安全注意事项
镜头部件
镜头控制
后焦调节
1.准备工作
2.调节后焦
技术规格
售后服务
产品中有害物质的名称及含量
1
1
2
3
4
4
4
6
7
8
目录
点击跳转
用户可以通过目录了解说明书整体结构点击标题或链接即可跳转到相应页
面。
快速搜索关键词
PDF电子文档可以使用查找功能快速搜索关键词例如WPS PDF文档
Windows用户使用快捷Ctrl+FMac用户使Command+F即可快速搜索关
键词。
阅读小贴士
请勿透过镜头或相机观看太阳或明亮的光源否则会使视力受损;
切勿使用涂料稀释剂或苯等有机溶剂清洁镜头;
不使用镜头时请盖上镜头前后盖;
为防止发霉请将镜头和滤镜存放在阴凉、干燥的地方切不可存放在直射
阳光下也不要与石脑油或樟脑丸放一起;
请保持镜头干燥如受潮或有水滴请擦拭干净后存放;
勿将镜头放置在加热器旁或其他极其炎热的地方可能导致损坏或变形;
请使用吹气球去除镜头或滤镜玻璃表面的灰尘若要去除污点和指纹可用一
块滴有少许镜头清洁剂的干净软绵布或镜头清洁纸以圆周运动方式从里向
外进行清洁注意不要留下污渍,也不要用手指触摸玻璃;
安全注意事项
简介
感谢您购买本系列产品!
无邪ACE(CATTA ACE)系列是DZOFILM旗下的全画幅高性能变焦镜头可以让
您在视频创作时还原拍摄细节色彩通透、过渡均匀自然。适合在纪录片、MV、中型
商业片、网络电影、直播等场景使用较小的呼吸效应使画面焦点转换更自然。本说
明书适用于无邪ACE(CATTA ACE)全系列包括18-35mm,35-80mm70-135mm。
1
回到目录
镜头前盖
镜头标记
对焦环
附件扩展孔位*10(M3,深3mm
变焦环
变焦拨杆
光阑环
卡口后盖
支撑座
6
7
8
9
1
2
3
4
5
2
镜头部件
回到目录
3
镜头控制
对焦控制
旋转对焦环可增加或减少对焦距离,从而调整画面中的焦点位置。
变焦控制
旋转变焦环可放大或缩小画面中的可视区域以及被摄主体的大小
光圈控制
旋转光圈环可放大或缩小光孔直径,调整画面明暗度以及被摄主体的背景虚化效果。
回到目录
4
1.准备工作
2.调节后焦
后焦调节
无邪ACE系列镜头在出厂前会按照标准调整后焦但不同相机的法兰距在出厂
时可能会有一点不同为了方便与不同的相机匹配,达到最佳成像效果,需要进行
后焦调节操作。
重复 1-2 步骤直到S2等于S1时,说明镜头已处于齐焦状态,完成后焦
调节。
准备好拍摄对象。可使用“星状测试图”或使用其他黑白相间的、对比
度较高的拍摄对象;
步骤二 : 镜头安装到相机或摄影机上;
镜头调整为最大光圈;
将拍摄对象放置在距离相机成像面约1.5米处并调整其位置在画面
中心。
步骤三 :
步骤四 :
步骤一
步骤一 旋转变焦环至最长焦端然后旋转对焦环至画面最清晰状态,记下此时
的对焦刻度值S1
步骤二 旋转变焦环至最广角端然后旋转对焦环至画面最清晰状态,记下此
时的对焦刻度值S2;
步骤三 对比S2与S1的大小若S2小于S1,则需要增加后焦垫片;若S2大于S1
则需要减少后焦垫片;
步骤四
提 示 垫片的调整量与S1S2的差值对应的对焦环旋转角度有关,旋转角度
越大需要调整的垫片越多,反之亦然;
提 示 可前往DZOFILM官网-资料下载-后焦调整星图处下载(点击此处跳转
回到目录
5
以CATTA ACE zoom 35-80mm为例假设镜头变焦至80端,对焦至画面最清晰
对焦刻度值为1.5m,再将镜头变焦至35端,重新对焦至画面最清晰时对焦刻度
值为1.4m比1.5m小,参考下方“后焦垫片调整参考表”将后焦垫片增加0.12mm
重新确认,80端和35端,画面最清晰时对焦刻度值都在1.5m说明镜头已处于
齐焦状态后焦调节完成
例:
1.5m
将拍摄对象在距离相机成像画面“Φ”标记处约1.5m放置
将拍摄对象位于画面中心。
最大光圈
Φ
回到目录
35-80mm后焦垫片调整参考表
35端对焦
刻度值S2(m)
后焦垫片
调整参考值(mm)
80端对焦
刻度值S1(m)
70-135mm后焦垫片调整参
135端对焦
刻度值S1
(m)
70端对焦
刻度值S2
(m)
后焦垫片
调整参考值
(mm)
1.5
1.5
1.2 1.3 1.4 1.5 1.6
1.4 1.45 1.5 1.55 1.6 1.65
+0.3 +0.13 0-0.1 -0.22 -0.3
1.7 1.8 22.2
+0.3 +0.19 +0.12 0-0.08 -0.13 -0.18 -0.23 -0.3
18-35mm后焦垫片调整参考表
18端对焦
刻度值S2(m)
后焦垫片
调整参考值(mm)
35端对焦
刻度值S1(m) 1.5
1.1 1.2 1.3 1.4 1.5 1.6 1.8 22.5
+0.4 +0.27 +0.18 +0.08 0 -0.07 -0.19 -0.25 -0.45
6
提示 : 后焦垫片调整值“+”代表要增加垫片“-代表要减少垫片。
无邪ACE(CATTA ACE系列后焦调整表
回到目录
7
技术规格
焦距
卡口
光圈
最大像面
最近对焦距离
(米制/英制
变焦倍率
放大倍率
(最近对焦位置
法兰距
光圈控制
对焦控制
变焦控制
前端直径
(米制/英制
滤镜直径
长度
(米制/英制
叶片数量 16
1635g1850g 1710g
从镜头前端面至法兰面:
179.5mm/7.07"(PL;187.5mm/7.38"(EF/LPL)
M77
80mm/3.15"
手动(旋转最多270°
手动(旋转最多100°
手动(旋转最多80°手动(旋转最多75°手动(旋转最多77°
0.74m/2ft5in0.51m/1ft8in
1.9X 2.3X
35端最近距离的
放大倍率:0.0657
80端最近距离的
放大倍率:0.146
18端最近距离的
放大倍率:0.064
35端最近距离的
放大倍率:0.118
70端最近距离的
放大倍率:0.112
135端最近距离的
放大倍率:0.214
1.9X
46.5mm
(Vista Vision43.5mm(Full Frame)
PL=52mmEF/LPL=44mm
T2.9-22
PL/EF/LPL
0.76m/2ft6in
重量
35-80mm18-35mm 70-135mm
技术规格
回到目录
8
售后服务
维修:请将本产品送回至销售点进行维修。请注意当损坏过于严重以致功能无法
恢复时不论该损坏是因碰撞、火烧还是浸没于沙土、水中等原因所致我们均保留
拒绝服务的权利。
保修服务:若产品是在按照用户手册正常使用期间发生故障您可在保修期内将其
送回至销售点进行维修用户需承担所有运费保修期根据出售国或销售地的不同
而异;由于在保修期内进行维修时将需要使用收据或购买凭证请将注明日期的收
据或其他购买凭证存放在稳妥的地方。
保修期外的服务:本产品的配件可在生产后大约持有5年用户一般可在此期间请
求维修、更换服务但在配件不可用的情况下,可能为用户提供同等产品。此时与原
产品耗材和配件的兼容性不予保证。为杜绝浪费维修或更换可能会采用翻新部件
或产品并且DZOFILM可能会收集返修部件或产品以供日后使用。产品返修时
告知我们是否需要原装部件。
隐私:DZOFILM遵循所有关于处理用户所提供的姓名、地址、电话号码以及其他个
人信息的现行法律和法规。
回到目录
/