Contec IPC-BX955D-DC 取扱説明書

タイプ
取扱説明書
IPC-BX955 Fedora 12 インストール確認書
Fedora-12-i386-DVD.iso
- 2 -
目次
1 調査環境 .................................................................................................................................................. - 3 -
1.1 ハードウェア ...............................................................................................................................
..... - 3 -
1.2 ソフトウェア ...............................................................................................................................
..... - 3 -
2 調査項目の手順と結.............................................................................................................................- 4 -
2.
1 Console 日本
語入力 .........................................................................................................................- 4 -
2.2 シリアルポート...............................................................................................................................
.. - 5 -
2.3 LINE出力 .........................................................................................................................................- 6 -
2.4 LINE入力 .........................................................................................................................................- 7 -
2.5 CF .....................................................................................................................................................- 8 -
2.6 PowerM
anagement..........................................................................................................................- 9 -
2.6.1 S1, S3
, S4 ステート....................................................................................................................- 9 -
2.6.2 S5 ステート ................................................................................................................................- 9 -
3
...............................................................................................................................
........................ - 10 -
3.1 メモリの確認 ...............................................................................................................................
... - 10 -
3.2 runlevel対応サ
ービス..................................................................................................................... - 10 -
3.3 CPU情報 ......................................................................................................................................... - 11 -
3.4
メモリ情報 ...............................................................................................................................
....... - 12 -
3.5 カーネル モジュ
ールメッセージ....................................................................................................- 13 -
3.6 PCI Device情報 ..............................................................................................................................- 22 -
3.7
システムロードモジュール.............................................................................................................- 22 -
3.
8 バージョン情報...............................................................................................................................- 23 -
3.
9 IRQ利用情報................................................................................................................................... - 23 -
3.10 I/Oポート利用
........................................................................................................................ - 23 -
1 調査環境
- 3 -
1 調査環境
1.1 ハードウェア
IPC-BX955
ハードウェアの詳細なスペックについては、ユーザーズマニュアルを参照してください。
1 ハードウェアの接続形態
※マウス、モニタ等は省略しています。
※マイクが無い場合(マイク感度が悪く音が拾えない場合)は、マイク代替として PC Line-OUT から Line-IN
へ直接接続でも可能です。
1.2 ソフトウェア
本調査で使用したディストリビューションについては以下の通りです。
Fedora 12
バージョン情報
[root@f12d4g ~]# cat /proc/version
Linux version 2.6.31-127.fc12.i686.PAE (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.4.2
20091027 (Red Hat 4.4.2-7)(GCC) ) #1 SMP Sat Nov 7 21:25:57 EST 2009
[root@f12d4g ~]#
汎用 PC(Windows XP)
IPC-BX955(Linux)
LAN 1
イヤフォン
COM 1
LAN 1 COM 2
クロスケーブル
クロスケーブル
2 調査項目の手順と結果
- 4 -
2 調査項目の手順と結果
本調査では以下の内容を調査致しました。また、インストール後に行った調査に関しましては、root 権限にて
実行しています。
1 調査結果
2.1 Console 日本語入力
GNOME 画面上で「Ctrl + space」または「半角/全角 キー」を押下します。
画面右下に日本語のコントロールが表示され、日本語が入力できることを確認します。
調査項目 確認内容 結果 備考
OS
USB 接続メディアよりインストール出来る事
正常に通常インストールが可能
メモリ free の内容確認 付録参照
キーボード インストール時及び OS 入力後共正常
マウス インストール時及 OS 入力後共正常
USB
CD/DVD
キーボード、マウスが正常に動作する事
インストール DVD からインストール作業が正常
に行える事
インストール時正常認識
OS ンストール後 auto mount 確認
日本語入力 日本語入力を行い表示できる事
DVI ディスプレイを接続し正しく表示される事
シリアルポート シリアルポートより通信が出来ること
ライン出力 イヤフォンを接続し音の出力が確認出来る事 イヤフォンにて音声確認
マイク入力 外部から音声入力し録音出来る事 ライン出力から入力し録音
LAN DHCP でネットワーク情報が取得出来る事
DHCP サーバよ IP address 取得確認。
Yum にてパッケージインストールが可能
CF
FAT32 でフォーマットした CF を CF2 に挿入し、
読み書きすることができるか。
スタンバイ(S1 ステート)動作 正常動作
サスペンド(S3 ステート)動作
IPC-BX955 BIOS がサポートしていないため。
ハイバネーション(S4 ステート)動作
IPC-BX955 BIOS がサポートしていないため。
Power
Management
システム終了時の電源 OFF(S5 ステート)動作 正常動作
2 調査項目の手順と結果
- 5 -
2.2 シリアルポート
文字列の送受信テスト
IPC-BX955 COM1 COM2 にクロスケーブルを用いて接続します。
ターミナルウインドウを2つ起動してください。片側のターミナルウインドウで、以下のコマンドを入力して
ください。このコマンドを入力した方が受信側となります。
[root@localhost ]# cat /dev/ttyS0
[root@localhost ]#
もう片方が送信側です。以下のコマンドを入力して文字列(aiueo)を送信してください。
[root@localhost ]# echo aiueo > /dev/ttyS1
[root@localhost ]#
受信側のターミナルウインドウに送信側のターミナルウインドウから送信したテキストが表示されれば、正常
に通信が出来ています。以下の画面が表示されます。
2 調査項目の手順と結果
- 6 -
2.3 LINE出力
デスクトップのタスクバーより、「システム」→「設定」→「サウンド」を開きます。
以下の画面が表示され、ラジオ釦を押すとイヤフォンに音が出力されるのを確認します。
2 調査項目の手順と結果
- 7 -
2.4 LINE入力
録音と再生
録音を行う場合、まずマイクの接続、または LINE-OUT LINE-IN の接続を行って下さい。
その後録音の設定としまして、ALSA ユーティリティのミキサーコマンドよりマイクの設定が Caprure [on]
の状態か確認し,off であれば capture [on]に設定してください。
[root@localhost ]# amixer –c 0
<省略>
<省略>
[root@localhost ]# amixer –c 0 set Mic 100% unmute cap Capture off の場合、実行する)
[root@localhost ]#
IPC-BX955 機にて録音を行います。LINE-OUT LINE-IN の接続を行っている場合、エラー! 参照元が見
つかりませんの操作を行い、音を出力してください。
[root@localhost ]# arecord -t wav -d 15 -f dat test1.wav
録音中 WAVE ‘test1.wav’ : Signed 16bit Little Endian, レート 48000 Hz, ステレオ
[root@localhost ]#
録音したファイルの再生を行います。
[root@localhost ]# aplay test1.wav
再生中 WAVE ‘test1.wav’ : Signed 16bit Little Endian, レート 48000 Hz, ステレオ
[root@localhost ]#
2 調査項目の手順と結果
- 8 -
2.5 CF
FAT32でフォーマットしたCF (容量4.0GB)をCF2スロットに挿入し、BX955の電源をONします。
Linux起動後、デスクトップ操作メニューの「場所」「ファイルシステム 4.0GB(容量の表示はCF容量に
依存します)」が表示され、自動的にマウントされていることを確認します。
下記コマンドの「74A-1B48は自動的にマウントが行われ名前が設定されたものなので、同じディレクトリ
名になるとは限りません。
端末上よりマウント状況の確認を行います。
[root@localhost ]# mount
<省略>
/dev/sdb1 on /media/74A-1B48 type vfat (rw)
[root@localhost ]#
テキストファイルの読み書きを行います。
[root@localhost ]# echo hello > /media/74A-1B48/hello.txt
[root@localhost ]# cat /media/74A-1B48/hello.txt
hello
[root@localhost ]#
アンマウントを行い、ファイルが読めなくなる事を確認します。
[root@localhost ]# umount /media/74A-1B48
[root@localhost ]# ls /media/74A-1B48
[root@localhost ]#
マウントを行い、ファイルが読めるようになる事を確認します。
[root@localhost ]# mount -t vfat /dev/sdb1 /media/74A-1B48
[root@localhost ]# ls /media/74A-1B48
[root@localhost ]#
2 調査項目の手順と結果
- 9 -
2.6 PowerManagement
2.6.1 S1, S3, S4 ステー
パワーマネジメントステータスを確認し、サスペンド処理が使用可の状態か確認を行います。
1
[root@localhost ]# cat /sys/power/state
standby disk
[root@localhost ]#
このシステムは、スタンバイ(standby)とハイバネーション(disk)をサポートしていると表示されますが
IPC-BX955 BIOS はハイバネーションをサポートしていないため、ご利用になれません。
2 /sys/power/state
出力文字 意味 ACPI 状態 関連コマンド
standby
スタンバイ
S1
mem
サスペンド
S3 pm-suspend
disk
ハイバネーション
S4 pm-hibernate
スタンバイ機能(ACPI S1 ステート)は、以下で動作を確認することができます。
[root@localhost ]# echo -n standby > /sys/power/state
スタンバイ状態に遷移したら、電源スイッチを ON してください。
Linux の復帰を確認できます。
2.6.2 S5 ステート
シャットダウンコマンドを実行してください。
シャットダウン終了後、本体の電源が OFF になることを確認できます。
[root@localhost ]# shutdown -h now
1
http://www.linux.or.jp/JF/JFdocs/kernel-docs-2.6/power/states.txt.html
http://netlog.jpn.org/r271-635/2008/06/centos_52.html
3
- 10 -
3
3.1 メモリの確認
[root@f12d4g ~]# free
total used free shared buffers cached
Mem: 1017912 340976 676936 0 24572 169064
-/+ buffers/cache: 147340 870572
Swap: 196600 0 196600
[root@f12d4g ~]#
3.2 runlevel対応サービス
[root@f12d4g ~]# chkconfig --list
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
abrtd 0:off 1:off 2:off 3:on 4:off 5:on 6:off
acpid 0:off 1:off 2:on 3:on 4:on 5:on 6:off
atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
auditd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
avahi-daemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off
bluetooth 0:off 1:off 2:off 3:on 4:on 5:on 6:off
btseed 0:off 1:off 2:off 3:off 4:off 5:off 6:off
bttrack 0:off 1:off 2:off 3:off 4:off 5:off 6:off
cpuspeed 0:off 1:on 2:on 3:on 4:on 5:on 6:off
crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off
cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off
dnsmasq 0:off 1:off 2:off 3:off 4:off 5:off 6:off
firstboot 0:off 1:off 2:off 3:off 4:off 5:off 6:off
haldaemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off
httpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ip6tables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
irda 0:off 1:off 2:off 3:off 4:off 5:off 6:off
irqbalance 0:off 1:off 2:off 3:on 4:on 5:on 6:off
lvm2-monitor 0:off 1:on 2:on 3:on 4:on 5:on 6:off
mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off
messagebus 0:off 1:off 2:on 3:on 4:on 5:on 6:off
microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off
multipathd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
netconsole 0:off 1:off 2:off 3:off 4:off 5:off 6:off
netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off
netplugd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:off 3:off 4:off 5:off 6:off
nfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off
nfslock 0:off 1:off 2:off 3:on 4:on 5:on 6:off
nscd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ntpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ntpdate 0:off 1:off 2:off 3:off 4:off 5:off 6:off
openvpn 0:off 1:off 2:off 3:off 4:off 5:off 6:off
pcscd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
portreserve 0:off 1:off 2:on 3:on 4:on 5:on 6:off
psacct 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rdisc 0:off 1:off 2:off 3:off 4:off 5:off 6:off
restorecond 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rpcbind 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rpcgssd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
rpcidmapd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
rpcsvcgssd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rsyslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off
saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
sendmail 0:off 1:off 2:on 3:on 4:on 5:on 6:off
smartd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
smolt 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmptrapd 0:off 1:off 2
:
off 3:off 4:off 5:off 6:off
sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
udev-post 0:off 1:on 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off
[root@f12d4g ~]#
3
- 11 -
3.3 CPU情報
[root@f12d4g ~]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc
arch_perfmon pebs bts pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm
bogomips : 3191.84
clflush size : 64
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz
stepping : 2
cpu MHz : 1600.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc
arch_perfmon pebs bts pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm
bogomips : 3191.49
clflush size : 64
power management:
[root@f12d4g ~]#
3
- 12 -
3.4 メモリ情報
[root@f12d4g ~]# cat /proc/meminfo
MemTotal: 1017912 kB
MemFree: 105660 kB
Buffers: 57452 kB
Cached: 641684 kB
SwapCached: 0 kB
Active: 490296 kB
Inactive: 319976 kB
Active(anon): 139468 kB
Inactive(anon): 156 kB
Active(file): 350828 kB
Inactive(file): 319820 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 131976 kB
HighFree: 252 kB
LowTotal: 885936 kB
LowFree: 105408 kB
SwapTotal: 196600 kB
SwapFree: 196600 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 111132 kB
Mapped: 59564 kB
Slab: 82176 kB
SReclaimable: 58048 kB
SUnreclaim: 24128 kB
PageTables: 6908 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 705556 kB
Committed_AS: 567084 kB
VmallocTotal: 122880 kB
VmallocUsed: 7764 kB
VmallocChunk: 101820 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 12280 kB
DirectMap2M: 894976 kB
[root@f12d4g ~]#
3
- 13 -
3.5 カーネル モジュールメッセージ
[root@f12d4g ~]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.5-127.fc12.i686.PAE ([email protected].phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7
21:25:57 EST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS)
BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data)
BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3f6e0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-back
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask 0C0000000 write-back
1 base 03F800000 mask 0FF800000 uncachable
2 base 03F700000 mask 0FFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1016MB, range: 8MB, type UC
reg 2, base: 1015MB, range: 1MB, type UC
total RAM coverred: 1015M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 10000-18000
RAMDISK: 37535000 - 37fefbf4
Allocated new RAMDISK: 00afb000 - 015b5bf4
Move RAMDISK from 0000000037535000 - 0000000037fefbf3 to 00afb000 - 015b5bf3
ACPI: RSDP 000f9280 00014 (v00 IntelR)
ACPI: RSDT 3f6e3000 00034 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3f6e3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3f6e3100 0561F (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 3f6e0000 00040
ACPI: MCFG 3f6e87c0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 3f6e8740 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SSDT 3f6e8e60 00482 (v01 PmRef CpuPm 00003000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
128MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
3
- 14 -
node 0 bootmap 00014000 - 0001aec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000af1210] TEXT DATA BSS ==> [0000400000 - 0000af1210]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0000af2000 - 0000afa0be] BRK ==> [0000af2000 - 0000afa0be]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#7 [0000afb000 - 00015b5bf4] NEW RAMDISK ==> [0000afb000 - 00015b5bf4]
#8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
found SMP MP-table at [c00f4f90] f4f90
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x0003f6e0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003f6e0
On node 0 totalpages: 259695
free_area_init_node: node 0, pgdat c0995ba0, node_mem_map c15b6200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 258 pages used for memmap
HighMem zone: 32736 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 3f700000 (gap: 3f700000:a0900000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages at c1daa000, static data 37788 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665
Kernel command line: ro root=/dev/mapper/vg_f12d4g-lv_root LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=jp106 rhgb quiet
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5195840 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000375fe:0003f6e0)
Memory: 1006088k/1039232k available (3569k kernel code, 32304k reserved, 2214k data, 448k init, 131976k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc09a7000 - 0xc0a17000 ( 448 kB)
.data : 0xc077c76f - 0xc09a6028 (2214 kB)
.text : 0xc0400000 - 0xc077c76f (3569 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 1595.922 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.84 BogoMIPS (lpj=1595922)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
3
- 15 -
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Counters: Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic counters: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose counters: 3
... counter mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20611 entries in 41 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.49 BogoMIPS (lpj=1595746)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6383.33 BogoMIPS).
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=500 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 9:53:12 Date: 03/11/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
3
- 16 -
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: reg 10 io port: [0xf000-0xf0ff]
pci 0000:00:1e.2: reg 14 io port: [0xfa00-0xfa3f]
pci 0000:00:1e.2: reg 18 32bit mmio: [0xfdffe000-0xfdffe1ff]
pci 0000:00:1e.2: reg 1c 32bit mmio: [0xfdffd000-0xfdffd0ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4000 (mask 007f)
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0xf800-0xf80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfdde0000-0xfddfffff]
pci 0000:01:00.0: reg 18 io port: [0xcf00-0xcf1f]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfd9e0000-0xfd9fffff]
pci 0000:02:00.0: reg 18 io port: [0xbf00-0xbf1f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: IRQ 4 override to edge, high
pnp 00:07: IRQ 3 override to edge, high
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x680-0x6ff has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:09: ioport range 0x400-0x4bf could not be reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0xf0000-0xfffff could not be reserved
system 00:0c: iomem range 0x3f6e0000-0x3f6fffff could not be reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
3
- 17 -
system 00:0c: iomem range 0x100000-0x3f6dffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved
system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0c: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0xc000-0xcfff
pci 0000:00:1c.0: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:1c.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0xb000-0xbfff
pci 0000:00:1c.1: MEM window: 0xfd900000-0xfd9fffff
pci 0000:00:1c.1: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0xd000-0xdfff
pci 0000:00:1e.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:1e.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:01: resource 2 pref mem [0xfda00000-0xfdafffff]
pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:02: resource 1 mem: [0xfd900000-0xfd9fffff]
pci_bus 0000:02: resource 2 pref mem [0xfd800000-0xfd8fffff]
pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 10986k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1268301192.475:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1729
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
ACPI: SSDT 3f6e8840 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
processor LNXCPU:00: registered as cooling_device1
ACPI: SSDT 3f6e8d00 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
processor LNXCPU:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (49 C)
isapnp: Scanning for PnP cards...
3
- 18 -
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
3
- 19 -
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.i686.PAE uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16238 buckets, 64952 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 2:100:879
rtc_cmos 00:03: setting system clock to 2010-03-11 09:53:14 UTC (1268301194)
Initalizing network drop monitor service
ata2.00: ATA-4: GBDriver RA6, ra6h.b00, max UDMA/33
ata2.00: 7864320 sectors, multi 0: LBA
ata2.00: configured for UDMA/33
scsi 1:0:0:0: Direct-Access ATA GBDriver RA6 ra6h PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 1:0:0:0: Attached scsi generic sg0 type 0
sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 448k freed
Write protecting the kernel text: 3572k
Write protecting the kernel read-only data: 1716k
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 145
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=04bb, idProduct=010a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: HDH-U
usb 1-1: Manufacturer: I-O DATA DEVICE,INC.
usb 1-1: SerialNumber: 00000006A212
usb 1-1: configuration #1 chosen from 1 choice
[drm] Initialized drm 1.1.0 20060810
usb 1-2: new high speed USB device using ehci_hcd and address 3
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm:intel_init_bios] *ERROR* VBT signature missing
[drm] failed to find VBIOS tables
usb 1-2: New USB device found, idVendor=0411, idProduct=00f9
usb 1-2: New USB device strings: Mfr=96, Product=76, SerialNumber=63
usb 1-2: Product: Mass Storage Device
usb 1-2: Manufacturer: USB2.0 External
usb 1-2: SerialNumber: DEF1105977F3
usb 1-2: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
fbcon: inteldrmfb (fb0) is primary device
[drm] DAC-6: set mode 800x600 b
Console: switching to colour frame buffer device 100x37
fb0: inteldrmfb frame buffer device
3
- 20 -
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=0461, idProduct=4d22
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: New USB device found, idVendor=413c, idProduct=2105
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Dell USB Keyboard
usb 3-2: Manufacturer: Dell
usb 3-2: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
generic-usb 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0
dracut: Scanning devices sda2 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_f12d4g" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "vg_f12d4g" now active
EXT4-fs (dm-0): barriers enabled
kjournald2 starting: pid 243, dev dm-0:8, commit interval 5 seconds
EXT4-fs (dm-0): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_f12d4g-lv_root
dracut: Loading SELinux policy
type=1404 audit(1268301197.751:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8192 avtab hash slots, 144734 rules.
SELinux: 8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
SELinux: 75 classes, 144734 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1268301198.598:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access I-O DATA HDH-U 1.09 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 234493056 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI disk
usb-storage: device scan complete
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX09 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
udev: starting version 145
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:01:00.0: setting latency timer to 64
e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM
0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:80:4c:a9:00:b8
0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25

Contec IPC-BX955D-DC 取扱説明書

タイプ
取扱説明書