2. Gigabyte
  3. GA-8I915G Pro
GA-8I915G Pro

Gigabyte GA-8I915G Pro インストールガイド

  • こんにちは！ GIGABYTE GA-8I875 Ultra マザーボードに搭載されたIT8212 IDE RAIDコントローラのユーザーマニュアルについて、ご質問にお答えします。このマニュアルではRAID設定、BIOS設定、Windows OSインストール方法などを解説していますので、お気軽にご質問ください。
  • BIOSでRAIDモードを有効にするにはどうすれば良いですか？
    RAIDアレイを作成するにはどうすれば良いですか？
    Windows XPインストール時にRAIDドライバをインストールするにはどうすれば良いですか？
    RAIDアレイの種類はどれを選べますか？
    RAIDアレイの再構築はどのように行いますか？
IT8212 .......................................................................................2
(1)IDE........................................................................................................................2
(2)BIOSIDE RAID.............................3
(3)RAID BIOSRAID...................................................................................5
(4)RAID............................................13
(5)IDE RAID...................................................15
ITE8212 IDE RAID - 2 -
Ác
Åé
¤¤
¤å
IT8212
(1) IDE
(2) BIOS IDE RAID
(3) RAID BIOS RAID
(4) RAID
(5) RAID
(a) ()IDE (IDE
RAID )
(b)
(c) Windows XP 2000
(d)
(1) IDE
IDE IDE IDE
GA-8I875 Ultra IT8212 IDE IDE3 IDE4
ITE 8212 IDE RAID- 3 -
1
(2)BIOSIDE RAID
BIOSIDE RAID
1BIOS POST (Power-On Self Test )<Del>
BIOSCMOS SETUPRAIDIntegrated Peripher-
alsOnboard H/W GIGARAIDEnabledGigaRAID Function
RAID (1)RAIDGigaRAID Function ATA
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE [Enabled]
On-Chip Secondary PCI IDE [Enabled]
On-Chip SATA [Auto]
xSATA Port0 Configure as SATA Port0
SATA Port1 Configure as SATA Port1
SATA RAID Function [Enabled]
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
AC97 Audio [Auto]
Onboard H/W SATA [Enabled]
Serial ATA Function [RAID]
Onboard H/W GIGARAID [Enabled]
GigaRAID Function [RAID]
Onboard H/W 1394 [Enabled]
Onboard H/W LAN [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Item Help
Menu Level }
If a hard disk
controller card is
used, set as Disabled
[Enabled]
Enabled onboard IDE
Port
[Disabled]
Disabled onboard IDE
Port
higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
ITE8212 IDE RAID- 4 -
Ác
Åé
¤¤
¤å
2Advanced BIOS Features Hard Disk Boot Priority
Microsoft Windows 2000/XP IDE 1. SCSI-0: IT8212
(2)
3
First Boot Device CD-ROMCD-ROM(3)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
}Hard Disk Boot Priority [Press Enter]
First Boot Device [CDROM]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Password Check [Setup]
Limit CPUID Max. to 3 [Enabled]
DRAM Data Integrity Mode Non-ECC
higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
Item Help
Menu Level }
4
BIOS
3
2
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Hard Disk Boot Priority
1. SCSI-0 : IT8212
2. Bootable Add-in Cards
hi: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
Item Help
Menu Level }}
Use <h> or <i> to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
ITE 8212 IDE RAID- 5 -
(3)RAID BIOSRAID
IDERAID BIOSRAID
BIOS POST (Power-On Self Test)
4<Ctrl>+<G> <F4>GigaRAID BIOS
4
5
GigaRAID Setup Utility5
: <1>~<5>
Auto Configuration [1]:
Define RAID [2]:
Delete RAID [3]:
Rebuild RAID[4]: (RAID 1RAID 0+1)
RAID Card Configuration [5]: RAID
GigaRAID BIOS V1.41 F/W Ver 02093030
Copyright 2002-2003 ITE, Inc. All Rights Reserved
Press wait for IDE scan...
Drive 0:Maxtor 6E030L0 IDE 0
Drive 1:Not Detected
Drive 3:Maxtor 6E030L0 IDE2
Drive 4:Not Detected
Press <Ctrl-G> to enter Setup Utility or
Press <ESC> or <S> to continue booting....
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
[1]..[5] Select [ESC] Exit
Auto Configuration.............................. [ 1 ]
Define RAID....................................... [ 2 ]
Delete RAID....................................... [ 3 ]
Rebuild RAID..................................... [ 4 ]
RAID Card Configuration................... [ 5 ]
[ Main Menu ] ]
ITE8212 IDE RAID- 6 -
Ác
Åé
¤¤
¤å
6
(Auto Configuration)
<1>6
Auto Configuration Menu: <Space>Setup Array Type as
RAID0RAID1 RAID0+1
JBOD Normal (ATA)6RAID 0
Array Configuration:
RAID<Ctrl>+<Y>
<Y>
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
[gf, Space] Change Option [CTRL-Y] Save [ESC] Exit
[ Auto Configuration Menu ]
]
Setup Array Type as: RAID0
RAID Mode.............................................................. Stripe
Un-used Drives........................................................ 0
Drive(s) in Array.................................................... 2
Array Capacity (size in MB)................................... 55791
[ Array Configuration ] ]
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
6
ITE 8212 IDE RAID- 7 -
(Define RAID): RAID 1/RAID 0+1
<2>7Array Number.
Array Number <Enter>Define RAID Sub-Menu (8)
* : Capacity (GB) : Bootable Array
[h] Up [i] Down [Space] Boot Array [Enter] Select [ESC] Exit
[ Define RAID Menu ]
Array No Array Mode Drive No Size(MB) Status
Array 0 ---- ---- ---- ----
Array 1 ---- ---- ---- ----
Array 2 ---- ---- ---- ----
Array 3 ---- ---- ---- ----
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
7
ITE8212 IDE RAID- 8 -
Ác
Åé
¤¤
¤å
(Define RAID Sub-Menu) (8):<Space>
- -
1. (Array Mode): Space
Span Stripe Mirror Stripe+MirrorStripe
2. (Block Size)Stripe Stripe+Mirror
1KB 2KB 4KB 8KB
16KB 32KB 64KB
3. (Assignment)RAID
Assignment<Space>Y Y
RAID Drive NoY
4. <Ctrl>+<Y>
5. <Y> <N>Sta-
tus Functional.
6. <Esc>Define RAID (9)
* : Capacity (GB)
[h] Up [i] Down [Space] Change Option [Ctrl-Y] Save [ESC] Exit
[ Define RAID Sub-Menu ]
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
[ Drive Assignments ]
Channel
ID Drive Name Size (MB) Assignment
Pri/D0 Maxtor 6E030L0 29324 N
Sec/D0 Maxtor 6E030L0 29324 N
Array No Array Mode Drive No Status
Array 0 Stripe 0 Non-functional
Block Size: 64KB
8
ITE 8212 IDE RAID- 9 -
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
* : Capacity (GB) : Bootable Array
[h] Up [i] Down [Space] Boot Array [Enter] Select [ESC] Exit
[ Define RAID Menu ]
Array No Array Mode Drive No Size(MB) Status
Array 0 Striped 2 55791 Functional
Array 1 ---- ---- ---- ----
Array 2 ---- ---- ---- ----
Array 3 ---- ---- ---- ----
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
9:
ITE8212 IDE RAID- 10 -
Ác
Åé
¤¤
¤å
(Delete RAID):
31 0 <Del>
10
* : Capacity (GB) : Bootable Array
[h] Up [i] Down [Del] Delete [ESC] Exit
[ Delete RAID Menu ]
Array No Array Mode Drive No Size(MB) Status
Array 0 Stripe 2 55791 Functional
Array 1 ---- ---- ---- ----
Array 2 ---- ---- ---- ----
Array 3 ---- ---- ---- ----
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
Channel
ID Drive Name Size (MB) Assignment
Pri/D0 Maxtor 6E030L0 29324 Y
Sec/D0 Maxtor 6E030L0 29324 Y
Array No Array Mode Drive No Status
Array 0 Stripe 2 Functional
Block Size: 64KB
* : Capacity (GB)
[ Delete RAID Sub-Menu ]
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
[ Drive Assignments ]
11 <Ctrl>
+<Y>"Erase the data in the array?"
<Y>
Are you sure you want to delete this array?
Press Ctrl-Y to Delete or other key to abort
11
ITE 8212 IDE RAID- 11 -
(Rebuild RAID):
RAID 1RAID 0+1<4>Rebuild RAID
(12)RAID 1RAID0+1
12
* : Capacity (GB) : Bootable Array
[h] Up [i] Down [Enter] Select [ESC] Exit
[ Rebuild RAID Menu ]
Array No Array Mode Drive No Size(MB) Status
Array 0 Mirror 2 29875 Functional
Array 1 ---- ---- ---- ----
Array 2 ---- ---- ---- ----
Array 3 ---- ---- ---- ----
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
<Enter>13 <Enter>
13
* : Capacity (GB) : Bootable Array
[h] Up [i] Down [Enter] Select [ESC] Exit
[ Source Drive ]
Channel ID Drive Name Size (MB)
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
[ Target Drive ]
Channel ID Drive Name Size (MB)
[ Drive List ]
Channel ID Drive Name Size (MB)
Pri/D0 Maxtor 6E030L0 27895
Sec/D0 Maxtor 6E030L0 27895
ITE8212 IDE RAID- 12 -
Ác
Åé
¤¤
¤å
* : Capacity (GB) : Bootable Array
[h] Up [i] Down [Enter] Select [ESC] Exit
[ Source Drive ]
Channel ID Drive Name Size (MB)
Pri/D0 Maxtor 6E030L0 27895
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
[ Target Drive ]
Channel ID Drive Name Size (MB)
Sec/D0 Maxtor 6E030L0 27895
[ Drive List ]
Channel ID Drive Name Size (MB)
Pri/D0 Maxtor 6E030L0 27895
Sec/D0 Maxtor 6E030L0 27895
Start to duplicate the image
Do you like to continue?
Y- Continue / ESC- Abort
Source DriveTarget Drive
<Y> (14)
("Do you like monitoring the reconstruction status till it completes?")<Y>
14
ITE 8212 IDE RAID- 13 -
RAID Card Configuration:
<5>15
RAID Card Configuration: Auto-Rebuild Enabled (Space
)GigaRAID Disabled
8Rebuild RAID
RAID Card Resource: GigaRAID I/O
Driver Status:
* : Capacity (GB) Drive Mode: P: PIO, D:DMA, U: UDMA
[gf, Space] Change Option [ESC] Exit
[ RAID Card Configuration ]
GigaRAID Setup Utility (C)Copyright 2002-2003 ITE, Inc.
Channel 0Interrupt: A I/P Port: 0008410
Channel 1Interrupt: A I/P Port: 0008C10
[ Drive Status]
Channel Size Drive
ID Drive Name (MB) Array No Mode
Pri/D0 Maxtor 6E030L0 27895 Array 0 U6
Sec/D0 Maxtor 6E030L0 27895 Array 0 U6
[ RAID Card Resource ]
Auto-Rebuild: Disabled
15
ITE8212 IDE RAID- 14 -
Ác
Åé
¤¤
¤å
11
(4)RAID
Microsoft Windows 2000/XP IDE RAID
IDE RAID
RAID
1
2(1 6 )
17
BootDrv
MENU.EXE(17)
16
ITE 8212 IDE RAID- 15 -
3
MENU.EXE MS-DOS(18)
19
18
4<2>(2)GIGARAID
GigaRAID
5(19)<0>GigaRAID
ITE8212 IDE RAID- 16 -
Ác
Åé
¤¤
¤å
20
Windows Setup
Press F6 if you need to install a 3rd party SCSI or RAID driver.
(5)IDE RAID
GigaRAIDBIOS
Microsoft Windows 2000 XP IDE(Microsoft Win-
dows XP )
1Microsoft Windows 2000 XP
Press F6 if you need to install a 3rd party SCSI or RAID driver
<F6>(20)<F6>
21 <F6>1
2GigaRAID<S>(21)
21
Windows Setup
S=Specify Additional Device ENTER=Continue F3=Exit
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s)
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
ITE 8212 IDE RAID- 17 -
3
22
GigaRAID
(22)
Windows XP "ITE IT8212 ATA
RAID Controller (Windows 2000/XP) ( 22)
4
<Enter> GigaRAID
23
ITE8212 IDE RAID- 18 -
Ác
Åé
¤¤
¤å
GigaRAID(24)
<ENTER>Microsoft Windows 2000 XP
24
WindowsXP Professional
Microsoft(R)
Windows (R) XP
Windows XP
Windows XP
indows XP
ENTER= R= F3=
/