* 5 1 0 0 0 4 4 6 6 3 - 0 1 *
Important Notes on Handling
Be careful of static electricity.
To prevent damage due to static electricity, before you touch the connector area of the unit, be careful of any
accumulated static charge. Before connecting or disconnecting external equipment, touch your hand to a metal
object to discharge static electricity.
Use a shielded LAN cable.
When making a connection to the HDBaseT connector, use a Cat 5e (Category 5e) or higher shielded LAN cable
(shielded twisted pair—STP). Connecting an unsuitable cable might result in a drop in signal quality or interrupted
video transmission. Also, using an unshielded LAN cable might cause the unit to malfunction due to accumulated
static charge in the cable.
Never use other than rated cables.
For HDMI cable, use only items certi ed to meet the HDMI standard. Connecting a nonstandard HDMI cable can result
in malfunction. Also, using a cable whose length exceeds the rating value might cause the unit to malfunction due to
buildup of static charge.
Be careful of cable orientation when inserting.
When connecting a cable, be sure to check the orientation of the connector. Forcing a connection with the wrong
orientation might damage the connector or the unit.
Copyright © 2014 ROLAND CORPORATION
-
1
-
2
