Philips HX9996/12 ユーザーマニュアル

カテゴリー
電動歯ブラシ
タイプ
ユーザーマニュアル

このマニュアルも適しています

9900 Prestige
1
4
5
6
7
9
10
2
3
13
14
8
1615
12
11
empty page before TOC
English 6
简体中文
27
繁體中文
50
English
6
English
Introduction
Congratulations on your new Philips Sonicare
power toothbrush! Superior plaque removal, whiter
teeth, and healthier gums are at your fingertips.
Using Sonicare’s combination of gentle sonic
technology and clinically developed and proven
features, you can be confident that you’re getting
the very best clean, every time.
Further support and product registration are
available to you at: www.philips.com/Prestige-
Get-Started
Welcome to the Philips Sonicare family!
Important safety information
Only use the product for its intended purpose.
Read this important information carefully before
you use the product and its batteries and
accessories, and save it for future reference.
Misuse can lead to hazards or serious injuries.
Warnings
- Keep the charger away from water.
- After cleaning, make sure the charger is
completely dry before you connect it to the wall
socket.
- This appliance can be used by children and
persons with reduced physical, sensory or
mental capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance
in a safe way and understand the hazards
involved. Cleaning and user maintenance shall
not be made by children without supervision.
- Children shall not play with the appliance.
7
English
- Only use original Philips accessories or
consumables. Only use the charger provided
with the product. If supplied, only use the
original USB cable and USB power supply unit.
- This appliance contains no user-serviceable
parts. If the appliance is damaged, stop using it
and contact the Consumer Care Center in your
country (see 'Warranty and support'). If the cord
is damaged, replace the charger with a new
one.
- Do not use the charger outdoors or near heated
surfaces.
- Do not clean any part of the product in the
dishwasher.
- This appliance has only been designed for
cleaning teeth, gums and tongue.
- Stop using the appliance and consult your
dentist/doctor if excessive bleeding occurs
after use, if bleeding continues to occur after 1
week of use or if you experience discomfort or
pain.
- If you have had oral or gum surgery in the
previous 2 months, consult your dentist before
you use this appliance.
- If you have a pacemaker or other implanted
device, contact your doctor or the manufacturer
of the implanted device prior to use.
- If you have medical concerns, consult your
doctor before you use this appliance.
- This appliance is a personal care device and is
not intended for use on multiple patients in a
dental practice or institution.
- Stop using a brush head with crushed or bent
bristles. Replace the brush head every 3 months
or sooner if signs of wear appear.
8
English
- If your toothpaste contains peroxide, baking
soda or bicarbonate (common in whitening
toothpastes), thoroughly clean the brush head
with soap and water after each use. This
prevents possible cracking of the plastic.
- Avoid direct contact with products that contain
essential oils or coconut oil. Contact may result
in bristles dislodging.
- To charge the battery, only use the USB wall
adapter, charging base and charging travel case
provided with the product: WAA1001, WAA2001,
HX9200 or HX9200/B, and TCC1001, TCC2001,
TCC3001, CBB1001 or CBB2001. Do not use an
extension cord.
- Charge, use and store the product at a
temperature between 0°C and 40°C.
- Keep product and batteries away from fire and
do not expose them to direct sunlight or high
temperatures.
- If the product becomes abnormally hot or
smelly, changes color or if charging takes longer
than usual, stop using and charging the product
and contact Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
- Do not open, modify, pierce, damage or
dismantle the product or battery to prevent
batteries from heating up or releasing toxic or
hazardous substances. Do not short-circuit,
overcharge or reverse charge batteries.
- If batteries are damaged or leaking, avoid
contact with the skin or eyes. If this occurs,
immediately rinse well with water and seek
medical care.
9
English
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Radio Equipment Directive
Hereby, Philips declares that electric tootbrushes
equipped with a radio frequency interface
(Bluetooth or BrushSync) are in compliance with
Directive 2014/53/EU.
- Bluetooth radio frequency: 2.4 GHz
- Maximum Bluetooth radio frequency power: 3
dBm
- NFC radio frequency: 13.56 MHz
- Maximum NFC radio frequency power: 30.16
dBm
The full text of the EU declaration of conformity is
available at the following internet address:
www.philips.com/support
Intended use
Sonicare Prestige power toothbrushes are
intended to remove adherent plaque and food
debris from the teeth to reduce tooth decay and
improve and maintain oral health. Prestige power
toothbrushes are intended for consumer home
use. Use by children should be supervised by an
adult.
Your Philips Sonicare
1 Hygienic travel cap
2 Premium All-in-One brush head (A3)
3 BrushSync symbol
4 Handle
5 Power on/off button
10
English
6 Intensity indicator and hidden button
7 SenseIQ indicator
8 Brush head replacement reminder indicator
9 Battery indicator
10 Brushing feedback light
11 Charging base
12 Charging stand
13 USB-A wall adapter
14 USB-C cord
15 Charging travel case
16 USB-C socket
Note: The content of the box may vary based on
the model purchased.
The following symbols may appear on the product:
Read Operator’s Manual.
Detachable Power Supply Part:The "xxxxxx"
indicates the model number of the approved
chargers to be used.
Sonicare App - Getting Started
The Sonicare app pairs with your toothbrush to
provide you a connected experience. By
connecting your toothbrush to your Sonicare app
account, you will be able to:
- Customize your Sonicare toothbrush settings
according to your preferred modes, intensity
and toothbrush feedback.
- Track your brushing progress.
11
English
- Receive personalized tips and actionable
recommendations to improve your oral health.
- Access the full range of benefits and receive
ongoing upgrades to your Prestige experience.
The app is compatible with a wide range of iPhone
and Android™ smartphones. More information is
available at www.philips.com/Prestige-Get-
Started
To start using the Sonicare app:
S7920
1 Download the Sonicare app to your phone.
2 Ensure your phone's Bluetooth is turned on.
3 Pick up your toothbrush to ensure it is active
(lights on).
4 Open the app and follow guided steps.
5 Pair your toothbrush with the app.
6 Create your account via the app. Complete
firmware update, if prompted, to access the
latest improvements and features.
7 Brush regularly. You are ready to start your
connected experience. When you regularly sync
the toothbrush with the app, you can receive
updates to help improve your oral healthcare.
8 Sync regularly.
- To sync manually: Pair/connect your
toothbrush with the app every couple of weeks
to benefit from the app features/capabilities.
- To sync automatically: Allow location
permission while setting up the app. By
allowing location permissions, your phone
knows when it is in the connection range of
your toothbrush and can refresh your brushing
data to the app to provide the latest insights
and recommendations
Note: Make sure your phone's Bluetooth is turned
on when using the app so that your toothbrush
12
English
can transfer and update your brushing data to the
app. If you have questions about why your
brushing data is collected, be sure to review the
Sonicare Privacy Statement, available throughout
the app setup process.
App - Features
The Sonicare App provides customizable settings
for your toothbrush according to your preference,
including:
- Intensity Settings
- Mode Controls
- Enable and disable Adaptive Intensity
- Enable and disable Scrubbing feedback
Brush Head
Your Sonicare Prestige power toothbrush comes
with the new "Premium All-in-One brush head"
(A3). This brush head is specifically designed to
provide exceptional plaque removal, whitening
(stain removal), and gum health benefits.
Premium All-in-One brush heads come with
BrushSync Technology (see description below) as
indicated by the symbol at the bottom of the
brush head.
To explore our full range of brush head options,
please visit our website for more information:
www.philips.com/toothbrush-heads
13
English
Using your Philips Sonicare
Brushing instructions
1 Push the brush head firmly onto the handle.
Note: It is normal to see a slight gap between
the brush head and the handle. This allows the
brush head to vibrate properly.
2 Wet the bristles and apply a small amount of
toothpaste.
45°
3 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees). Apply light
pressure to make the bristles reach the gumline
or slightly beneath the gumline.
Note: Keep the center of the brush head in
contact with the teeth at all times.
4 Press the power on/off button to turn on the
Philips Sonicare.
14
English
5 Apply light pressure to maximize Philips
Sonicare’s effectiveness and let the Philips
Sonicare toothbrush do the brushing for you.
Note: The bristles should slightly flare. Do not
scrub. A change in vibration from the handle
and the brushing feedback light flashes purple
to alert you when you apply too much pressure.
Gently move the brush head slowly across the
teeth in a small back and forth motion so the
longer bristles reach between your teeth.
Continue this motion throughout the brushing
cycle.
6 To clean the inside surfaces of the front teeth,
tilt the brush handle semi-upright and make
several vertical overlapping brushing strokes on
each tooth.
1
2
3
4
5
6
7 The BrushPacer divides the brushing time into
six equal segments and indicates when you
should move to the next area. Segments are
indicated with a brief pause in vibration. The
toothbrush automatically stops at the end of
the brushing session.
Note: Your Philips Sonicare toothbrush is safe to
use on braces, dental modifications and dental
restorations (fillings, crowns, veneers)
Brushing modes
Your power toothbrush comes pre-set to the all-
in-one clean mode that provides the dentist
recommended 2 minute brushing routine, with a
six segment brush pacer.
15
English
To personalize your brushing mode you can
customize your power toothbrush settings from
the Sonicare app (see 'Sonicare App - Getting
Started').
Note: Although a mode is not displayed on the
toothbrush handle, you can update the mode any
time from the Sonicare App and your selection will
be stored.
Intensity settings
Your power toothbrush comes with 3 different
intensity settings:
- High intensity (three lights)
- Medium intensity (two lights)
- Low intensity (one light)
×3
×1
×2
To manually select your desired intensity, press
the intensity indicator lights on the handle, to cycle
through the options. The intensity setting can be
changed before, during, or after brushing.
Note: The intensity setting can also be customized
from the Sonicare app.
BrushSync technology
BrushSync technology enables your brush head to
communicate with your handle using a microchip.
The symbol at the bottom of the brush head
indicates that the brush head is equipped with this
technology.
BrushSync technology enables:
- Brush head replacement reminder
- BrushSync mode paring (for Tongue Care brush
heads)
Features
- SenseIQ
16
English
- Pressure Sensor Feedback
- Adaptive Intensity
- Scrubbing Feedback
- BrushPacer
- Brush head replacement reminder
SenseIQ
Your Sonicare is equipped with SenseIQ
technology that is a combination of smart features
that observe your brushing behaviors (e.g. motions,
habits, brush head choice) and provide
personalized feedback and recommendations.
The SenseIQ features include:
- Adaptive Intensity
- Real time feedback:
-
Scrubbing Feedback
-
Pressure Sensor Feedback
- Personalized recommendations in the app
- Brushing behavior feedback in the app
The SenseIQ icon on the handle will illuminate
when the smart features are active:
- while brushing
- to confirm enabling and disabling of settings
Pressure Sensor Feedback
Your Sonicare toothbrush measures the pressure
you apply while brushing to protect your gums and
teeth from damage.
If you apply excess pressure, the handle will
change its vibration and the brushing feedback
light will flash (purple) at the bottom of the handle
until you reduce the pressure.
Note: The Pressure Sensor comes activated with
your product. To deactivate this feature, see
'Activating or deactivating features'.
17
English
Adaptive intensity
Your Sonicare toothbrush is designed with
Adaptive Intensity to protect your gums. If you
apply excess pressure for an extended period of
time, your toothbrush will automatically lower the
intensity setting 1 level. You will experience a brief
pause in the pressure feedback and feel the
intensity adjust to the next lower level.
Note: Adaptive Intensity comes activated with your
product. To deactivate this feature, see 'Activating
or deactivating features'.
Note: Every new brushing cycle the intensity will go
back to your pre-selected setting.
Scrubbing Feedback
Your Sonicare toothbrush measures the motions
while brushing to detect scrubbing behavior (see
brushing instructions for optimal technique). If you
regularly scrub while brushing, the app will
recommend that you enable Scrubbing Feedback.
When Scrubbing Feedback is activated the
brushing feedback light at the bottom of the
handle will illuminate amber and the handle will
change its vibration as a reminder to stop
scrubbing. The brushing feedback light will turn off
when you stop scrubbing.
Note: Scrubbing Feedback comes deactivated. To
activate this feature, see 'Activating or deactivating
features'.
18
English
BrushPacer
1
2
3
4
5
6
The BrushPacer divides the brushing time into six
equal segments and indicates when you should
move to the next area. Segments are indicated
with a brief pause in vibration. The toothbrush
automatically stops at the end of the brushing
session.
Note: Additional segments may be added when
you use White+ or Gum Health Modes. See
Sonicare app for mode descriptions.
Brush head replacement reminder
Your Sonicare toothbrush will track the wear of
your smart brush head, using the BrushSync
technology to measure:
- The overall pressure you apply while brushing
- The total time you have brushed with your
brush head
Once your brush head is no longer effective, the
brush head replacement reminder indicator light
will blink amber and the handle will make a series
of beeps and tones to indicate is time to replace
your brush head.
Note: The brush head replacement reminder
comes activated with your product. To deactivate
this feature, see 'Activating or deactivating
features'.
Activating or deactivating features
You can activate or deactivate the following
features of your toothbrush:
- Adaptive Intensity
- Pressure Sensor Feedback
- Scrubbing Feedback
- Brush head replacement reminder
19
English
Note: Adaptive Intensity will be deactivated when
pressure sensor is deactivated.
From app
The following features can be activated or
deactivated from the Sonicare app.
- Adaptive Intensity
- Scrubbing Feedback
For instruction for how to connect to the app (see
'Sonicare App - Getting Started').
From handle
Step 1: Place the handle on the charging stand.
Step 2: Press and hold power button for:
AdaptiveIinten
sity
Brush head
replacement
reminder
Pressure Sensor
Feedback
up to 3
seconds
Up to 5
seconds
Up to 7 seconds
¯ ¯ ¯
Step 3: Let go power button when you hear
1 beep 1 beep and
then 2 beeps
1 beep, 2 beeps and
then 3 beeps
¯ ¯ ¯
SenseIQ
indicator lights
up for 3
seconds
Brush head
replacement
reminder
indicator lights
up for 3
seconds
SenseIQ indicator and
light ring lights up
purple for 3 seconds
20
English
Together with:
If you see the battery indication blink white 3 times and
hear 3 tones from low to high, then the feature has
been activated.
OR
If you see battery indication blink amber 3 times and
hear 3 tones high to low, then the feature has been
deactivated.
Charging and battery status
Charging on charger base
1
2
1 Plug the USB cord of the charging base into the
USB wall adapter and plug the wall adapter into
an electrical outlet.
2 Place the charging stand (clear cover) on the
charging base.
3 Place the toothbrush handle on the charger.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70

Philips HX9996/12 ユーザーマニュアル

カテゴリー
電動歯ブラシ
タイプ
ユーザーマニュアル
このマニュアルも適しています

他の言語で