Philips HX9996/13 ユーザーマニュアル

9900 Prestige

1

4

5

6

7

9

10

2

3

13

14

8

1615

12

11

empty page before TOC

English 6

简体中文

27

繁體中文

50

English

6

English

Introduction

Congratulations on your new Philips Sonicare

power toothbrush! Superior plaque removal, whiter

teeth, and healthier gums are at your fingertips.

Using Sonicare’s combination of gentle sonic

technology and clinically developed and proven

features, you can be confident that you’re getting

the very best clean, every time.

Further support and product registration are

available to you at: www.philips.com/Prestige-

Get-Started

Welcome to the Philips Sonicare family!

Important safety information

Only use the product for its intended purpose.

Read this important information carefully before

you use the product and its batteries and

accessories, and save it for future reference.

Misuse can lead to hazards or serious injuries.

Warnings

- Keep the charger away from water.

- After cleaning, make sure the charger is

completely dry before you connect it to the wall

socket.

- This appliance can be used by children and

persons with reduced physical, sensory or

mental capabilities or lack of experience and

knowledge if they have been given supervision

or instruction concerning use of the appliance

in a safe way and understand the hazards

involved. Cleaning and user maintenance shall

not be made by children without supervision.

- Children shall not play with the appliance.

7

English

- Only use original Philips accessories or

consumables. Only use the charger provided

with the product. If supplied, only use the

original USB cable and USB power supply unit.

- This appliance contains no user-serviceable

parts. If the appliance is damaged, stop using it

and contact the Consumer Care Center in your

country (see 'Warranty and support'). If the cord

is damaged, replace the charger with a new

one.

- Do not use the charger outdoors or near heated

surfaces.

- Do not clean any part of the product in the

dishwasher.

- This appliance has only been designed for

cleaning teeth, gums and tongue.

- Stop using the appliance and consult your

dentist/doctor if excessive bleeding occurs

after use, if bleeding continues to occur after 1

week of use or if you experience discomfort or

pain.

- If you have had oral or gum surgery in the

previous 2 months, consult your dentist before

you use this appliance.

- If you have a pacemaker or other implanted

device, contact your doctor or the manufacturer

of the implanted device prior to use.

- If you have medical concerns, consult your

doctor before you use this appliance.

- This appliance is a personal care device and is

not intended for use on multiple patients in a

dental practice or institution.

- Stop using a brush head with crushed or bent

bristles. Replace the brush head every 3 months

or sooner if signs of wear appear.

8

English

- If your toothpaste contains peroxide, baking

soda or bicarbonate (common in whitening

toothpastes), thoroughly clean the brush head

with soap and water after each use. This

prevents possible cracking of the plastic.

- Avoid direct contact with products that contain

essential oils or coconut oil. Contact may result

in bristles dislodging.

- To charge the battery, only use the USB wall

adapter, charging base and charging travel case

provided with the product: WAA1001, WAA2001,

HX9200 or HX9200/B, and TCC1001, TCC2001,

TCC3001, CBB1001 or CBB2001. Do not use an

extension cord.

- Charge, use and store the product at a

temperature between 0°C and 40°C.

- Keep product and batteries away from fire and

do not expose them to direct sunlight or high

temperatures.

- If the product becomes abnormally hot or

smelly, changes color or if charging takes longer

than usual, stop using and charging the product

and contact Philips.

- Do not place products and their batteries in

microwave ovens or on induction cookers.

- Do not open, modify, pierce, damage or

dismantle the product or battery to prevent

batteries from heating up or releasing toxic or

hazardous substances. Do not short-circuit,

overcharge or reverse charge batteries.

- If batteries are damaged or leaking, avoid

contact with the skin or eyes. If this occurs,

immediately rinse well with water and seek

medical care.

9

English

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

Radio Equipment Directive

Hereby, Philips declares that electric tootbrushes

equipped with a radio frequency interface

(Bluetooth or BrushSync) are in compliance with

Directive 2014/53/EU.

- Bluetooth radio frequency: 2.4 GHz

- Maximum Bluetooth radio frequency power: 3

dBm

- NFC radio frequency: 13.56 MHz

- Maximum NFC radio frequency power: 30.16

dBm

The full text of the EU declaration of conformity is

available at the following internet address:

www.philips.com/support

Intended use

Sonicare Prestige power toothbrushes are

intended to remove adherent plaque and food

debris from the teeth to reduce tooth decay and

improve and maintain oral health. Prestige power

toothbrushes are intended for consumer home

use. Use by children should be supervised by an

adult.

Your Philips Sonicare

1 Hygienic travel cap

2 Premium All-in-One brush head (A3)

3 BrushSync symbol

4 Handle

5 Power on/off button

10

English

6 Intensity indicator and hidden button

7 SenseIQ indicator

8 Brush head replacement reminder indicator

9 Battery indicator

10 Brushing feedback light

11 Charging base

12 Charging stand

13 USB-A wall adapter

14 USB-C cord

15 Charging travel case

16 USB-C socket

Note: The content of the box may vary based on

the model purchased.

The following symbols may appear on the product:

Read Operator’s Manual.

Detachable Power Supply Part:The "xxxxxx"

indicates the model number of the approved

chargers to be used.

Sonicare App - Getting Started

The Sonicare app pairs with your toothbrush to

provide you a connected experience. By

connecting your toothbrush to your Sonicare app

account, you will be able to:

- Customize your Sonicare toothbrush settings

according to your preferred modes, intensity

and toothbrush feedback.

- Track your brushing progress.

11

English

- Receive personalized tips and actionable

recommendations to improve your oral health.

- Access the full range of benefits and receive

ongoing upgrades to your Prestige experience.

The app is compatible with a wide range of iPhone

and Android™ smartphones. More information is

available at www.philips.com/Prestige-Get-

Started

To start using the Sonicare app:

S7920

1 Download the Sonicare app to your phone.

2 Ensure your phone's Bluetooth is turned on.

3 Pick up your toothbrush to ensure it is active

(lights on).

4 Open the app and follow guided steps.

5 Pair your toothbrush with the app.

6 Create your account via the app. Complete

firmware update, if prompted, to access the

latest improvements and features.

7 Brush regularly. You are ready to start your

connected experience. When you regularly sync

the toothbrush with the app, you can receive

updates to help improve your oral healthcare.

8 Sync regularly.

- To sync manually: Pair/connect your

toothbrush with the app every couple of weeks

to benefit from the app features/capabilities.

- To sync automatically: Allow location

permission while setting up the app. By

allowing location permissions, your phone

knows when it is in the connection range of

your toothbrush and can refresh your brushing

data to the app to provide the latest insights

and recommendations

Note: Make sure your phone's Bluetooth is turned

on when using the app so that your toothbrush

12

English

can transfer and update your brushing data to the

app. If you have questions about why your

brushing data is collected, be sure to review the

Sonicare Privacy Statement, available throughout

the app setup process.

App - Features

The Sonicare App provides customizable settings

for your toothbrush according to your preference,

including:

- Intensity Settings

- Mode Controls

- Enable and disable Adaptive Intensity

- Enable and disable Scrubbing feedback

Brush Head

Your Sonicare Prestige power toothbrush comes

with the new "Premium All-in-One brush head"

(A3). This brush head is specifically designed to

provide exceptional plaque removal, whitening

(stain removal), and gum health benefits.

Premium All-in-One brush heads come with

BrushSync Technology (see description below) as

indicated by the symbol at the bottom of the

brush head.

To explore our full range of brush head options,

please visit our website for more information:

www.philips.com/toothbrush-heads

13

English

Using your Philips Sonicare

Brushing instructions

1 Push the brush head firmly onto the handle.

Note: It is normal to see a slight gap between

the brush head and the handle. This allows the

brush head to vibrate properly.

2 Wet the bristles and apply a small amount of

toothpaste.

45°

3 Place the toothbrush bristles against the teeth

at a slight angle (45 degrees). Apply light

pressure to make the bristles reach the gumline

or slightly beneath the gumline.

Note: Keep the center of the brush head in

contact with the teeth at all times.

4 Press the power on/off button to turn on the

Philips Sonicare.

14

English

5 Apply light pressure to maximize Philips

Sonicare’s effectiveness and let the Philips

Sonicare toothbrush do the brushing for you.

Note: The bristles should slightly flare. Do not

scrub. A change in vibration from the handle

and the brushing feedback light flashes purple

to alert you when you apply too much pressure.

Gently move the brush head slowly across the

teeth in a small back and forth motion so the

longer bristles reach between your teeth.

Continue this motion throughout the brushing

cycle.

6 To clean the inside surfaces of the front teeth,

tilt the brush handle semi-upright and make

several vertical overlapping brushing strokes on

each tooth.

1

2

3

4

5

6

7 The BrushPacer divides the brushing time into

six equal segments and indicates when you

should move to the next area. Segments are

indicated with a brief pause in vibration. The

toothbrush automatically stops at the end of

the brushing session.

Note: Your Philips Sonicare toothbrush is safe to

use on braces, dental modifications and dental

restorations (fillings, crowns, veneers)

Brushing modes

Your power toothbrush comes pre-set to the all-

in-one clean mode that provides the dentist

recommended 2 minute brushing routine, with a

six segment brush pacer.

15

English

To personalize your brushing mode you can

customize your power toothbrush settings from

the Sonicare app (see 'Sonicare App - Getting

Started').

Note: Although a mode is not displayed on the

toothbrush handle, you can update the mode any

time from the Sonicare App and your selection will

be stored.

Intensity settings

Your power toothbrush comes with 3 different

intensity settings:

- High intensity (three lights)

- Medium intensity (two lights)

- Low intensity (one light)

×3

×1

×2

To manually select your desired intensity, press

the intensity indicator lights on the handle, to cycle

through the options. The intensity setting can be

changed before, during, or after brushing.

Note: The intensity setting can also be customized

from the Sonicare app.

BrushSync technology

BrushSync technology enables your brush head to

communicate with your handle using a microchip.

The symbol at the bottom of the brush head

indicates that the brush head is equipped with this

technology.

BrushSync technology enables:

- Brush head replacement reminder

- BrushSync mode paring (for Tongue Care brush

heads)

Features

- SenseIQ

16

English

- Pressure Sensor Feedback

- Adaptive Intensity

- Scrubbing Feedback

- BrushPacer

- Brush head replacement reminder

SenseIQ

Your Sonicare is equipped with SenseIQ

technology that is a combination of smart features

that observe your brushing behaviors (e.g. motions,

habits, brush head choice) and provide

personalized feedback and recommendations.

The SenseIQ features include:

- Adaptive Intensity

- Real time feedback:

-

Scrubbing Feedback

-

Pressure Sensor Feedback

- Personalized recommendations in the app

- Brushing behavior feedback in the app

The SenseIQ icon on the handle will illuminate

when the smart features are active:

- while brushing

- to confirm enabling and disabling of settings

Pressure Sensor Feedback

Your Sonicare toothbrush measures the pressure

you apply while brushing to protect your gums and

teeth from damage.

If you apply excess pressure, the handle will

change its vibration and the brushing feedback

light will flash (purple) at the bottom of the handle

until you reduce the pressure.

Note: The Pressure Sensor comes activated with

your product. To deactivate this feature, see

'Activating or deactivating features'.

17

English

Adaptive intensity

Your Sonicare toothbrush is designed with

Adaptive Intensity to protect your gums. If you

apply excess pressure for an extended period of

time, your toothbrush will automatically lower the

intensity setting 1 level. You will experience a brief

pause in the pressure feedback and feel the

intensity adjust to the next lower level.

Note: Adaptive Intensity comes activated with your

product. To deactivate this feature, see 'Activating

or deactivating features'.

Note: Every new brushing cycle the intensity will go

back to your pre-selected setting.

Scrubbing Feedback

Your Sonicare toothbrush measures the motions

while brushing to detect scrubbing behavior (see

brushing instructions for optimal technique). If you

regularly scrub while brushing, the app will

recommend that you enable Scrubbing Feedback.

When Scrubbing Feedback is activated the

brushing feedback light at the bottom of the

handle will illuminate amber and the handle will

change its vibration as a reminder to stop

scrubbing. The brushing feedback light will turn off

when you stop scrubbing.

Note: Scrubbing Feedback comes deactivated. To

activate this feature, see 'Activating or deactivating

features'.

18

English

BrushPacer

1

2

3

4

5

6

The BrushPacer divides the brushing time into six

equal segments and indicates when you should

move to the next area. Segments are indicated

with a brief pause in vibration. The toothbrush

automatically stops at the end of the brushing

session.

Note: Additional segments may be added when

you use White+ or Gum Health Modes. See

Sonicare app for mode descriptions.

Brush head replacement reminder

Your Sonicare toothbrush will track the wear of

your smart brush head, using the BrushSync

technology to measure:

- The overall pressure you apply while brushing

- The total time you have brushed with your

brush head

Once your brush head is no longer effective, the

brush head replacement reminder indicator light

will blink amber and the handle will make a series

of beeps and tones to indicate is time to replace

your brush head.

Note: The brush head replacement reminder

comes activated with your product. To deactivate

this feature, see 'Activating or deactivating

features'.

Activating or deactivating features

You can activate or deactivate the following

features of your toothbrush:

- Adaptive Intensity

- Pressure Sensor Feedback

- Scrubbing Feedback

- Brush head replacement reminder

19

English

Note: Adaptive Intensity will be deactivated when

pressure sensor is deactivated.

From app

The following features can be activated or

deactivated from the Sonicare app.

- Adaptive Intensity

- Scrubbing Feedback

For instruction for how to connect to the app (see

'Sonicare App - Getting Started').

From handle

Step 1: Place the handle on the charging stand.

Step 2: Press and hold power button for:

AdaptiveIinten

sity

Brush head

replacement

reminder

Pressure Sensor

Feedback

up to 3

seconds

Up to 5

seconds

Up to 7 seconds

¯ ¯ ¯

Step 3: Let go power button when you hear

1 beep 1 beep and

then 2 beeps

1 beep, 2 beeps and

then 3 beeps

¯ ¯ ¯

SenseIQ

indicator lights

up for 3

seconds

Brush head

replacement

reminder

indicator lights

up for 3

seconds

SenseIQ indicator and

light ring lights up

purple for 3 seconds

20

English

Together with:

If you see the battery indication blink white 3 times and

hear 3 tones from low to high, then the feature has

been activated.

OR

If you see battery indication blink amber 3 times and

hear 3 tones high to low, then the feature has been

deactivated.

Charging and battery status

Charging on charger base

1

2

1 Plug the USB cord of the charging base into the

USB wall adapter and plug the wall adapter into

an electrical outlet.

2 Place the charging stand (clear cover) on the

charging base.

3 Place the toothbrush handle on the charger.

ページが読み込まれています...

Philips HX9996/13 ユーザーマニュアル

このマニュアルも適しています

Philips HX9996/13 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント