Skmei Skimi B25 Smart Watch ユーザーマニュアル
- カテゴリー
- アクティビティトラッカー
- タイプ
- ユーザーマニュアル
表扣
手环主体区域
将取出的手环主机直接插USB接口
充电器充电即可。
USB 充电接口
插入USB接口充电
使用说明书
B25
U s e r m a n u e l
正确佩戴方式
充电方式 手环操作
连接设备
APP功能及设定
手环显示说明
消息提醒
基本参数
部件介绍
在手机上安装手环APP
如何开/关机
1. 手环以尺骨茎突后佩戴最佳
初次使用确保手环电量正常,若低电不能正常开机,请连接充电器对
设备进行充电,手环会自动开机。
2. 根据调节孔调好适合手腕的大小，扣上腕带扣；
1. 在设备关机状态下,长按触摸键4秒以上可使设备震动并开机；
1. 设备开机状态下，短按触摸键可点亮屏幕;
1、打 开 APP第一次打开会提示用户打开需 要开启的权限，请全 部同意 ,同时
打开手 机蓝牙功能;
与手机同步后 手环会自动校准时间,主界面长按4S,
可以更换不同主界面；
主界面
佩戴手环 记录每天 运动步数 ，可查看当前实时步数；
根据行走步数 估算运动里程；
计步
根据行走步数 估算消耗的卡路里 ；
显示手环蓝牙地址和手环软件版本信息;
卡路里
心率
寻找手机
关于手环
信息
血压 血氧
2、点击手机APP屏幕右下角“我的 ”菜单图标出现菜单功能列表 ,点击我的
设备进行手动连接“B25”。
3、连接成功后,APP会自动保存手环蓝牙地址,APP打 开 或 在 后 台 运 行 ，都 会
自动搜索并连接手环;
4、安卓手机请确保在安装时或手机系统设置中赋予 APP后台运行和读取联系
人信息等所有权限。
进入APP后请先设定个人信息；我的→个人资料，可设置性别-年龄-身高-体重；
我的→目标设置：可以设置您的每日计步、卡路里、里程目标数，监控每日的
完成情况；
2. 手环默认时钟页面,短按触摸键可切换查看不同页面,
无操作默认8秒息屏；
3. 切换到心率和血压界面自动开始测试，测试结束大概40S
左右息屏。
2. 在设备开机状态下, 进入关机界面“ ”长按触摸键4秒以上
可使设备震动并关机。
3. 传感器要紧贴皮肤，避免移动。
正确拆卸方式
1、扫描下图二维码下载“RaceFit Pro ”APP即可，并注册账号。
(APP兼容蓝牙4.0、安卓4.0、IOS10.3以上系统的智能手机）
2、长按手环触摸按键5秒开机后，打开手机蓝牙，第一次进入
“RaceFit Pro”,将自动引导您绑定手环。
RaceFit Pro
主界面 计步 卡路里
闹钟 开关机睡眠
心率 血压
血氧
里程
里程
相机 找手机
个人 资 料
目标设置
切换 到 心 率 、血 压 、血 氧 界 面 后 会 自 动 测 试 ，等 待 数 秒 后 显 示 当 前心率、
血压、血氧的测试结果。为了保证测试数据准确，进入测量模式后，请保
持测量时 放松、静止，测量时也请不要说话。
连接状态下，如果开启了来电提醒功能，当来电时,手环上会震动，
并显示来电的姓名或号码。（需赋予APP读取通讯录权限）
长按查找手机界面4秒进入查找手机，查找时显示动态图标，蓝牙连接
状态下，被连接的手机响起提示音；
此界面长按4秒以上可以查看最近推送的信息内容;
开关机
此界面长按触摸键4秒以上可使设备震动并关机。
久坐提醒
智能闹钟
来电提醒
连接状态下，如果开启了短信提醒功能，当有短信时手环上会震动并显示
短信内容。
短信提醒
连接状态下，如果开启了此功能，则当有微信、QQ,Facebook 等消息 时，
手环会震动提醒并显示内容。（ 需 赋 予 APP获取 系 统 通 知 的 权 限）
设置是否开启久坐提醒功能 您可在个人资料中设置提醒时间间隔若
在设定时间内长时间坐着则手环会提醒。
注意: 佩戴手环入睡才会有睡眠数据,且在第二天9点以后才会同步到
APP中。（数据仅供参考，不可用于医疗用途 ）
连接状态下 可进行5个闹钟的设置，设 置后会同步 给手环 ;支持离线
闹钟 在同步成功后 即使APP未 连接 手环也会按设定时间提醒。
手环显示设置
您可在此选项中设置手环端功能按键切换的画面 打开的页面会在按下
功能按键后依次切换 而关闭的功能则不会在切换中出现。
系统要求：An driod 4.4及以上、IOS 8.0及以上版本且支持蓝牙4.0以
上的手机
摇一摇拍照
连接状态下 APP进入“摇一摇拍照”界面,摇一摇手环 倒计时3秒后
自动拍照，请允许APP访问相册以保存自拍的照片。
睡眠模式
入睡时 手环会自动进入睡眠监测模式 自动检测您整晚深睡/浅睡/清醒
次数,计算您的睡眠质量，睡眠数据暂时只支持APP端查看。
使用提醒功能时需要设置为允许"RaceFit Pro "后台 运行， 建议在权限管
理中添加"RaceFit Pro " 为 信 任 ( 主 要 是 在 省 电 管 理 ，受 保 护 应 用 ，白 名 单
里面对"RaceFit Pro "进行设置),并打开所有权限。
其他提醒
Android用户温馨提示:
设 备 类 型 ： 智 能 手 环 电池类型： 锂聚合物80mAh
振 动 马 达 ： 支 持
主 机 / 腕 带 / 包 装 盒 / 说 明 书
注意事项
1.洗澡和游泳时不宜佩戴；
2.同步数据时请链接手环；
3.不要把手环长时间暴露在水分较高、温度极高或极低的地方；
4.充电要求：使用规格为5V 0.5-2A的充电器充电，长期不使用时，
同步方式：蓝牙4.0
传感器：光电式心率传感器工作温度：-10℃~50℃
防 水 等 级 ： I P 6 7 显示屏： IPS彩色高清
请务必关机并保证每2个月补充电1次
右手拇指按住触摸屏处 两只手如图握住手环，左手
食指往上用力顶，左边的屏
幕会翘起来。
屏幕被顶出，就可以直接把
机身拿出来。
1
2
3
触摸键
2.Adjust the adjustment hole which suit for your wrist,
fasten the buckle；
3.Switch to the heart rate and blood pressure page,it will start test
automatically,when it finished screen off after 40S；
1. Device on,press the touch button to light up the screen ;
Personal information
Set personal information when you login: My data-personal
data, gender-age-height-weight.
Call remind
Target setting
My data-Target setting,Also can set daily sport andsleeping
target, Monitor daily completion Please set time for sedentary
reminder, or you can turn it off in the message alert.
Other remind
Sedentary reminder
About the bracelet
Power On & Off
* Host * Wrist strap * Charging cable ** Packing box and manual*
Shake and take picture
BRACELET DISPLAY INSTRUCTION
Device Requirement: above IOS 8.0/Android 4.4,above Bluetooth 4.0
Sleep mode
Android user Tips:
Message remind
Main interface
Information view
Search mobile
Buckle
Bracelet main body area
USB charge port
Enter the bracelet host
to USB port charger
(computer \ power bank)
can be charge directly
Insert USB port to charge
CORRECT WEARING METHOD
CHARGE WAY
BRACELET OPERATION
DOWNLOAD APP ON MOBILE PHONE
APP FUNCTION AND SETTING
MESSAGE REMIND
SPECIFICATION
COMPONENT INTRODUCTION
TIPS
TURN ON/OFF
CORRECT DISASSEMBLY
1.Wear it after the ulnar styloid is best;
1.When device off,press the touch button for more than 4s,
device will vibrate and turn on；
2.When device on, find the shutdown interface" "then press the touch
button for more than 4s,device will vibrate and turn off. touch button to
switch different pages,without operation 3s screen off;
3.Sensor should be close to the skin to avoid moving.
CONNECTING DEVICE
RaceFit Pro
Device type:Smart bracelet
Battery type :Li-polymer 80mAh
Vibrate motor:support
Sync way:Bluetooth 4.0
Work temperature:-10℃~50℃
Waterproof: IP67 Screen：IPS high-definition colorful
Sensor: a photoelectric heart
rate sentor
Make sure that the battery have power in first time use.If less power to
turned on,please connect the charger tocharge the device,the bracelet
will turn on automatically.
2. Acquiescence clock is the first page,press the touch button to switch different
pages, without operation 8s screen off ;
3. Switch to the heart rate and blood pressure page, it will starttest
automatically,when it finished screen off after 40s.
Scan a QR code to download APP"RaceFit Pro" and create your
account. (APP support to Bluetooth 4.0, Android 4.4, IOS 10.3 smart
phone systerms)
Long press 5 seconds to turn on the device, open the Bluetooth of the
phone, and enter the "Day Health " APP for the first time, which will
automatically guide you to bind the bracelet.
The first time you open the APP will prompt the user required open
permissions, please agree all and turn on the Bluetooth function of
mobile phone.
Click the “My” menu icon in the lower right corner of the cell phone app
to display the menu function list, click on my device to manually
connect to"B25".
After the connection is successful, the APP will automatically save the
Bluetooth address of the bracelet, and if the APP is opened or running in
the background, it will automatically search and connect the bracelet;
For Android phones, please make sure to set the APP permissions during
installation or on the phone system setting to give the APP all permissions
to run in the background and read contact information.
After sync with phone,bracelet will adjust the time automatically,Press
the main interface for 4 seconds, different main interfaces can be
replaced.
Keep connected,if this function is enabled,the bracelet will vibrate when
there is a message ,such as WeChat, QQ.Facebook.etc.(You need to give the
APP permission to get system notifications)
In this option，you can set the screen for the switch of the bracelet function
button. The opened page will be switched after pressing the function button,
and the closed function will not appear in the switch.
Set turn on/off sedentary reminder function.You can set the
reminder interval in the profile.If you sit for a long time in the
set time.the bracelet will remind you.
Press and hold the touch button for more than 4 seconds to make the
device vibrate and shut down.
Keep connected,enter the shaking photo interface,shake
the bracelet,take a photo automatically after 3 seconds of
4. Charging requirements: Charge the charger with the
specification of 5V 0.2-2A. If it is not used for a long time,
please turn it off and ensure that it is recharged every two months.
3. Do not expose the handle ring to a place with high moisture,
high temperature or very low temperature for a long time;
2. Please connect the bracelet when synchronizing data;
1. Not suitable for bathing and swimming;
When you fall asleep, the bracelet will enter the sleep monitoring
mode automatically; detect your Awake/Light sleep / Deep sleep,
calculate your sleep quality;sleep data only supports APP
side view.
Note: Sleep data will only be available when you wear the bracelet
to sleep, and will be synced to the app after 9:00am the next day.
When using the reminder function,you need to set it to allow "RaceFit Pro " to
run in the background;recommended to add "RaceFit Pro" to the rights
management and turn on all permissions
At this interface and press it for 4 seconds to start searching
mobile;in Bluetooth connection,the connected mobile will
give out prompt sounds;
counting down. Please allow the
APP to access the album to save the self-portrait photos.
Smart alarm clock
5 alarms can be set when connected and configured, it will be
synchronized to the bracelet. Support offline alarm clock. After the
successful configuration, it will remind you on time even if the app is not
connected to the bracelet.
Press the interface for 4seconds, You can see the content of the
recently received information.
Keep connected, if the SMS reminder function is enabled,
the bracelet will vibrate when message come in.
Keep connected, if the call alert function is enabled,the wristband will
vibrate and display the name or number of the caller when the callcome
in. (You need to give APP read address book permission)
1
Press the touch screen
with the right thumb
Hold the bracelet with both
hands as shown in the picture.
The index finger on the left hand
push it up, and the screen on the
left will tilt up
When the screen is pushed
out, you can take the body out
directly.
2 3
1、
2、
1、
2、
3、
4、
Touch key
It will automatically test when switching to heart rate,blood pressure or blood
oxygen, waiting for a few seconds, the current heart rate, blood pressure,
or blood oxygen test results will be displayed. When entering the measurement
mode, please keep relaxed and still, and do not speak to ensure the accuracy of
the test data.
Pedometer
Wear the bracelet to record the number of daily movement steps, you can
view the real-time steps.
Main
interface
Pedometer Calorie
Alarm clock Turn off/onSleep
Heart rate
Heart
rate
Blood
pressure
Blood
pressure
Blood
oxygen
Blood
oxygen
Camera
Find the
phone
Mileage
Estimate the mileage based on the number of steps
Display Bluetooth address and software version information.
Bracelet display settings
Distance
Calorie
Estimate the calories burned based on the number of steps
-
1
-
2
