Dell 17FP ユーザーマニュアル

www.dell.com | support.dell.com

Dell™ PowerEdge™ Rack Console 17FP

Flat-Panel Monitor

User’s Guide

Guide Utilisateur du Moniteur à Ecran Plat

Flachbildschirm-Monitor - Bedienungsanleitung

フラットパネルモニタユーザーズガイド

Guía del usuario del monitor de pantalla plana

平板顯示器用戶指南

平面顯示器使用手冊

LCD 모니터 사용 설명서

Instrukcja Obsługi Monitora Płaskoekranowego

Руководство

пользователя монитора с плоским экраном

17FPugfc_00.fm Page 1 Wednesday, August 29, 2007 5:18 PM

17FPugfc_00.fm Page 2 Wednesday, August 29, 2007 5:18 PM

www.dell.com | support.dell.com

Dell™ PowerEdge™ Rack Console 17FP

Flat-Panel Monitor

User’s Guide

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are

not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either

trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and

names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model 17FP

December 2009 P/N MNPG9 Rev. A00

Contents 3

Contents

CAUTION: Safety Instructions . . . . . . . . . . . . . . . . . . 1-1

Rack Mounting of Systems. . . . . . . . . . . . . . . . 1-1

Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Overview. . . . . . . . . . . . . . . . . . . . . . . 1-2

Features . . . . . . . . . . . . . . . . . . . . . . . 1-2

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Power Management Modes . . . . . . . . . . . . . . . 1-7

Flat-Panel Monitor Front and Back View . . . . . . . . . . . . . 1-8

Setting Up the Flat-Panel Monitor. . . . . . . . . . . . . 1-9

Power Management System . . . . . . . . . . . . . . . 1-9

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Adjusting the Monitor Display . . . . . . . . . . . . . . . . . 1-10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

Issue: Display is unclear or unstable.. . . . . . . . . . . 1-15

Issue: There is no display on the flat-panel monitor. . . . . . 1-15

Issue: "Input Signal Out of Range" message in the OSD. . . . 1-15

Issue: "No Signal" message in the OSD. . . . . . . . . . 1-15

4 Contents

User’s Guide 1-1

CAUTION: Safety Instructions

Use the following safety guidelines to help ensure your own personal safety and to help

protect your system from potential damage. For complete safety information, see the safety

documentation that came with your system.

IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS:

Dell products are not medical devices and are not listed under UL or IEC 60601 (or

equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that

directly or indirectly contacts a patient.

Rack Mounting of Systems

Observe the following precautions for rack stability and safety. Also refer to the rack

installation documentation accompanying the system and the rack for specific warning and/or

caution statements and procedures.

Systems are considered to be components in a rack. Thus, "component" refers to any system

as well as to various peripherals or supporting hardware.

CAUTION: Installing systems in a rack without the front and side stabilizers

installed could cause the rack to tip over, potentially resulting in bodily injury

under certain circumstances. Therefore, always install the stabilizers before

installing components in the rack.

After installing system/components in a rack, never pull more than one

component out of the rack on its mounting rails at one time. The weight of more

than one extended component could cause the rack to tip over and may result in

serious injury.

NOTE:

Your system is safety-certified as a component for use in a rack cabinet using the

customer rack kit when both the rack cabinet and rack kit were designed for your

system. The installation of your system and rack kit in any other rack cabinet has not

been approved by any safety agencies. It is your responsibility to have the final

combination of system and rack kit in a cabinet evaluated for suitability by a certified

safety agency. The manufacturer disclaims all warranties and liability in connection with

such combinations.

• System rack kits are intended to be installed in a rack by trained service technicians. If

you install the kit in any other rack, be sure that the rack meets the specifications.

CAUTION: Do not move racks by yourself. Due to the height and weight of the

rack, a minimum of two people should accomplish this task.

www.dell.com | support.dell.com

1-2 User’s Guide

Instruction

Overview

This product outlines the specifications for the 17-inch, high-resolution color flat-panel

monitor. This flat-panel monitor is designed from the latest flat-panel monitor technology and

provides a performance oriented product with no radiation. This product uses a D-Sub 15-pin

VGA connector and can support 28 VESA modes, VESA DPMS power management, and plug

and play function. It is also a space saving design which conserves rack space compared to a

traditional CRT monitor. In addition, the flat-panel monitor consumes less power.

Features

This product has the following features:

• Before working on the rack, make sure that the stabilizers are secured to the rack,

extended to the floor, and that the full weight of the rack rests on the floor. Install front

and side stabilizers on a single rack or front stabilizers for joined multiple racks before

working on the rack.

• Always load the rack from the bottom up, and load the heaviest item in the rack first.

• Make sure that the rack is level and stable before extending a component from the rack.

• Do not overload the AC supply branch circuit that provides power to the rack. The total

rack load should not exceed 80 percent of the branch circuit rating.Check the voltage

rating before you connect the equipment to the power source to ensure that the required

voltage and frequency match the available power source.

• Do not use equipment power cables if the power cable is damaged. Use only with 40W

of power supply (Liteon PA-1041 series)

• Ensure that proper airflow is provided to components in the rack.

• Do not step on or stand on any component when servicing other components in a rack.

• For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the

equipment and shall be easily accessible.

Table 1-1. Features

Feature Description

Optimal resolution and refresh 1280 x 1024 at 60 Hz

CAUTION: Safety Instructions

(continued)

User’s Guide 1-3

Specifications

Table 1-2. Specifications

Screen type Active Matrix Thin Film Transistor (TFT)

Liquid Crystal Display (LCD)

Display active area 337.9 mm x 270.3 mm (13.3 inches x 10.64 inches)

Physical size

(width x depth x height)

358.5 mm x 17.5 mm x 296.5 mm

(14.1 inches x 0.689 inches x 11.67 inches )

Weight (LCD Panel only) 2.0 kg (4.41 lbs)

General

Model number 17FP

Flat Panel

Screen type Active matrix-TFT LCD

Screen dimensions 17-inch diagonal viewable image size

Preset display area:

Horizontal

Ver ti ca l

337.9 mm ± 0.5 mm

270.3 mm ± 0.5 mm

Viewing angle:

Horizontal

Ver ti ca l

+80 / –80 degree

+80 / –80 degrees

Pixel dot pitch 0.264 mm

Luminance output 250 cd/m

2

typical

200 cd/m

2

min

Contrast ratio 800:1 typical

550:1 min

Faceplate coating Anti-glare

Backlight CCFL <2> edge light system

Table 1-1. Features

(continued)

Feature Description

www.dell.com | support.dell.com

1-4 User’s Guide

Resolution

Horizontal scan range 30 KHz to 80 KHz

Vertical scan range 56 Hz to 75 Hz

Optimal preset resolution 1280 x 1024 at 60 Hz

Highest preset resolution 1280 x 1024 at 75 Hz

Supported Timing

TIMING NAME FH(KHz)

FV(Hz)

SYNC

POLARITY

TOTAL

(DOT/LINE)

ACTIVE

(DOT/LINE)

SYNC

WIDTH

(DOT/LINE)

FRONT

PORCH

(DOT/LINE)

BACK

PORCH

(DOT/LINE)

PIXEL

FREQ (MHz)

640x350 31.469 + 800 640 96 16 48 25.175

VGA-350 70.087 - 449 350 2 37 60

640x350 31.469 + 800 640 96 16 48 25.175

VGA-350 70.087 - 449 350 2 37 60

640x400 31.469 - 800 640 96 16 48 25.175

VGA-GRAPH 70.087 + 449 400 2 12 35

640x480 31.469 - 800 640 96 16 48 25.175

VGA-480 59.94 - 525 480 2 10 33

640x480 35 - 864 640 64 64 96 30.24

APPLE MAC-480 66.67 - 525 480 3 3 39

640x480 37.861 - 832 640 40 16 120 31.5

VESA-480-72Hz 72.809 - 520 480 3 1 20

640x480 37.5 - 840 640 64 16 120 31.5

VESA-480-75Hz 75 - 500 480 3 1 16

720x350 31.47 + 900 720 108 18 54 28.322

70Hz 70.087 - 449 400 2 37 60

720x400 31.469 - 900 720 108 18 54 28.322

VESA-400-TEXT 70.087 + 449 400 2 12 35

832x624 49.725 - 1152 832 64 32 224 57.2832

APPLE MAC-800 74.55 - 667 624 3 1 39

User’s Guide 1-5

800x600 35.156 + 1024 800 72 24 128 36

SVGA 56.25 + 625 600 2 1 22

800x600 37.879 + 1056 800 128 40 88 40

VESA-600-60Hz 60.317 + 628 600 4 1 23

800x600 48.077 + 1040 800 120 56 64 50

VESA-600-72Hz 72.188 + 666 600 6 37 23

800x600 46.875 + 1056 800 80 16 160 49.5

VESA-600-75Hz 75 + 625 600 3 1 21

1024x768 48.363 - 1344 1024 136 24 160 65

XGA 60.004 - 806 768 6 3 29

1024x768 53.964 + 1328 1024 176 16 112 71.664

COMPAQ-XGA 66.132 + 816 768 4 8 36

1024x768 56.476 - 1328 1024 136 24 144 75

VESA-768-70Hz 70.069 - 806 768 6 3 29

1024x768 60.023 + 1312 1024 96 16 176 78.75

VESA-768-75Hz 75.029 + 800 768 3 1 28

1024x768 60.24 - 1328 1024 96 32 176 80

APPLE MAC-768 75.02 - 803 768 3 3 29

1152x864 54.054 + 1480 1152 96 40 192 80

(60Hz) 59.27 + 912 864 3 13 32

1152x864 63.851 + 1480 1152 96 32 200 94.499

(70Hz) 70.012 + 912 864 3 1 44

1152x864 67.5 + 1600 1152 128 64 256 108

(75Hz) 75. + 900 864 2 2 32

1152x870 68.68 - 1456 1152 128 32 144 100

(75Hz) 75.06 - 915 870 3 3 39

Supported Timing

TIMING NAME FH(KHz)

FV(Hz)

SYNC

POLARITY

TOTAL

(DOT/LINE)

ACTIVE

(DOT/LINE)

SYNC

WIDTH

(DOT/LINE)

FRONT

PORCH

(DOT/LINE)

BACK

PORCH

(DOT/LINE)

PIXEL

FREQ (MHz)

www.dell.com | support.dell.com

1-6 User’s Guide

1280x960 60 + 1800 1280 112 96 312 108

(60Hz) 60 + 1000 960 3 1 36

1280x960 70 + 1800 1280 112 96 312 126

(70Hz) 70 + 1000 960 3 1 36

1280x960 75 + 1800 1280 112 96 312 135

(75Hz) 75 + 1000 960 3 1 36

1280x1024 64 + 1688 1280 112 48 248 108

VESA-1024-60Hz 60

+

1066 1024 3 1 38

1280x1024 80 + 1688 1280 144 16 248 135

VESA-1024-75Hz 75 + 1066 1024 3 1 38

NOTE: Mode 640 x 350, 70 Hz is not full screen.

Environmental

Temperature:

Operating

Nonoperating

5° to 35° C (50° to 95° F)

–20° to 60° C (–4° to 113° F) for 240 hours

Humidity:

Operating

Nonoperating

20% to 80% (noncondensing)

5% to 80% (noncondensing)

Altitude:

Operating

Nonoperating

3,000 m (10,000 ft)

12,192 m (40,000 ft)

Thermal dissipation:

Maximum

Typical

71.7 BTU/hour

51.2 BTU/hour

Supported Timing

TIMING NAME FH(KHz)

FV(Hz)

SYNC

POLARITY

TOTAL

(DOT/LINE)

ACTIVE

(DOT/LINE)

SYNC

WIDTH

(DOT/LINE)

FRONT

PORCH

(DOT/LINE)

BACK

PORCH

(DOT/LINE)

PIXEL

FREQ (MHz)

User’s Guide 1-7

Power Management Modes

If you have a VESA DPMS compliant display card or software installed in your system, the monitor can

automatically reduce its power consumption when not in use. If input from the keyboard, mouse, or other

input devices is detected, the monitor will automatically "wake up." Table 1-3 shows the power

consumption and signals for this automatic power saving feature.

Figure 1-1. Pin Assignment

Table 1-3. Power Management Modes

VESA Mode Video H-sync V-sync Power Used

(W)

Power Saving

(%)

LED Color

On Active Yes Yes Maximum 20W 0% Full bright < blue >

Sleep mode Blanked No Yes <0.5 W >75% Half bright < blue >

Sleep mode Blanked Yes No <0.5 W >75% Half bright < blue >

Active-off Blanked No No <0.5 W >75% Half bright < blue >

DC power off <0.5 W >85% Dark

Table 1-4. Signal Connector (15 pin D-sub Connector)

Pin No Signal

1Red Video

2Green Video

3Blue Video

4NC

5 Logic Ground

1

5

6

10

11

15

www.dell.com | support.dell.com

1-8 User’s Guide

Flat-Panel Monitor Front and Back View

Figure 1-2. Front View

6 Red Video Ground

7 Green Video Ground

8 Blue Video Ground

9VCC

10 Identify VGA Cable Connection

11 NC

12 SDA (DDC1/2B)

13 Horizontal Sync

14 Vertical Sync

15 SCL (DDC2B)

Table 1-4. Signal Connector (15 pin D-sub Connector)

(continued)

Pin No Signal

User’s Guide 1-9

Figure 1-3. Back View

Setting Up the Flat-Panel Monitor

Follow the steps below to set up the flat-panel monitor.

• If the monitor has not yet been operated, ensure the flat-panel monitor has been connected to an AC

power source. See the Rack Installation Guide.

• Pull the flat-panel monitor tray out until it locks. Grasp the monitor by its handle and rotate it to

approximately a 90 degree angle.

• Press the power button to turn on the monitor. See Figure 1-4 and Table 1-5.

• To adjust the monitor height, grasp the monitor at both sides and use equal pressure on both sides to

move it up and down.

Power Management System

This flat-panel monitor complies with the VESA DPMS (version 11) power management standard. The

VESA DPMS proposal provides four phases of power saving modes by detecting horizontal or vertical

sync signal. See Table 1-3 for information about power consumption for each different power

management mode.

The LED indicator color will be half-bright when the monitor is in power saving mode.

www.dell.com | support.dell.com

1-10 User’s Guide

Maintenance

CAUTION: To avoid risk of electric shock, do not disassemble the monitor

cabinet. Users cannot service the monitor. User maintenance is restricted to

cleaning.

CAUTION: Before cleaning the monitor, unplug it from the electrical outlet.

• To clean your flat-panel monitor screen, use a soft, clean cloth lightly dampened with water or

isopropyl alcohol.

• To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent.

• Wipe off stubborn stains from the cabinet with a cloth lightly dampened in isopropyl alcohol. Do

not use benzene, thinner, ammonia, or abrasive cleaners.

Adjusting the Monitor Display

The flat-panel monitor features an intuitive, menu-driven, On-Screen Display (OSD) that makes the

display characteristics adjustment quick and simple.

This model has four control keys located below the monitor screen. To access the OSD main menu, press

the function buttons and the OSD main menu diagram will appear as shown in Figure 1-5. Use the

function buttons to scroll through the menu. Use the adjustment buttons to make

changes to the selected menu items.

Current input resolution and vertical scanning frequency (FV) are displayed at the bottom of the OSD

menu along with firmware version number. Continuing to press the function buttons will scroll through

the entire menu.

Detailed descriptions of each function in the OSD menu is provided below.

CAUTION: The version number shown on the OSD menu in this guide is for illustration purposes

only. The firmware version for your monitor may have been updated to a later one.

User’s Guide 1-11

Figure 1-4. Controls

Table 1-5. Control Panel (Monitor Front Panel)

Control Description

1 Power LED will be full bright (blue) when monitor is on and will be half bright (blue) when in

power saving mode.

2 Function select counter-clockwise.

3 Function select clockwise.

4 Adjust increase.

5 Adjust decrease. (Auto Adjustment is enabled by pressing this button for 1 second.)

Table 1-6. OSD Layout

OSD format 20 characters by 9 rows

OSD border Cyan color

OSD tunable item Black foreground, Cyan background

Selected item Magenta foreground, Yellow background

Comment Magenta foreground, Blue background

www.dell.com | support.dell.com

1-12 User’s Guide

Figure 1-5. On Screen Display

Table 1-7. OSD Description

Function Icon Description

Brightness 101 brightness settings are available (0 to 100).

Contrast 101 contrast settings are available (0 to 100).

H. Position This function lets you adjust the display's horizontal

position

V. Position This function lets you adjust the display's vertical

position.

OSD Transparency This function lets you set the transparency of the OSD

menu. The transparency can be adjusted from 0 to 100.

11 scales are available.

Phase A total of 101 scales (0 to 100) are available to adjust

focus and clarity of the display.

Clock This function carries a frequency-tracking feature that

provide a stable and clarity environment. 101 settings

(from 0 to 100) are available on the mode that is currently

running. The adjustment ranges are variable in different

modes. This function records deviated number of clock

cycle between input timing and supported timing. The

clock value may not be "0" after Auto Adjustment when

the input timing is different from supported timing.

Color Temperature Push the ( ) buttons to select a different color

temperature.

OSD H. Position This function moves OSD menu horizontally.

User’s Guide 1-13

OSD V. Position This function moves OSD menu vertically.

Graph / Text Because the H and V-Frequencies of both 640 x 400@70

Hz and 720 x 400@70 Hz are the same, this function

allows you to manually select either 640 x 400 (graphics

mode) or 720 x 400 (text mode).

Recall The recall function will reset all adjusted parameters to

factory preset values.

Language Five OSD languages are available: English, German,

French, Spanish, and Japanese. Press ( ) or ( )

adjustment button to select the desired language.

Auto Adjustment Press ( ) button to activate the Auto Adjustment

function.

The Auto Adjustment function allows you to adjust the

display size, clock, and phase to obtain a optimize viewing

setting. This process will take 3 ~ 5 seconds to activate.

NOTE: After Auto Adjustment, the display might display

the wrong position or size if it has received a pattern

which has no screen border.

Exit Saves the values of this setting and exits the OSD menu

function.

Sharpness

Adjust the scale-up effect (smoother or sharper).

1280 x 1024 Current mode resolution.

60.2 HZ Current mode vertical frequency ±1 Hz.

VER 0.02MTGK0 Firmware version.

Intellectual-Auto The Auto Adjustment function starts automatically when a

display mode is input for the first time. After adjustment,

this mode is saved. The monitor switches to the optimized

condition automatically whenever this mode is

encountered again. A total of 21 recently used modes are

recorded into this system.

VESA DPMS

Functionality

When signaled by the host system, the monitor displays a

black screen for about 3 seconds. After 3 seconds, if the

monitor receives no further signal, it will display "No

Signal" and then enter the power saving mode.

Function Icon Description

www.dell.com | support.dell.com

1-14 User’s Guide

Table 1-8. LED Indicators

Mode LED color

On Full bright < blue >

Stand-by Half bright < blue >

Suspend Half bright < blue >

Off Dark

Button power off Dark

Cable disconnection 1. Half bright < blue > <Sleep mode>

2. Dark <DC power off; Off mode>

ページが読み込まれています...

Dell 17FP ユーザーマニュアル

このマニュアルも適しています

Dell 17FP ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント