Moneual MonCaso 972 取扱説明書

MonCaso 972 series

Product Guide

ENGLISH

Please read this manual carefully before system installations.

2 ENGLISH

MonCaso 972 series product guide

Manual Rev: 2.0

Release Date: November. 2008

No parts of this manual, including the products and software describe in it, may be reproduced,

transmitted, transcribed, and stored in retrieval system, or translated into any language in any

form or by any means, except documentation kept by the purchaser for backup purpose, without

the express written permission of Moneual Lab (Moneual).

Product warranty or service will not extended if: (1) the product is repaired, modified or altered,

unless such repair, modification or alteration is authorized in writing by Moneual; or (2) the serial

number of the product is defaced or missing.

Moneual provides this manual "as is" without warranty of any kind, either express or implied,

including but not limited to the implied warranties or conditions of merchantability or fitness for a

particular purpose. In no event shall Moneual, its directors, officers, employees or agents be liable

for any indirect, special, incidental, or consequential damages (including damages for loss of

profits, loss of business, loss of use or data, interruption of business and the like), even if Moneual

has been advised of the possibility of such damages arising from any defect or error in this

manual or product.

Specifications and information contained in this manual are furnished for informational use only,

and are subject to change at any time without notice, and should not be construed as a

commitment by Moneual. Moneual assumes no responsibility or liability for any errors or

inaccuracies that may appear in this manual, including the products and software described in it.

Products and corporate names appearing in this manual may or may not be registered trademarks

or copyrights of their respective companies, and are used only for identification or explanation and

to the owners' benefit, without intent to infringe.

Revision History

Revision

Date

V1.0

January. 2008

V1.1e

V2.0

July. 2008

Novemver.2008

ENGLISH 3

Contents

Safety information .......................................................................................................... 5

Drawing of Dismantlement ............................................................................................. 6

Package Contents .......................................................................................................... 7

Specification of Product .................................................................................................. 8

Chapter 1. Introduction ................................................................................... 9

1-1. Introduction ........................................................................................................... 10

1-2. Front panel ............................................................................................................ 10

1-3. Rear panel ............................................................................................................. 12

Chapter 2. Installation Guide ....................................................................... 13

2-1. Before You Begin .................................................................................................. 14

2-2. Opening the Case ................................................................................................. 15

2-3. Installing HDD ....................................................................................................... 16

2-4. Installing ODD ....................................................................................................... 17

2-5. Installing Motherboard ........................................................................................... 18

2-6. Installing Power Supply Unit .................................................................................. 19

2-7. Cable Connection .................................................................................................. 20

2-8. Power S.W and LED Connection .......................................................................... 20

2-9. iMON LCD Connection .......................................................................................... 21

2-10. Front I/O& Card Reader Connection ................................................................... 22

2-11. RGB Terminal Connection .................................................................................. 23

2-12. Attaching ODD Bezel .......................................................................................... 24

2-13. Installing the wireless keyboard .......................................................................... 25

Chapter 3. PAD Remote Control Software Installation ........................... 27

3-1. Software Installation .............................................................................................. 28

Service Notice...............................................................................................29

4 ENGLISH

ENGLISH 5

▪ Safety information

Electrical safety

1. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

2. When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected.

3. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service

technician or your retailer.

Operation safety

1. Before installing devices into the system, carefully read all the documentation that

came with the package.

2. Before using the product, make sure all cables are correctly connected and the power

cables are not damaged. If you detect any damage, contact your dealer immediately.

3. To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

4. Avoid dust, humidity, and temperature extremes. Don not place the product in any area

where it may become wet. Place the product on a stable surface.

5. If you encounter technical problems with the product, contact a qualified service

technician or your retailer.

Moneual Inc is not responsible for any damages due to external causes, including but not

limited to, improper use, problems with electrical power, accident, neglect, alteration, repair,

improper installation, or improper testing.

Disclaimer

6 ENGLISH

▪ Drawing of Dismantlement

Figures... Drawing of Dismanglement

Tables...Drawing of Dismanglement

1.Front Panel

2.Side

3.Base Plate

4.Rear Plate

5.Top Cover

6.HDD Cage

7.ODD Cage

8.PSU Guide

9.Hand Screw (#6-32)

10.Door

11.Punching Metal

12.Slot Guide-S

13.Audio Foot

14.DVD Bezel

15.Power Button

16.Vol.Knob

17.10Key button

18.Card Reader Cover

19.Card Reader

20.Rear FAN

21.HDD FAN(Optional)

22.PCI Bracket

23.LCD Cover

24.LCD Frame

25.7"Touch LCD

ENGLISH 7

▪ Package Contents

Check your MonCaso 972 series package for the following items. If any of the below items is

damaged or missing, contact your retailer immediately.

Case Accessories

Item

Q'ty

Hand Screw (#6-32*5)

2

Screw driver

1

Support Screw (M3*5*3L)

2

Washer Head Screws (M3*5L)

20

HDD Screw (#6-32*5L)

8

ODD Bezel

1

Stylus Pen

1

User's Guide

1

iMON 7"LCD

Item

Q'ty

iMON Remote Control (PAD Type)

1

iMON Power Cable(20pin-24pin)

1

AAA batteries for Pad Remote Control

1set

Driver CD

1

Wireless Keyboard (optional)

Item

Q'ty

Wireless keyboard

1

USB receiver

1

USB extend cable

1

AAA battery

1set

Keyboard driver CD

1

(Wireless Keyboard is optional component)

The specifications and package contents of product may change without prior notice to improve

performance.

8 ENGLISH

▪ Specification of Product

Specifications

Case Type

Desktop

Dimensions

460(L) x 435(W) x 160(H) mm

Weight

7kg (15.43 lb)

Material

Aluminum

Form Factor

Standard ATX / micro ATX

Power Supply

Standard ATX

PCI/AGP Size

Full Size

5.25" Bays

1 x 5.25" External Drive Bay

3.25 Bays

4 x 3.5" Internal Drive Bays

Expansion Slots

7 Slots

FAN Slots

4 Slots (HDD Cage: 2x80mm / Rear Plate: 2x80mm)

FAN Included

Rear Plate: 2 x 80mm*25T FAN

Front I/O Ports

1 x USB Ports, 1 x IEEE1394 (Firewire) Port, 1 x Microphone, 1 x

Headphones

Case Colors

Silver / Black

Card Reader

(7 in 1)

Compatible cards : CF(I/II), Micro Drive, SmartMedia, MultiMedia,

SecureDigital and Memory stick.

Compatible OS : Microsoft windows 98/ME/2000/XP

Host interface : USB 2.0 ports

Power Supply : DC 5V +/-5%, through USB port

7" Touch LCD

Screen Size : 7" Wide LCD

Screen Ratio : 15:9

Maximum Resolution : 1024 x 768

Screen Output : D-Sub

Power Input : 12V DC

Touch Screen

ENGLISH 9

Chapter 1

Introduction

This chapter gives a general description of

the MonCaso series.

The chapter lists the system features

including introduction on the front panel,

rear panels, and internal components.

10 ENGLISH

1-1. Introduction

Thank you for choosing the MonCaso series Home Theater PC Case.

The MonCaso 972 series will make you experience a perfect multimedia world.

The MonCaso 972 series is designed to be fully compatible with the world’s best hardware

components and provides quiet computing environment with its patented airflow structure

and cooling system.

Its refined exterior design with full premium aluminum chassis and built-in 7” LCD touch

screen display matching up with your other AV system arrangements will greatly contribute

to the overall impression of your living room.

Especially, universal wireless remote control unit that comes with the case will give you

more convenient control wherever you are at home.

MonCaso 972 series will deliver the leading edge technology for your computing and

multimedia entertainment needs.

1-2. Front panel

1. System power button: Press this button to turn the system on.

2. IR receiver: This receives signals from the MonCaso PAD remote control.

3. Microphone port: This port connects microphone.

4. Headphone port: This port connects a headphone with a stereo mini-plug.

ENGLISH 11

5. 6-pin IEEE 1394 port: The IEEE 1394 high-speed serial bus complements USB

by providing enhanced PC connectivity for a wide range of devices, including

audio/video (A/V) appliances, storage peripherals, other PCs and portable devices.

6. USB 2.0 port: This Universal Serial Bus 2.0 (USB 2.0) port is available for

connecting USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and

others.

7. LCD touch screen: This is a 7” LCD touch screen.

NOTE

Dual display graphics card should be used for LCD touch screen.

8. ODD bezel: This bezel is to be attached to ODD tray. Refer on page 28 about how

to install bezel on ODD tray.

9. ODD tray eject button: Press this button to eject the optical drive tray.

10. Control buttons

- Direct button (MCE): This allows to go to the application program directly. It

can be user-defined.

- App.Exit button: This quits the application program. It works same as

"ALT+F4"

- Back space button: This is used to go backward on MCE or iMEDIAN.

- Direction button: This is arrow key to move up/down/left/right.

- Start button: This is same as the windows icon key on the keyboard.

- Menu button: This is same as the menu button of the MonCaso PAD remote

controller.

11. Volume control/mute button: This is used for volume up and down/pressing for

mute.

12. Power LED: This LED lights up when you place a storage card in any of the card

slots, and turn off when you remove the card.

13. Card slot activity (W/R) LED: This LED flashes when data is being read from or

written to a storage card inserted any of the storage card slots.

14. Memory Stick/Memory Stick Pro card slot: This slot is for a Memory

Stick/Memory Stick Pro storage card.

15. Secure Digital/Multimedia Card slot: This slot is for a Secure Digital/Multimedia

Card storage card.

16. Compact Flash /Microdrive card slot: This slot is for a Compact Flash

/Microdrive storage card.

17. Smart Media card slot: This slot is for a Smart Media storage card.

12 ENGLISH

1-3. Rear panel

1. Space for power supply

2. Thumbscrew: These thumbscrews secure the top cover to the chassis.

3. Motherboard I/O shield hole:

Space for I/O port from motherboard

4. Air vent:

Space for air flow-out. It causes system failure if you block this air vent.

5. PCI bracket:

Remove bracket gently when you install graphics card or PC peripherals.

6. RGB terminal:

This cable is connected to the RGB port of the graphics card. This is used for

LCD touch screen display.

NOTE

Dual display graphics card should be used for LCD touch screen.

ENGLISH 13

Chapter 2.

Installation Guide

This chapter provides step-by-step instruction on

how to install components in the case.

14 ENGLISH

2-1. Before You Begin

Installation Precautions

When you install and test the MonCaso 972 series system, observe all warnings and

cautions in the installation instructions.

To avoid injury, be careful of:

 Sharp pins on connectors

 Sharp pins on printed circuit assemblies

 Rough edges and sharp corners on the chassis

 Hot components (like processors, voltage regulators, and heat sinks)

 Damage to wires that could cause a short circuits

Observe all warnings and cautions that instruct you to refer computer servicing to qualified

technical personal.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure

that the calculated total current loads of all the modules within the computer is less than the

output current rating of each of the power supplies output circuits.

Observe Safety and Regulatory Requirements

Read and adhere the instructions in this section and the instructions supplied with the

chassis and associated modules. If you do not follow these instructions and the instruction

provided by the chassis and module suppliers, you increase safety risk and the possibility of

noncompliance with regional laws and regulations. If the instructions for the chassis are

inconsistent with the instructions for associated modules, contact the supplier’s technical

support to find out how you can ensure that your computer meets safety and regulatory

requirements.

ENGLISH 15

2-2. Opening the Case

CAUTION

Do not remove the two bolts on the top cover near the front of the case.

Step1. Remove the Hand screw(#6-32) at the back of the top cover.

Step2. Slide back and lift top cover to open.

STEP1.

HAND SCREW (#6-32)

STEP2.

16 ENGLISH

2-3. Installing HDD

Step1. Using the Included screwdriver, remove all the screws indicated in the figure STEP1. and

removed the HDD bracket.

Step2. Secure the HDD disks to the HDD bracket as shown in figure STEP2.

NOTE.

The HDD FAN (80mm*25T) is an optional part and may not be included in your case.

STEP1.

STEP2.

ENGLISH 17

2-4. Installing ODD

Step1. Using the included screw driver, remove all the screws indicated in the figure STEP1. and

remove the ODD bracket.

Step2. Secure the ODD drive within the ODD bracket.

NOTE.

The 972 Case's ODD Drive is attached very close to the Main Board and may cause

problems if it is too big. Make sure to check specs before purchasing an ODD drive.

STEP1.

STEP2.

Tip. ODD Bezel Removal

 You can manually open the ODD by using a clip to

press a small button inside the hole in the front.

 The bezel can be removed by lifting up by the bottom.

CAUTION

The use of force may cause damages.

If your ODD does not instantly and easily

remove itself, please contact the ODD

manufacterer.

CAUTION

It is not possible to install ODD that

the depth is over 170mm. Be sure to

check the ODD specification before

purchasing ODD.

18 ENGLISH

2-5. Installing Motherboard

Refering to the figure below, use the Washer Head Screws (M3*5L) to secure the Motherboard

after determining the right stand off spaces according to the Form Factor chart below.

Form Factor

Mounting hole locations

Key, mounting holes

microATX ●

ATX ○

ATX

A, E, I, C, G, J, D, H, K

micro-ATX

B, C, D, F, G, H, J, K

NOTE.

The ATX is the default Form Factor for the 972 Case.

Support screw(M3*5*3L)

CAUTION

 The ATX is the default Form Factor for the 972.

To use a mATX make sure to insert Support

Screw(M3*5*3L) into B,F before using.

 To eliminated the chance of short circuiting

after exchanging to ATX from a mATX, make

sure to remove all Support Screws (M3*5*3L).

ENGLISH 19

2-6. Installing Power Supply Unit

Step1. Remove the PSU Guide before attaching the Power Supply.

Step2. After positioning the Power Supply so the Fan is facing the case's Side Vent Hole, use

Screw(#6*32) to attach to the case.

Attach the PSU Guide after Installing the Power Supply to protect the Power Supply from

external impact.

The flow of air

initiated by the

Side Vent Hole

PSU Guide

STEP1.

STEP2.

20 ENGLISH

2-7. Cable Connection

Figure... Front Panel Inside View

Table... Front Panel Inside View

A. S.W B/D

B. Front I/O B/D

C. Card Reader

D. 7" LCD Module

E. 10key B/D

F. Vol. Knob B/D

G. IR Receiver

2-8. Power S.W and LED Connection

1. Connect the S.W B/D's Power S.W cable to the iMON LCD's Power In 2Pin.

2. Connect the iMON LCD's Power out 2Pin cable to the front port of the motherboard with the

Power S.W pin.

3. Connect the S.W B/D's LED cable with the MotherBoard's front port LED Pin.

* Refer to the manual that came with the MotherBoard for more information on the front ports.

* Make sure that all connections are made in the correct direction.

Motherboard LED Port

2Pin or 3Pin

Motherboard Power

Port

ページが読み込まれています...

Moneual MonCaso 972 取扱説明書

このマニュアルも適しています

Moneual MonCaso 972 取扱説明書

他の言語で

関連論文

その他のドキュメント