ページを読み込んでいます...
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declare s that the product
Product Name:
Model Number:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Jun. 13, 2000
Eric Lu
GA-6OMM7E
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-6OMM7E
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Rex Lin
(Stamp) Date: Jun. 13, 2000 Name : Rex Lin
6OMM7E
Socket 370
Socket 370
REV.1.0 Second Edition
R-10-02-000725C
:
1)
2)
3)
4)
5)
6) BIOS BIOS
7)
P.1
P.2
P.3
6OMM7E P.5
CPU / P.6
P.30
P.31
Suspend to RAM ( ) P.32
P.38
BIOS P.39
P.73
6OMM7E
1
1.0 6OMM7E Jul.2000
1.0 6OMM7E Jul.2000
2000 7 25
3
þ 6OMM7E
þ
þ (IUCD)
þ 6OMM7E
6OMM7E
3
Ÿ ATX 24.6 x 21.2
CPU Ÿ Socket 370
Intel Pentium!!! 100/133MHz FSB, FC-PGA
Intel CeleronTM 66MHz FSB, FC-PGA
Ÿ 2nd CPU
Ÿ Intel 815 HOST / AGP / SDRAM Controller
Ÿ 82801BA I/O Controller Hub (ICH2)
Ÿ ICS 9250-25
Ÿ 66/100/133 MHz system bus speeds
Ÿ 3 168-pin DIMM
Ÿ PC-100 / PC-133 SDRAM VCM SDRAM
Ÿ 512MB
Ÿ 3.3V SDRAM DIMM
I/O Ÿ IT8712
Ÿ 1 AGP 4X mode AGP 2.0 compliant
Ÿ 3 PCI 33MHz & PCI 2.2 compliant
Ÿ 1 CNR (Communication and Networking Riser)
IDE Ÿ 2 IDE bus master (DMA 33/ ATA 66) IDE
4 ATAPI
Ÿ PIO mode 3, 4, (UDMA33/ATA66/100) IDE
ATAPI
CD-ROM
Ÿ 1
(360K ,720K ,1.2M ,1.44M 2.88M bytes)
Ÿ 1 SPP/EPP/ECP
Ÿ 2 (COM A & COM B)
Ÿ 4 USB
Ÿ 1 ( )
Ÿ 1 ( IR/CIR )
Ÿ CPU/ /
Ÿ CPU/ /
Ÿ
Ÿ CPU
Ÿ AC’97 CODEC
Ÿ Line In/Line Out/Mic In/AUX In/CD In/TEL/Game Port …
4
BIOS Ÿ AWARD BIOS, 4M bit
PS/2 Ÿ PS/2 PS/2
Ÿ (Wake-on-LAN)
Ÿ /
Ÿ 3
Ÿ
6OMM7E
5
6OMM7E
6OMM7E
BAT1
COM B
PCI2
PCI3
ICH2
Game & Audio
VGA COM A
LPT
PS/2
DIMM2
DIMM1
AGP
PCI1
PGA 370
CPU
USB
ATX Power
Floppy
IDE2
IDE1
FWH
BZ1
FW82815
LED1
DIMM3
DFP/TV
AC’97
JP1 JP3
JP5
J1
JP6
J2
JP4
JP7
J5
J6
J7
JP10
JP11
J10
JP12
J11
JP14
J14
JP21
JP20
J13
JP24
JP22
J12
JP15
JP18
JP23
JP26
IT8712
JP31
JP13
JP30
JP2
LAN
CNR
JP32
JP34
JP33
6OMM7E
6
$ CPU /
CPU P.8
P.9
P.9
COM A / COM B / / LPT P.9
CN2 (USB )[Back] P.10
USB & LAN (USB&LAN )[LAN ] P.10
PS/2 PS/2 P.11
J1 (CPU ) P.11
J2 ( ) P.12
J14 ( ) P.12
ATX P.13
JP13 (IR/CIR) [ / ] P.13
Floppy ( ) P.14
IDE 1 / IDE 2 P.14
J13 (Ring Power On) ( ) P.15
J12 (Wake On LAN) ( ) P.15
J7 (TEL) ( ) P.16
J6 (AUX_IN ) P.16
J5 ( ) P.17
JP7 (STR & LED1: DIMM LED) [ ] P.17
JP32 (USB )(Front) P.18
J10 ( SMBUS ) P.18
CN8 ( /) [DFP/TV Out ] P.19
P.20
J11 (2x11 Pins ) P.20
JP18 ( CMOS ) P.21
JP30 (PB ) P.21
JP15 ( ) P.22
JP22 ( ) P.22
JP4 (STR ) [ ] P.23
JP3 (PS/2 ) P.23
JP1 ( USB ) P.24
JP20 (BIOS ) P.24
6OMM7E
7
JP21 (Top Block Lock ) P.25
JP5 (CPU ) P.25
JP6 (DIMM ) P.26
JP12 ( ) [ ] P.26
JP14 ( ) P.27
JP23 (PCI/AGP 3VAUX) P.27
JP24 (CNR ) [ ] P.28
JP2 (Cyrix CPU ) [ ] P.28
JP34 (Onboard LAN ) [ ] P.29
JP31 (Front USB Keyboard Wake Up) P.29
CPU
8
CPU
JP10/JP11 JP26( 1) , 66MHz, 100MHz
133MHz Auto. CPU BIOS
M
CPU
JP10/JP11/JP26: CPU ( )
CPU SDRAM JP10 JP11 JP26
Auto Auto 1-2 1-2 1-2
66 100 2-3 2-3 1-2
100 100 2-3 Open 1-2
133 133 Open 2-3 1-2
133 100 Open Open 2-3
JP26
1
JP11
1
JP10
1
CPU SDRAM
66 100
100 100
133 133
:
1
Ö CPU 133 MHz, BIOS SDRAM SPD , Memory
.
M JP10,JP11 JP26 , BIOS . 3
, 66MHz, 100MHz, 133MHz Auto .
MCPU CPU ,
, , , ;CPU, ,
, .
6OMM7E
9
MIC In
Game
Port
Line In
Line Out
COM A / COM B / / LPT
COM A
LPT PORT
VGA
COM B
10
9
2
1
10
CN2: USB (Back)
5
6
7 8
4 3 2 1
1 USB V0
2 USB D0-
3 USB D0+
4
5 USB V1
6 USB D1-
7 USB D1+
8
USB & LAN : USB LAN (LAN )
1 – Green LED
(LAN Link LED)
2 – Yellow LED
(LAN Active LED)
2
1
5 6 7
8
1
2 3
4
1 USB V0
2 USB D0-
3 USB D0+
4
5 USB V1
6 USB D1-
7 USB D1+
8
6OMM7E
11
PS/2 PS/2
PS/2
1
2
3
4 VCC(+5V)
5
6
PS/2
PS/2
1
2
3
4
5
6
J1: CPU
1
1
2 +12V
3
/