Dell PowerVault NX1950 ユーザーガイド

www.dell.com | support.dell.com

Model EMU01

Dell™ PowerVault™ NX1950 Systems

Upgrading Your Operating System

升级操作系统

升級作業系統

Mise à niveau du système d'exploitation

Upgrade des Betriebssystems

OS のアップグレード

운영 체제 업그레이드

Actualización del sistema operativo

www.dell.com | support.dell.com

Dell™ PowerVault™ NX1950 Systems

Upgrading Your Operating System

Notes and Notices

NOTE: A NOTE indicates important information that helps you

make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to

hardware or loss of data and tells you how to avoid the problem.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission

of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerVault are

trademarks of Dell Inc.; Microsoft, Windows, and Windows Server are either

trademarks or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either

the entities claiming the marks and names or their products. Dell Inc. disclaims

any proprietary interest in trademarks and trade names other than its own.

Model EMU01

July 2007 P/N PT413 Rev. A00

Contents 3

Contents

Upgrading Your Operating System . . . . . . . . . . . . . . 5

Upgrading to Windows Unified Data Storage Server 2003,

Enterprise Edition

. . . . . . . . . . . . . . . . . . . . . . . . . . 6

Activating Your Windows License

. . . . . . . . . . . . . . . . . . 10

Upgrading the Dell Integrated Solution Software

Components

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Updating the SAS 5/E Adapter Driver . . . . . . . . . . . . . . . . 13

Updating the Dell PowerVault MD3000 Storage Manager

. . . . . 14

Updating the VDS/VSS Provider

. . . . . . . . . . . . . . . . . . . 16

Updating Firewall Ports

. . . . . . . . . . . . . . . . . . . . . . . 17

Updating the Dell Storage Initialization Wizard

. . . . . . . . . . . 17

Upgrading the Dell|EMC SAN Gateway

Solution Software Components

. . . . . . . . . . . . . . . 18

Setting Up a Cluster Configuration. . . . . . . . . . . . . 18

4 Contents

Upgrading Your Operating System 5

The Dell™ PowerVault™ NX1950 storage solution consists of multiple

components. You must perform a series of steps to upgrade the solution

from a single-node to a multiple-node cluster solution. This document

provides the steps required to upgrade the operating system from

Microsoft

®

Windows

®

Unified Data Storage Server 2003, Standard Edition

to Microsoft Windows Unified Data Storage Server 2003, Enterprise

Edition. It also includes instructions on how to update Dell solution

software components to support a cluster solution.

The following topics are covered in this document:

• Upgrading Your Operating System

• Upgrading the Dell Integrated Solution Software Components

• Upgrading the Dell|EMC SAN Gateway Solution Software

Components

• Setting Up a Cluster Configuration

NOTE: To enable a cluster solution, you must upgrade to Windows Unified Data

Storage Server 2003, Enterprise Edition. For information on setting up a cluster,

see the Dell PowerVault NX1950 Cluster Systems Installation and

Troubleshooting Guide located on the Dell Support website at support.dell.com.

NOTE: Dell recommends that you upgrade the operating system on each

cluster node before setting up the a cluster solution.

Upgrading Your Operating System

NOTICE: When you upgrade your operating system by following the procedures

in this section, only the Windows components will be upgraded. To upgrade the

Dell solution software components, see "Upgrading the Dell Integrated Solution

Software Components" on page 12. If you upgrade your operating system by

booting from the operating system DVD, a clean installation will occur and all

the operating system data will be lost.

Microsoft provides an upgrade path for your operating system software.

The PowerVault NX1950 storage system supports both Windows Unified

Data Storage Server 2003, Standard Edition and Windows Unified Data

Storage Server 2003, Enterprise Edition. The upgrade kit purchased from

Dell includes the upgrade license for Windows Unified Data Storage

Server 2003, Enterprise Edition. The Windows Unified Data Storage

Server 2003, Enterprise Edition supports the cluster solution.

6 Upgrading Your Operating System

NOTE: The terms Microsoft Windows Server

®

2003, Microsoft Windows

Server 2003 R2, Microsoft Windows Storage Server 2003 R2, and Windows

Unified Data Storage Server 2003 may be used interchangeably during the

upgrade procedure, on the System Properties window, and other areas within

the operating system. This configuration is as designed by Microsoft. Refer to

the Certificate of Authenticity (COA) to determine the edition of the installed

operating system.

Upgrading to Windows Unified Data Storage Server 2003,

Enterprise Edition

Contact your Dell sales representative to obtain an upgrade kit.

Each upgrade kit is shipped with a new operating system media and a new

COA label. Remove the COA label from the upgrade kit and place the

label on your Windows Unified Data Storage Server 2003 Standard

Edition label located on the PowerVault NX1950 system.

NOTE: Before upgrading your operating system, Dell recommends that

you back up the data on your system completely.

To upgrade your operating system, perform the following steps:

1

Turn on your system.

2

When prompted, log in to Windows.

3

Locate the Product Key that is provided with the upgrade kit.

This information is required to upgrade your operating system software.

NOTE: The product key is located on the lower section of the COA.

For more information on the COA, see Definition of Terms for Microsoft

Software Owners located at www.dell.com/ostechsheets.

4

Insert the

Microsoft Windows Unified Data Storage Server 2003

DVD

into the DVD drive.

The DVD starts automatically and the

Welcome to Setup

windows

appears.

NOTE: Do not restart your system and boot to the Microsoft Windows

Unified Data Storage Server 2003 x64 Edition DVD.

If the DVD

does not

start automatically:

a

Open Windows Explorer.

b

Locate the DVD drive.

c

Right-click the DVD drive and click

Autoplay

.

Upgrading Your Operating System 7

5

Select I

nstall Windows Server 2003, Enterprise Edition

.

6

In the

Installation Type

section, select

Upgrade

and then click

7

The

License Agreement window

appears. Read the license agreement

and click

installation will not proceed if you do not click

8

In the Product Key window, type the 25-character Product Key

and click

NOTE: The Product Key is located on the COA label that shipped

with your upgrade kit and is placed on your system.

9

When prompted, select

Get Updated Setup Files

and click

NOTE: This procedure may take several minutes to complete.

NOTE: You may be notified that Quick Fix Executables may not remain

resident as shown in Figure 1-1.

Figure 1-1. Windows Server 2003 Enterprise x64 Edition Setup

Your system restarts automatically after you click

8 Upgrading Your Operating System

10

When prompted, log in to your system as

Administrator

.

After you login, the

Windows Server Post-Setup Security Updates

window may appear. Click

Finish

.

11

The

Dell PowerVault NX1950 Storage Initialization Wizard

window

appears. Close this window.

The following message may also appear. If the message does not appear,

proceed to step 12.

MMC cannot open the file

C:\windows\system32\nas.msc. This may also be

because you do not have sufficient access rights

to the file.

This error occurs because the operating system upgrade procedure is

not complete. This error will be fixed after you complete the upgrade

procedures.

Click

OK

to continue.

12

Browse to

D:\cmpnents\R2

and run the

setup2.exe

file,

where

D:\

is the DVD drive.

NOTE: In the Explorer window, do not double-click the DVD icon.

This may restart the upgrade process.

The following message appears:

Windows Server 2003 R2 is installed on your

system. To continue and reinstall Windows Server

R2 files, click Yes. To exit Setup, click No.

13

Click

Yes

to continue.

The

Windows Server 2003 R2 Setup Wizard

window appears.

14

Click

15

In the

Setup Summary

window, review the setup parameters and

then click

The installation procedure continues, and the Windows Storage

Server 2003 x64 R2-specific files are copied to your system.

NOTE: This procedure may take several minutes to complete.

Upgrading Your Operating System 9

16

In the

Completing Windows Server 2003 R2 Setup

window, click

Finish

.

17

When prompted, click

Yes

to restart your system.

18

When prompted, log in to your system as

Administrator

.

The Windows Storage Server 2003 R2 script runs and the Windows

Unified Data Storage Server 2003 R2 x64, Enterprise Edition

components are installed and configured on your PowerVault NX1950

storage system.

NOTE: This procedure may take several minutes to complete.

19

When prompted, log in to your system as

Administrator

.

20

In the

Windows Server Post-Setup Security Updates

window, click

Finish

.

The

Dell PowerVault NX1950 Storage Initialization Wizard

window

appears. Exit from this window.

21

Install the following components from

D:\

, where

D:

\

is the DVD drive.

• D:\cmpnents\feature_packs

• Iscsitarget.exe

• WindowsServer2003-KB919455-x64-enu.exe

• WindowsServer2003-KB919458-x64-enu.exe

• D:\cmpnents\R2\PACKAGES\VDS11\UPDATES

• Update.exe

NOTE: You must reboot the system after installing these files.

22

When prompted, log in to your system as

Administrator

.

The Windows Storage Server 2003 R2 script runs and the Windows

Storage Server 2003 R2 x64 Edition components are installed and

configured on your storage server.

NOTE: This procedure may take several minutes to complete.

23

When prompted, log in to your system as

Administrator

.

24

Remove the

Microsoft Windows Unified Data Storage Server 2003

DVD

from the DVD drive.

10 Upgrading Your Operating System

25

Install the required Microsoft hotfixes. For more information about

the hotfixes, see the

Dell PowerVault NX1950 Systems Support Matrix

on the Dell Support website at

support.dell.com

.

The operating system upgrade procedure is complete.

NOTE: Windows Unified Data Storage Server 2003 is an x64-based

version of the operating system. Ensure that you select the x64 version

of the hotfixes as supported by Microsoft. You may need to reboot the

system after installing the hotfixes.

26

Activate your operating system license with Microsoft within 30 days

to ensure continued access to the system. For information about

activating your Windows license, see "Activating Your Windows

License" on page 10. After activating the Windows license, you must

upgrade the remaining software components. For information about

upgrading the software components, see "Upgrading the Dell

Integrated Solution Software Components" on page 12.

Activating Your Windows License

NOTE: If you inserted the Product ID on the COA label during the installation

procedure, you must now activate your license with Microsoft.

NOTE: For more information on reinstalling your operating system,

see the document Dell PowerVault NX1950 systems Deployment Guide.

License activation technology is used to help prevent illegal software copies.

Dell systems that are preinstalled with the Windows operating system do not

require license activation. The need for activation is indicated by an Activate

Windows window and a corresponding icon on the task bar.

Windows license activation is required in the following cases:

• If your preinstalled windows Product ID is overwritten with the

Product ID on the COA label when you reinstall the operating system.

• If you are upgrading your system from one supported edition to

another supported edition.

Windows license activation is not required if you reinstall the operating

system using the operating system media kit that shipped along with your

system. Administrators are reminded at each login and at intervals of

30 days to complete the activation procedure. If license activation does

not occur after 30 days, the user is blocked from logging into the system.

Upgrading Your Operating System 11

The system is functional and the services remain active. However,

the user must activate the license immediately after logon to continue

using the system.

To activate your license from the Administrator account, double-click the

Windows Activation icon on the task bar or run the following command

from the command prompt:

C:\Windows\system32\oobe\msoobe.exe/a

To activate Windows, perform one of the following procedures:

• Activating Windows Using the Internet

• Activating Windows Using the Phone

Activating Windows Using the Internet

1

Click

Start

→

Run

2

In the Run window, type the following and press <Enter>:

C:\Windows\system32\oobe\msoobe.exe/a

.

3

Select

Yes, lets’s activate Windows over the Internet now

and then click Next.

The

Personal Registration

window appears.

4

Enter your personal registration information and click

The wizard establishes a connection with an activation system

and the processes the activation request.

Activating Windows Using the Phone

1

Click

Start

→

Run

2

In the Run window, type the following and press <Enter>:

C:\Windows\system32\oobe\msoobe.exe/a

.

3

Select

Yes, I want to telephone a customer service representative

to activate Windows

, and then click

The system may take a few seconds to generate an installation ID.

4

Select the appropriate country to display the phone numbers that will

be used and call that number.

12 Upgrading Your Operating System

5

Provide the representative on the phone with the installation ID.

The representative will give you a confirmation ID.

6

Type the confirmation ID in the required field to complete

the activation process.

For more information about Windows license activation and product

registration, see the Windows Server 2003 website at

www.microsoft.com/

windowsserver2003

.

Upgrading the Dell Integrated Solution

Software Components

The PowerVault MD3000 software must be updated to the latest version

to support the dual-node PowerVault NX1950 cluster solution.

The following components must be updated:

• Storage Attached SCSI (SAS) 5/E adapter driver

• PowerVault MD3000 Storage Manager

• Virtual disk service (VDS)/volume shadow copy service (VSS) provider

• Firewall ports script

• Dell Storage Initalization Wizard

Table 1-1 lists the software components and the download paths.

Table 1-1. Download Path for Software Components

Software Component Location

SAS 5/E adapter driver

• Dell Support website at

support.dell.com

•

Dell PowerVault MD3000 Resource

CD

PowerVault MD3000 Storage

Manager

• Dell Support website at

support.dell.com

•

Dell PowerVault MD3000 Resource

CD

VDS/VSS provider Dell Support website

at

support.dell.com

Firewall ports script Dell Support website

at

support.dell.com

Dell Storage Initialization

Wizard

Dell Support website

at

support.dell.com

Upgrading Your Operating System 13

Updating the SAS 5/E Adapter Driver

To update the SAS 5/E adapter driver, see the Dell PowerVault MD3000

Resource CD or the Dell Support website at support.dell.com.

To update the SAS 5/E driver from the Dell Support website,

perform the following steps:

1

Open a web browser and go to

support.dell.com

.

2

Click

Drivers and Downloads

.

3

From the drop-down menu, select the

Product Type

as PowerVault

and

Product Model

as MD3000 and click

Go

.

4

Select the operating system and click

Find Downloads

.

Locate the SAS 5/E adapter driver and download the driver to the system.

To update the SAS 5/E adapter driver from the Dell PowerVault MD3000

Resource CD, perform the following steps:

1

Insert the

Dell PowerVault MD3000 Resource

CD into the DVD drive.

The CD starts automatically

If the CD

does not

start automatically:

a

Open Windows Explorer.

b

Locate the DVD drive

c

Right-click the DVD drive and click

Autoplay

.

2

Select

Install SAS 5/E Adapter Driver

.

If SAS 5/E has already been installed from Windows Unified Data Storage

Server 2003, Standard Edition the Modify/Repair/Remove option appears

as shown in Figure 1-2. Select Modify.

14 Upgrading Your Operating System

Figure 1-2. Dell SAS 5/E Adapter Driver -InstallShield Wizard

Updating the Dell PowerVault MD3000 Storage Manager

To update the PowerVault MD3000 Storage Manager, see the

Dell PowerVault MD3000 Resource CD or the Dell Support website

at support.dell.com.

To update the PowerVault MD3000 Storage Manager from the Dell

Support website, perform the following steps:

1

Open a web browser and go to

support.dell.com

.

2

Click

Drivers and Downloads

.

3

From the drop-down menu, select the

Product Type

as PowerVault

and

Product Model

as MD3000 and click

Go

.

4

Select the operating system and click

Find Downloads

.

Locate the PowerVault MD3000 Storage Manager and download it

to the system.

Upgrading Your Operating System 15

To update the PowerVault MD3000 Storage Manager from the

Dell PowerVault MD3000 Resource CD, perform the following steps:

1

Insert the

Dell PowerVault MD3000 Resource

CD into the DVD drive.

The CD starts automatically

If the CD

does not

start automatically:

a

Open Windows Explorer.

b

Locate the DVD drive

c

Right-click the DVD drive and click

Autoplay

.

2

Select

Install MD3000 Storage Software

.

The installation produces a warning as shown in Figure 1-3.

Figure 1-3. Overwrite Warning

3

Click

OK

.

16 Upgrading Your Operating System

Updating the VDS/VSS Provider

The VDS provider is a critical component to the PowerVault NX1950

solution. To download the latest VDS provider, see the Dell Support

website at support.dell.com.

To update the VDS / VSS provider from the Dell Support website,

perform the following steps:

1

Open a web browser and go to

support.dell.com

.

2

Click

Drivers and Downloads

.

3

From the drop-down menu, select the

Product Type

as PowerVault

and

Product Model

as NX1950 and click

Go

.

4

Select the operating system and click

Find Downloads

.

5

Download the

SMprovider-WSx64-xx.xx.xx.xx.exe

file

where

xx

is the version number.

6

Run the

SMprovider-WSx64-xx.xx.xx.xx.exe

file.

NOTE: You must ensure that you download the x64 version

of the VDS / VSS provider.

The installation produces a warning as shown in Figure 1-4.

Figure 1-4. Overwrite Warning

7

When this warning appears, click

OK

.

Upgrading Your Operating System 17

Updating Firewall Ports

The firewall port exceptions must be updated from those set in Windows

Unified Data Storage Server 2003, Standard Edition to allow cluster

support. Dell has created a script to set the necessary port exceptions

to enable a cluster environment.

To download the latest script, from the Dell Support website perform

the following steps:

1

Download the Dell PowerVault NX1950

Firewall script

batch file

from the Dell Support website at

support.dell.com

.

2

Run the

DSIW-Firewall-xx.yy.zz.bat

file,

where

xx.yy.zz

is the version number.

Updating the Dell Storage Initialization Wizard

The Dell Storage Initialization wizard automates the configuration of

the PowerVault MD3000 storage array and is a critical component of the

PowerVault NX1950 solution. You can download the latest Dell Storage

Initialization wizard from the Dell Support website at support.dell.com.

To update the Dell Storage Initialization wizard from the Dell Support

website, perform the following steps:

1

Open a browser and go to

support.dell.com

.

2

Click

Drivers and Downloads

.

3

From the drop-down menu, select the

Product Type

as PowerVault

and

Product Model

as NX1950 and click

Go

.

4

Select the operating system and click

Find Downloads

.

5

Download the

Dell Storage Initialization

wizard to a removable disk.

6

Insert the removable disk into the PowerVault NX1950 system and run

the file

PVNX1950.msi

.

7

Select

Close

.

8

Reboot your PowerVault NX1950 system.

Your PowerVault NX1950 system is now fully upgraded to Windows

Unified Data Storage Server 2003, Enterprise Edition along with

the required Dell solution software components.

18 Upgrading Your Operating System

Upgrading the Dell|EMC SAN Gateway

Solution Software Components

To enable the Dell|EMC SAN Gateway solution as a cluster, you must

update the operating system to Windows Unified Data Storage Server 2003,

Enterprise Edition. Along with updating the operating system, you must

perform the following:

1

Log in as

administrator

. Exit from the

Dell Storage Initialization

wizard,

PowerVault NX1950 Configuration Tasks

wizard, and

PowerVault NX1950 Management Console.

2

Download and run the following utilities located on the Dell Support

website at

support.dell.com

:

a

Dell Storage Initialization

wizard

NOTE: When you are prompted to select either Repair or Remove,

select Repair.

b

Dell PowerVault NX1950 Firewall Script Batch File - Gateway

Enterprise

NOTE: Verify that the firewall in turned on.

Setting Up a Cluster Configuration

For information on setting up a cluster, see the Dell PowerVault NX1950

Cluster Systems Installation and Troubleshooting Guide.

ページを読み込んでいます...

Dell PowerVault NX1950 ユーザーガイド

関連論文

その他の書類