Sunmi P2 Multifunction Base Smart Payment Terminal ユーザーガイド
- カテゴリ
- ルーター
- タイプ
- ユーザーガイド
设备简介 / Product Profile
指示灯说明 / Status Indication
多功能底座为智能金融终端提供充电、USB接口扩展、Wi-Fi上网和无线数
据传输功能。
The multifunctional base provides charging, USB prot expansion,
Wi-Fi Internet access and wireless data tansmission functions for
Smart Payment Terminal.
产品维修
* 仅适用商米整机设备
Only support for SUNMI
注意事项 / Product Profile
当您发现有异常气味，过热或烟雾情形下，请立刻切断电源。
不要在极端冷、热环境中使用，例如靠近火源或点燃的香烟；
尽量在清洁无尘环境中使用，避免细小物品落入终端中；
在未获允许的情况下，不要在医疗设备附近使用。
声明
本公司不对以下行为负责
不在本指南说明的条件下使用和维护所造成的损坏；
对于如何因选件或耗材(非本公司提供之最初产品或认可产品)
造成的损坏或问题，本公司将不承担任何责任。 未经本公司
同意，无权进行产品修改或变动。
免责申明
由于产品的更新，此文档的某些细节可能与产品不符，请以实
物为准，此文档的解释权归本公司。
保留不预先通知的情况下，修改本说明书的权利。
有毒有害物质或元素
部件名称
电路板组件
结构件
包装件
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI)
多溴联苯
(PBB)
铅
(Pb)
多溴二苯醚
(PBDE)
本产品有毒有害物质名称及含量标识表
Table for Names and Content Identification of Toxic and Hazardous
Substances in this Product
○：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T11363-2006规定的限量要求以下。
Ｘ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T11363-2006规定的限量要求；但是上表中打“×”的部件，其含量超出
是因为目前业界还没有成熟的可替代的技术。
对达到或超出环保使用年限的产品，应依据《电子信息产品控制管理办法》
规定进行回收再利用，不应随意丢弃。
QUICK START GUIDE
产品名称：
产品型号：
产品编号：
购买日期：
保修期限：自购买之日起，我公司提供 天保修服务。
联系方式：
· 公司地址：
· 联系电话：
以下情况恕不提供免费保修：
· 未经允许擅自拆卸修理的产品。
· 产品条码、易碎贴破损及保修卡涂改、残缺的。
· 未按照说明书的要求操作设备所引起的故障。
· 因进水或跌落而造成的故障、划伤或破损的人为损坏。
· 因不可抗拒因素造成的故障或损坏。
· 保修期限外。
When you notice an unusual smell, overheating or smog, turn off
the power immediately.
Do not use in extremely hot and cold environments, such as near
fire or lit cigarettes;
Try to use it in a clean, dust-free environment to prevent small
items from falling into the terminal;
Do not use it near medical equipment without permission.
Statements
The company is not responsible for the following actions
Damage caused by use and maintenance without the conditions
described in this guide;
The company will not be responsible for any damages or problems
caused by the alternatives or consumables (not the original
products or approved products provided by the company). Without
consent of the company. It is not authorized to make product
modifications or changes.
Disclaimer
Due to product updates, some details of this document may not
match the product, please refer to the actual product, and the right
to interpret this document belongs to the company. The right to
modify this guide without prior notice is reserved.
制造商：上海商米科技集团股份有限公司
地 址：上海市杨浦区淞沪路388号创智天地7号楼505室
Shanghai Sunmi Technology Co., Ltd.
Address: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
技术规格/ Technical specifications
技术规格信息请访问网站“www.sunmi.com”了解更多。
For more technical specifications, please visit: www.sunmi.com.
* The product information listed on this page may be updated from time to time due
to product upgrades or other reasons. SUNMI reserves the right to modify the
product information and contents on this page without notice.
This symbol means that it is forbidden to dispose the product of with normal
household waste. At the end of the product life cycle, waste equipment
should be taken to designated collection points, returned to the distributor
when purchasing a new product, or contact your local authority representa-
tive for detailed information on WEEE recycling.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interference received,including
interference that may cause undesired operation.
EU Representative :SUNMI France SAS
186,avenue Thiers,69006 Lyon,France
This device complies with the basic recommendations and other relevant
measures in the 2014/30/EU and 2014/35/EU directive.
subject to the following two conditions: (1) this device may not cause
radio or television reception, which can be determined by turning the
Conformity CE
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that this device is in
compliance with the essential requirements and other relevant provisions of Radio
Equipment Directive 2014/53/EU.The full text of the EU declaration of conformity is
available at the following internet address: https://developer.sun-
mi.com/docs/read/en-US/maaeghjk480
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
ISED Canada compliance statements
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1)
L’appareil ne doit pas produire de brouillage, et (2) L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
This equipment complies with RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
ce matériel est conforme aux limites de dose d'exposition aux rayonnements, CNR-102
énoncée dans un autre environnement.cette eqipment devrait être installé et exploité avec
distance minimale de 20 entre le radiateur et votre corps.
未装上主机，可通过搜索并连接底座WiFi进行上网；如果需要改变底座WiFi配置，先移除以太网
接口的网线，主机连接底座WiFi，在主机的浏览器网页输入“192.168.1.1”，进入路由器设置系
统（账号：admin，密码：admin)，进入“无线-热点设置”设置WiFi名称和密码。
If you need to change the WiFi configuration of the POS Base , First remove the network
cable of the Ethernet interface, connect the host to the POS Base WiFi, enter "192.168.1.1"
on the host's browser page, enter the router setting system (account: admin, password:
admin), and enter "Wireless-Hotspot Settings" to set the WiFi name and password.
输入/Input: AC110 ～ 220V/0.3 ～ 0.4A
输出/Output: DC5V/2A，USB Type-C 接口
适配器
Adapter
M05054296
直接装上主机，开始充电或通过底座上网（选配）
Put POS on Base, then start charging, or access internet through the Base (Optional）
复位孔
RJ11口(选配)
mm
制 图：
发行日期
图纸名称
供应商料号供 应 商
版本
单位
A
B
C
D
E
F
1 2 3 4 5 6 7 8
87654321
F
E
D
C
B
A
P2底座 说明书
变更原因
张亚璐
20220725
1.3
要求：
Left
Color
Status flashing
Right
颜色
状态
无网络
网线无连接
灭亮闪烁
网线连接
传输数据
Off On
No network Transfer data
Network cable connectionNo network connection
黄灯
绿灯
/
/
USB口 以太网口(选配)
Type C 口
-
1
