2
.# Create VLAN 100 and VLAN Interface,and confige IP Address for this
interface
<AWA> system-view
[AWA] vlan 100
[AWA-vlan100] quit
[AWA] interface vlan-interface 100
[AWA-Vlan-interface100] ip address 192.1.1.1 24
[AWA-Vlan-interface100] quit
# Confige Vlan-interface 1 for dhcp-alloc。
[AWA] interface vlan-interface 1
[AWA-Vlan-interface1] undo ip address
[AWA-Vlan-interface1] ip address dhcp-alloc
[AWA-Vlan-interface1] quit
(2) Confige Wireless Service Temple。
# Create Service Tmemple, go to Wireless Service View.
[AWA] wlan service-template service
# Confige SSID service。
[AWA-wlan-st-service] ssid service
# Confige Wireless Service for VLAN 100.。
[AWA-wlan-st-service] vlan 100
# Confige key management mode.
[AWA-wlan-st-service] akm mode psk
[AWA-wlan-st-service] presharedkey pass-phrase simple 12345678
# Confige Cipher suite to CCMP.。
[AWA-wlan-st-service] cipher-suite ccmp
[AWA-wlan-st-service] security-ie rsn
# Enable WLAN Service Template.
[AWA-wlan-st-service] service-template enable
[AWA-wlan-st-service] quit
(3) Go to WLAN-Radio 1/0/1 Interface ,and bind service-template to wlan-radio 1/0/1.
[AWA] interface wlan-radio 1/0/1
[AWA-WLAN-Radio1/0/1] service-template service
[AWA-WLAN-Radio1/0/1] quit
(4)Confige DHCP Service。
# Enable DHCP。
[AWA] dhcp enable
# Create DHCP ip-pool named vlan100 for client.
[AWA] dhcp server ip-pool vlan100
[AWA-dhcp-pool-vlan100] network 192.1.1.0 mask 255.255.255.0
[AWA-dhcp-pool-vlan100] gateway-list 192.1.1.1
[AWA-dhcp-pool-vlan100] quit
3
3.3 Confirm Configuration.
# display wlan client verbose
[AWA] display wlan client verbose
Total number of clients: 1
MAC address : 3829-5a40-9589
IPv4 address : 192.1.1.2
IPv6 address : N/A
Username : N/A
AID : 1024
Radio ID : 1
SSID : service
BSSID : d461-fe59-4d20
VLAN ID : 1
Sleep count : 3
Wireless mode : 802.11an
Channel bandwidth : 40MHz
20/40 BSS Coexistence Management : Supported
SM power save : Enabled
SM power save mode : Static
Short GI for 20MHz : Supported
Short GI for 40MHz : Supported
STBC RX capability : Supported
STBC TX capability : Not supported
LDPC RX capability : Not supported
Block Ack : TID 0 In
Supported HT MCS set : 0, 1, 2, 3, 4, 5, 6, 7
Supported rates : 6, 9, 12, 18, 24, 36,
48, 54 Mbps
QoS mode : WMM
Listen interval : 2
RSSI : 48
Rx/Tx rate : 135/6
Authentication method : Open system
Security mode : RSN
AKM mode : PSK
Cipher suite : CCMP
User authentication mode : Bypass
Authorization ACL ID : N/A
Authorization user profile : N/A
Roam status : N/A
Key derivation : SHA1
PMF status : N/A
Forwarding policy name : N/A
Online time : 0days 0hours 0minutes 8seconds
FT status : Inactive
4
3.4 Confige File
[AWA]display current-configuration #
version 7.1.064, ESS 2326
#
sysname AWA
#
telnet server enable
#
port-security enable
#
dhcp enable
#
password-recovery enable
#
vlan 1
#
vlan 100
#
dhcp server ip-pool vlan100
gateway-list 192.1.1.1
network 192.1.1.0 mask 255.255.255.0
#
wlan service-template service
ssid service
vlan 100
akm mode psk
preshared-key pass-phrase cipher $c$3$7hZ2DNiI+h/ajPE7DhZbD6Y7py9vqf4721sp
cipher-suite ccmp
security-ie rsn
service-template enable
#
interface NULL0
#
interface Vlan-interface1
ip address dhcp-alloc
#
interface Vlan-interface100
ip address 192.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/1
#
interface GigabitEthernet1/0/2
#
interface WLAN-Radio1/0/1
service-template service
#
5
interface WLAN-Radio1/0/2
service-template 1
#
interface WLAN-Radio1/0/3
service-template 1
#
return
-
1
-
2
-
3
-
4
-
5
