3. Install the remote control batteries. For more information, see the documentation that
shipped with your remote control.
4. Turn on your computer.
5. Click Start→ All Programs→ Windows Media Center→ Tasks→ Settings→ TV.
6. Follow the instructions on the screen.
Setting Up Your Computer Using a TV Tuner Card
and Set-Top Box (Optional)
NOTE: The Radio Frequency (RF) cable must be purchsed separately.
1. Connect the set-top box to your computer using the RF cable.
2. Locate the IR sensor on your set-top box.
3. Peel the protective cover on the IR-transmitter.
4. Place the IR-transmitter directly over the IR-sensor on your set-top box.
5. Connect the other end of the cable to the IR-emitter connector on your computer.
6. Install the remote control batteries. For more information, see the documentation that
shipped with your remote control.
7. Turn on your computer.
8. Click Start→ All Programs→ Windows Media Center→ Tasks→ Settings→ TV.
9. Follow the instructions on the screen.
NOTE: For more information on configuring and troubleshooting your TV tuner card, see
the User’s Guide at support.dell.com/manuals.
__________________
Information in this document is subject to change without notice.
© 2011 Dell Inc. All rights reserved. Printed in China. Printed on Recycled Paper.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell
™
, the DELL logo, and Inspiron
™
are trademarks of DellInc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
2011 - 06 P/N 9HD32 Rev. A00