7
en
Universal cutter (for some models)
Before use, read these instructions carefully
in order to become familiar with important
safety and operating instructions for this
appliance. Please keep the operating
instructions in a safe place. If passing
on the appliance to a third party, always
include the operating instructions.
On account of the different models, it
is possible that not all accessories are
included in your set. These are also
available separately from customer service.
Important information
When the rear aperture is open, the appli-
ance can be operated using instantaneous
switching only. Selector switch 1–5 will not
function. Move slide for actuating the lock in
switch position 0 only.
Attention:
Before using the appliance for the rst time,
clean all parts of it.
Universal cutter
(for some models)
Overview
Please fold out the illustrated pages.
Figure A
1 Universal cutter jug
2 Blade
3 Attachment
4 Lid
Operation
The universal cutter is suitable for cutting
meat, hard cheese, onions, herbs, garlic,
fruit, vegetables, nuts, almonds.
Always observe the maximum quantities
and processing times in the table (Fig. D).
Warning!
The universal cutter must be completely
assembled before use.
Caution!
Before cutting meat, remove gristle, bones
and sinews. The universal cutter is not
suitable for cutting very hard items (coffee
beans, radishes, nutmeg) and frozen food
(fruit, etc.).
W Risk of injury from sharp blade /
rotating drive!
Never grip the blade in the universal cutter.
Never clean cutting blade with bare hands.
Use a brush. Take hold of the cutter blade
by the plastic handle only.
Figure B
■ Place the universal cutter on a smooth,
clean work surface and press.
■ Insert the blade.
■ Add food.
■ Place the attachment on the universal
cutter and rotate in a clockwise direction
until it “clicks” into position.
■ Open the lock of the rear aperture and
hold in place.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold the base unit and universal cutter
rmly and switch on the appliance at
setting M.
■ Switch off the appliance after
processing.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
After using the appliance/
cleaning
Warning!
Never immerse the attachment of the
universal cutter in water and do not clean
under owing water or in the dishwasher.
■ Press the release buttons and remove
the base unit from the attachment.
■ Rotate the attachment in an
anticlockwise direction and remove from
the universal cutter.
■ Take hold of the blade by the plastic
handle and take out.