© 2016 Koninklijke Philips N.V.
保留所有权利
3140 035 38003
English
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register
your product at www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the
appliance and keep it for future reference.
• WARNING: Do not use this
appliance near water.
• When the appliance is used in
a bathroom, unplug it after use
since the proximity of water
presents a risk, even when the
appliance is switched o.
• WARNING: Do not use
this appliance near
bathtubs, showers,
basins or other vessels
containing water.
在以下网站注册并获得支持
www.philips.com.cn/welcome
HP4989
• Always unplug the appliance
after use.
• If the appliance overheats,
it switches o automatically.
Unplug the appliance and let
it cool down for a few minutes.
Before you switch the appliance
on again, check the grilles to
make sure they are not blocked
by u, hair, etc.
• If the mains cord is damaged,
you must have it replaced by
a service centre or similarly
qualied persons in order to
avoid a hazard.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
• For additional protection, we
advise you to install a residual
current device (RCD) in the
electrical circuit that supplies
the bathroom. This RCD must
have a rated residual operating
current not higher than 30mA.
Ask your installer for advice.
• Do not insert metal objects into
the air grilles to avoid electric
shock.
• Never block the air grilles.
• Before you connect the
appliance, ensure that the
voltage indicated on the
appliance corresponds to the
local power voltage.
• Do not use the appliance
for any other purpose than
described in this manual.
• Do not use the appliance on
articial hair.
• When the appliance is
connected to the power, never
leave it unattended.
• Never use any accessories or
parts from other manufacturers
or that Philips does not
specically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
• Do not wind the mains cord
round the appliance.
• Wait until the appliance has
cooled down before you store it.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic elds.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in at
an ocial collection point for recycling. By doing this,
you help to preserve the environment.
2 Dry your hair
1 Check if the dual voltage switch ( d ) on the bottom
back of the handle has been set to the local mains
voltage before you connect the appliance. You can adjust
the position of the dual voltage switch by means of a
screwdriver or coin.
2 Connect the plug to a power supply socket.
• For precise drying, attach the concentrator ( a ) on the
hairdryer( b ).
• To disconnect the concentrator, pull it o the hairdryer.
3 Adjust the temperature switch ( c ) to for hot and
strong airow for fast drying, for warm and gentle
airow for drying short hair or styling hair, or for cool
airow to set your style.
• The ion function activates when an airow is selected.
The function provides additional shine and reduces
frizz.
» When the function is on, a special odor may be
smelt. It is normal and caused by the ions which are
generated.
After use:
1 Switch o the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance by damp cloth.
4 Fold the appliance ( f ).
5 Keep it in a safe and dry place, free of dust. You can also
hang it with the hanging loop ( e ).
3 Guarantee and service
If you need information e.g. about replacement of an
attachment or if you have a problem, please visit the Philips
website at www.philips.com.cn/support or contact the
Philips Consumer Care Center in your country.The phone
number is in the worldwide guarantee leaet. If there is
no Consumer Care Centre in your country, go to your local
Philips dealer.
4 Troubleshooting
Problem Cause Solution
The
appliance
does not
work at
all.
The power socket to
which the appliance
has been connected
may be broken.
Check the appliance is
plugged in correctly.
The appliance
may have
overheated and
switched itself o.
Unplug the appliance
and let it cool down for
a few minutes. Before
you switch on the
appliance again, check
the grilles to make sure
they are not blocked
by u, hair, etc.
The appliance may
not be suitable
for the voltage to
which it has been
connected.
Adjust the dual voltage
switch to match the
local power voltage.
EN User manual
ZH-CN 用户手册
b
f
e
c
d
a
产品中有害物质的名称及含量
部件名称
有害物质
铅
（
Pb
）
汞
（
Hg
）
镉
（
Cd
）
六价铬
（
Cr6+
）
多溴联苯
（
PBB
）
多溴二苯醚
（
PBDE
）
马达
X
O O O O O
负离子发生器
X
O O O O O
电源线
X
O O O O O
本表格依据
SJ/T 11364
的规定编制。
O
：表示该有害物质在该部件所有均质材料中的含量均在
GB/T 26572
规定的限量要求以下。
X
：表示该有害物质至少在该部件的某一均质材料中的含量超出
GB/T 26572
规定的限量要求。
简体中文
感谢您的惠顾，欢迎光临飞利浦！为了
您能充分享受飞利浦提供的支持，请在
www.philips.com.cn/welcome
注册您的产品。
1 重要事项
使用产品之前，请仔细阅读本用户手册，
并妥善保管以供日后参考。
• 警告：请勿在靠近水的地方使用本
产品。
• 本产品在浴室内使用时，使用后拔
下插头，因为即使本产品开关断开
后，接近水仍存在危险。
• 警告符号注释：禁止在洗澡
或淋浴时使用
• 警告：不要在盛水的浴缸、淋浴、
洗脸盆或其他器皿附近使用本器
具。
• 使用后务必拔下产品的插头。
• 如果产品过热，它将自动关闭电
源。拔掉产品插头，让其冷却几分
钟。再次启动产品之前，请检查出
风口，确保其未被绒毛、头发等杂
物堵塞。
• 如果电源线损坏，为了避免危险，
必须由制造厂或其维修部或类似的
专职人员来更换。
• 本产品适合由
8
岁或以上年龄的
儿童以及肢体不健全、感觉或精神
上有障碍或缺乏相关经验和知识的
人士使用，但前提是有人对他们使
用本产品进行监督或指导，以确保
他们安全使用，并且让他们明白
相关的危害。不得让儿童玩耍本产
品。不要让儿童在无人监督的情况
下进行清洁和保养。
• 为了增加保护，建议在浴室供电的
电气回路中安装一个额定剩余工作
电流不超过
30mA
的剩余电流装
置
(RCD)
。详情请向
RCD
安装
商咨询。
• 切勿将金属物体插入风口，
以免触电。
• 切勿阻塞电吹风风口。
• 连接产品之前，请确保产品上标示
的电压与当地电源电压相符。
• 请勿将本产品用于本手册中说明以
外的任何其它用途。
• 请勿对假发使用本产品。
• 当产品连接了电源时，切勿让其无
人看管。
• 切勿使用由其它制造商生产的，或
未经飞利浦特别推荐的任何附件或
部件。如果使用此类附件或部件，
您的保修将失效。
• 切勿将电源线缠绕在产品上。
• 待产品完全冷却后再存放。
• 使用后请勿拉扯电源线。拔下产品
插头时，请握紧插头。
• 切勿用湿手操作本产品。
• 产品只能送到飞利浦授权的服务中
心检修。由不合格人员进行修理可
能将用户置于极度危险的境地。
电磁场 (EMF)
本飞利浦产品符合所有有关暴露于电磁场
的适用标准和法规。
环保
弃置产品时，请不要将其与一般生活
垃圾堆放在一起，应将其交给政府指
定的回收中心。这样做有利于环保。
2 吹干头发
1 在您将产品连接至电源之前，请检查手
柄底部背面的双电压开关 ( d ) 是否
设定为当地的电源电压。您可以用螺丝
刀或硬币来调整双电压开关的位置。
2 将插头连接至电源插座。
3 要更精确地吹干头发，请将集风嘴
( a ) 安装到电吹风 ( b ) 上。
• 要卸下集风嘴，将其从电吹风中拉
出即可。
4 将温度开关 ( c ) 调至 可获得强
劲热风，用于快速吹干；调至 可获
得温和的暖风，用于吹干短发或定型；
调至 可获得冷风，用于塑造发型。
• 选定风速后，负离子功能将激活。
此功能可令秀发更加闪亮、顺滑。
» 当此功能处于打开状态时，可能会
发出一种特殊气味。这是正常情
况，是由所产生的负离子导致的。
使用后
：
1 请关闭产品并拔下电源插头。
2 将产品置于隔热表面上，直至其冷却。
3 用湿布清洁本产品。
4 折叠产品 ( f )。
5 将产品存放在安全、干燥、清洁的
位置。您也可以使用挂环 ( e ) 将产
品挂起存放。
3 保修与服务
如果您需要了解有关信息（如
更换附件的相关信息）或有任
何疑问，请访问飞利浦网站
www.philips.com.cn/support
或
与您所在国家
/
地区的飞利浦客户服务中
心联系。电话号码可以在全球保修卡中找
到。如果您所在的国家
/
地区没有飞利浦
客户服务中心，请向当地的飞利浦经销商
求助。
4 故障排除
问题 原因 解决方法
产品完
全无法
工作。
产品所连接的
电源插座可能
已损坏。
检查设备已正
确插入。
产品可能过
热，因此自动
断电。
拔掉产品插
头，让其冷却
几分钟。再次
打开产品电源
之前，请检查
出风口，确保
没有被绒毛、
头发等杂物
堵塞。
产品连接的
电源电压可能
与产品电压
不符。
将双电压开关
调整为符合当
地电源电压。
保留备用
出版日期：
2016-06-30
ϔ৮ 喟下ݖ⊓⩢०䷻
ಸत 喟)1
䷊Ⴧ⩢ࢸ 喟7_
䷊Ⴧ䶾⢴ 喟)[
䷊Ⴧ䓀ڒߌ⢴ 喟8
⩌ϔᬒ 喟䄤㻮ϔ৮ᱧ䏘
ϔౝ 喟͚పᎬ͉͉㣋
⤍⊤㏼≻➦ࡧ下ݖ⊓უᏚ⩢கᰶ䭽ڙथ
͚ప⤍⊤ጯ̶▣䩴⥡ⴠጒ͇ࡧ
ڕప䶫ߎ☚㏬喟
᱙ϔ৮ᵦᢛపᴴ(#
(#(#
ࣷ(#ݣ䕍
-
1
-
2
