© 2016 Koninklijke Philips N.V.
保留所有权利
3140 035 27825
English
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register
your product at www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the
appliance and keep it for future reference.
• WARNING: Do not use this
appliance near water.
• When the appliance is used in
a bathroom, unplug it after use
since the proximity of water
presents a risk, even when the
appliance is switched o.
• WARNING: Do not use
this appliance near
bathtubs, showers,
basins or other vessels
containing water.
在以下网站注册并获得支持
www.philips.com.cn/welcome
HP4988
• Always unplug the appliance
after use.
• If the appliance overheats,
it switches o automatically.
Unplug the appliance and let
it cool down for a few minutes.
Before you switch the appliance
on again, check the grilles to
make sure they are not blocked
by u, hair, etc.
• If the mains cord is damaged,
you must have it replaced
by Philips, a service centre
authorised by Philips or similarly
qualied persons in order to
avoid a hazard.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
• For additional protection, we
advise you to install a residual
current device (RCD) in the
electrical circuit that supplies
the bathroom. This RCD must
have a rated residual operating
current not higher than 30mA.
Ask your installer for advice.
• Do not insert metal objects into
the air grilles to avoid electric
shock.
• Never block the air grilles.
• Before you connect the
appliance, ensure that the
voltage indicated on the
appliance corresponds to the
local power voltage.
• Do not use the appliance
for any other purpose than
described in this manual.
• Do not use the appliance on
articial hair.
• When the appliance is
connected to the power, never
leave it unattended.
• Never use any accessories or
parts from other manufacturers
or that Philips does not
specically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
• Do not wind the mains cord
round the appliance.
• Wait until the appliance has
cooled down before you store it.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic elds.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in at
an ocial collection point for recycling. By doing this,
you help to preserve the environment.
2 Dry your hair
1
Adjust the dual voltage switch ( ) to match the local
power voltage, with 1600W use 240V and with 1350W use
22 0V.
2 Connect the plug to a power supply socket.
• For precise drying, attach the concentrator ( ) onto
the hairdryer ( ).
• To disconnect the concentrator, pull it o the hairdryer.
3 Adjust the temperature switch ( ) to for hot and strong
airow for fast drying, for warm and gentle airow for
drying short hair or styling hair, or for cool airow to set
your style.
After use:
1 Switch o the appliance and unplug it.
2 Place it on a heat-resistant surface unit it cools down.
3 Clean the appliance by damp cloth.Fold the
appliance ( ).
4 Keep it in a safe and dry place, free of dust. You can also
hang it with the hanging loop ( ).
3 Guarantee and service
If you need information or if you have a problem, please visit
the Philips website at www.philips.com/support or contact
the Philips Customer Care Centre in your country (you nd
its phone number in the worldwide guarantee leaet). If
there is no Consumer Care Centre in your country, go to your
local Philips dealer.
4 Troubleshooting
Problem Cause Solution
The
appliance
does not
work at all.
The power
socket to which
the appliance
has been
connected may
not live.
Ensure the socket is live.
The appliance
may have
overheated and
switched itself
o.
Unplug the appliance and
let it cool down for a few
minutes. Before you switch
on the appliance again,
check the grilles to make
sure they are not blocked
by u, hair, etc.
The appliance
may not be
suitable for
the voltage
to which it
has been
connected.
Adjust the dual voltage
switch to match the local
power voltage.
EN User manual
ZH-CN 用户手册
a
f
b
c
d
e