2EN
IMPORTANT
MOUNT ON REAR TRAY
●
Read and understand all instructions before you use the apparatus. If damage is caused by
failure to follow instructions, the warranty does not apply.
●
Use only the supplied mounting hardware for a safe and secure installation.
●
Do not continuously use the speaker system beyond the peak power handling capacity.
●
Keep credit cards, watches, recorded tapes etc. with magnetic coding away from the
speaker system to prevent damage caused by the magnets in the speakers.
●
Clean the apparatus with soft, damp cloth. Never use substances such as alcohol, chemicals
or household cleaners on the apparat us.
You can mount the subwoofer on the rear tray.
●
Set the wiring firmly on the floor of the vehicle,taking the utmost care not to break wires while
installing.
1. Turn off the car ignition key.
IF the power is on,the click noise generated by the connection may damage the subwoofer.
2. Cut out the mounting template from the packing box and paste it onto the location selected
for mounting the subwoofer.
3. Mark the cut-off hole and the 8 bolt holes.
4. Cut out the marked area and drill the bolt holes.
5. Connect the subwoofer to the amplifier.
●
Consult the diagram below. Be sure to connect corresponding terminals, i.e.“+”to“+”and“-”
to “-”.connection with reversed polarity will degrade the quality of production.
English