EZ-PB10

EZCast Pro EZ-PB10, B10, Box II ユーザーガイド

  • こんにちは!EZCast Pro Box II B10のクイックスタートガイドの内容を理解しています。このデバイスの機能、設定方法、トラブルシューティングなど、ご質問にお答えします。お気軽にご質問ください!
  • EZCast Pro Box II B10を電源オンするにはどうすればよいですか?
    Wi-Fi接続を改善するにはどうすればよいですか?
    VGA信号を出力するにはどうすればよいですか?
    Miracastで接続するにはどうすればよいですか?
    AirPlayで接続するにはどうすればよいですか?
EZCast Pro Box II
Model: B10
QUICK START GUIDE
Introduction
Thank you for purchasing EZCast Pro Box II.
This Quick Start Guide is designed to guide
you through the installation.
EZCast Pro Box II realizes the true BYOD
meeting room by supporting Windows,
macOS, Android, iOS, and ChromeOS.
Learn More
Please visit www.ezcast-pro.com for more
information.
POWER LAN USB 5G
EZCast Pro Box II
HDMI A to A Cable 1m
EZCast Pro Box II QSG
5V Universal Adapter
HDMI Adapter with HDMI
female port, VGA female
port, 3.5mm port
Package Contents
System Requirements
Windows 7/8/10
macOS 10.11 and above
Android 5.0 and above
iOS 10.0 and above
ChromeOS
*Please note that all specifications are subject to change
without prior notice.
Hardware Overview Part I
Back Panel
Port
Description
DC Port
Power Button
Reset Button
USB Port
Ethernet Port
HDMI Port
DC Port
Power Button
Reset Button
USB Port
Ethernet Port
HDMI Port
Hardware Overview Part II
LEDs
LED
State
Description
Power
White
Power ON
Grey
Power OFF
LAN
White
Connected to Ethernet cable
Grey
Not connected to Ethernet cable
USB
White
Connected to USB device
Grey
Not connected to USB device
Wi-Fi
White
Connected to Wi-Fi
Grey
Not connected to Wi-Fi
Power
LAN
Wi-Fi
USB
Product Installation
Step 1: Connect the Universal 5V Adapter to the
EZCast Pro Box II’s DC port.
Step 2: Connect the HDMI A to A cable to the EZCast
Pro Box II’s HDMI port.
Step 3: Press the Power button to activate EZCast Pro
Box II.
* For better Wi-Fi connection, please place the EZCast Pro
Box II in line of sight.
* If you need to output VGA signal, please use the HDMI to
VGA adapter we bundled.
Cast with EZCast Pro App
Step 1: Scan the QRCode below to
download the EZCast Pro App.
Step 2: Install EZCast App on your device.
Step 3: Find EZCast Pro Box II’s SSID in
your device’s Wi-Fi list, enter the password.
Step 4: Open EZCast Pro App and connect
to the EZCast Pro Box II.
Step 5: Start casting or using the
value-added functions in EZCast Pro App!
Cast with Native Protocol
Miracast
For Windows user, please press Win + K.
and select your EZCast Pro Box II.
For Android user, find “Wireless casting” in
Setting to select your EZCast Pro Box II.
Please note that each mobile device
manufacturer has its own naming rule for
Miracast.
Cast with Native Protocol
AirPlay
Step 1: Find EZCast Pro Box II in your
device’s Wi-Fi list, and enter the password.
Step 2: Open “Screen Mirroring” in your
device to select your EZCast Pro Box II.
Specifications
EZCast Pro Box II B10
CPU
Dual Core CPU, 1Ghz max
Output/Input
Resolution
Up to 4K @ 30Hz
I/O
HDMI
Ethernet
USB Type A
Wi-Fi
802.11ac 2T2R,
Max bandwidth 866Mbps (5Ghz)
Ethernet
10/100/1000M, support POE
Power
DC 5V, 2A
Working Temp
0~40°C
Storage Temp
-20~70°C
Safety Notice
1. Read and follow all these safety instructions.
2. Heed all warnings.
WARNING: DO NOT expose this product to
rains or moisture.
WANRING: DO NOT use this product in the
location where it might be submerged by water.
WANRING: Place this product indoor and
away from windows and doors to avoid lighting
strikes.
Compliance
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20cm between the radiator & your body
©2019 Actions Microelectronics Co., Ltd. All right reserved.
EZCast, and EZCast Pro are trademarks of Actions
Microelectronic Co., Ltd., registered in China and other
countries. Other product and company names mentioned
herein may be trademarks other respective companies.
EZCast Pro Box II
產品型號: B10
快速使用手冊
簡介
感謝您購買 EZCast Pro Box II 無線投影盒。
《快速使用手冊》旨在協助您快速完成安裝及上
手使用本產品。
透過支援 WindowsmacOSAndroidiOS
ChromeOS 作業系統EZCast Pro Box II
可以真正實現 BYOD 智慧辦公室,大大提升工
作效率。
瞭解更多
有關 EZCast Pro Box II 更多資訊,請前往
www.ezcast-pro.com
POWER LAN USB 5G
接收器
HDMI A to A
1m×1
快速使用手冊
5V 電源供應器
HDMI 轉接器,包含 HDMI
母接頭、VGA 母接頭、
3.5mm 接頭
包裝內容
系統要求
Windows 7/8/10
macOS 10.11 及以上
Android 5.0 及以上
iOS 10.0 及以上
ChromeOS
*請注意,所有規格如有變更,恕不另行通知。
背板
硬體概述 Part I
介面
說明
DC 介面
電源鍵
重置鍵
USB 介面
乙太網路介面
HDMI 介面
DC 介面
電源鍵
重置鍵
USB 介面
乙太網路介面
HDMI 介面
LED 指示燈
硬體概述 Part II
指示燈
狀態
說明
Power
白色
通電
灰色
關機
LAN
白色
連接到乙太網
灰色
未連接到乙太網
USB
白色
連接到 USB 設備
灰色
未連接到 USB 設備
Power
LAN
Wi-Fi
USB
Wi-Fi
白色
連接 Wi-Fi
灰色
未連接 Wi-Fi
/