Fujifilm MCEX-11 / MCEX-16 取扱説明書

カテゴリ
カメラレンズ
タイプ
取扱説明書
MCEX-11/16
Precautions
MACRO EXTENSION TUBE
The MACRO EXTENSION TUBE is an extension cylinder
which does not affect lens performance, but it can be
only used on shooting areas where the lens itself cannot
show proper performance.
Only attach when shooting macro.
When the macro extension tube is attached, the camera
can no longer focus on distant points, and the focus
range becomes narrower.
The MACRO EXTENSION TUBE provides greater
magnification when used with a wide angle lens. The
distance, however, between a subject and the lens
become smaller, and the focus range becomes narrower.
Also, the peripheral resolution decreases as the angle of
view becomes wider.
Focus
When the MACRO EXTENSION TUBE is attached, the
focus range is limited. It is necessary to find a focus point
by moving the camera forward and back. Autofocus is
available in the focus range, but using the manual focus is
recommended for fine adjustments.
If the focus does not work, there is a possibility that
the MACRO EXTENSION TUBE is not attached correctly.
Check whether the alignment indicators on the MACRO
EXTENSION TUBE and lens are correct.
Exposure
When the MACRO EXTENSION TUBE is attached, the
distance between the aperture and the sensor becomes
longer, so the lens produces a darker image. However,
appropriate exposure can be obtained if shooting in AE.
If you want to manually use an external flash, use it by
adjusting the flash compensation.
Multiple Connections
The MACRO EXTENSION TUBE may malfunction if two or
more connections are layered.
Mount adapter
You can use it in combination with our companys M
mount adapter.
Other precautions
When the MACRO EXTENSION TUBE is used, the
distance indicator will not display the correct value.
The optical correction frame of the hybrid viewfinder
will be displaced.
Its use is not covered by a performance guarantee, so
various aberration corrections will be shifted from their
proper value.
Blurred focus points will not be properly corrected.
Exif information will not be recorded correctly.
Specifications
MCEX-11
Barrel length : 11 mm (0.4 in.)
Diameter : ø 58 mm (2.2 in.)
Weight : Approx. 50 g (1.7 oz.)
MCEX-16
Barrel length : 16 mm (0.6 in.)
Diameter : ø 58 mm (2.2 in.)
Weight : Approx. 67 g (2.3 oz.)
BL00004691-100BL00004691-101
MACRO EXTENSION TUBE
MCEX-11/16
ENGLISHENGLISH
Safety Notes
While every care has been taken to ensure that this
product is safe, read the instructions provided below to
ensure that you use the product correctly.
After reading these instructions, be sure to keep them
handy for future reference.
The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
WARNINGWARNING
This icon indicates that death or serious
injury can result if the information is ignored.
CAUTIONCAUTION
This icon indicates that personal injury
or material damage can result if the
information is ignored.
The icons shown below are used to indicate the nature
of the instructions which are to be observed.
Triangular icons tell you that this information
requires attention (“Important”).
Circular icons with a diagonal bar tell you that
the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate
an action that must be performed (“Required”).
WARNING WARNING
Do not
disassemble
Do not disassemble (do not open the case). Failure to
observe this precaution can cause  re, electric
shock, or injury due to product malfunction.
CAUTION CAUTION
Do not use or store in locations that are exposed to
oil fumes, steam, high humidity, or dust. Failure to
observe this precaution can cause  re or electric
shock.
Do not leave in direct sunlight or in locations subject to
very high temperatures, such as in a closed vehicle on a
sunny day. Failure to observe this precaution can
cause  re.
Keep out of the reach of small children. This product
could cause injury in the hands of a child.
Cease use if the lens is damaged. Broken edges could
cause injury.
This warranty is valid only in JAPAN.
MCEX-11/16
1
Available lens list
The shooting distance and shooting magni cation change according to the position of the focus ring. The following
table shows reference values for when the focus ring is on the nearest side.
*1 Distance from the tip of the lens barrel to the subject (All  gures are approximate)
*2 Distance from the image sensor to the subject
Removal button
Press only when
removing
  • Page 1 1
  • Page 2 2

Fujifilm MCEX-11 / MCEX-16 取扱説明書

カテゴリ
カメラレンズ
タイプ
取扱説明書