Yealink UVC84 ユーザーガイド

タイプ
ユーザーガイド
Video Conferencing Camera
UVC84
Quick Start Guide(V1.2)
English | 简体中文
1
Package Contents
(T4×30 screw)
X 4
X 4
X 5
(1/4'' -20 UNC screw)
UVC84 7m
USB Cable
7.5m
Ethernet Cable
Power Adapter
48V/0.7A
VCR20
Remote Control
AAA
Battery×2
Cable Tie× 5
Velcro
(on the bracket)
Mounting Bracket
and Accessories
UVC84
Quick Start Guide
1. The USB cable in the UVC84 single-product package is 7m, and 2.5m in the UVC84 package of the
MVC940/MVC840/MVC640.
2. We recommend that you use the accessories provided or approved by Yealink. The use of unapproved
third-party accessories may result in poor performance.
UVC84 Installation
• Mount on top of a display
Choose the following installation method when the thickness of the TV is between 0mm and 50mm.
3M Velcro
Pay attention to the direction
of the bracket.
• Put on a Flat Surface
You can put the UVC84 on the conference table, and make sure that the angle of inclination of the
UVC84 is not more than 5 degrees to ensure proper operation.
2
• Mount on the Wall
66mm
100mm
Hole depth: 30mm
Hole diameter: 6mm
Screw specication: T4×30
Screw specication:
1/4'' -20 UNC
3M Velcro
Choose the following installation method when the thickness of the TV is between 50mm and 150mm.
3
• Mount on the Ceiling
• Mount onto a TV Mount2
Screw specication: T4×30
You need to purchase a TV Mount2 separately.
180°
Screw specication: M3×8
Screw specication:
1/4'' -20 UNC
Screw specication:
1/4'' -20 UNC
Screw specication:
1/4'' -20 UNC
Screw specication:
1/4'' -20 UNC
4
Hardware Interface Instructions
 
2
3
4
5
DC48V: connect to the power adapter.
Security slot: connect a universal security cable to the UVC84 so that you
can lock the UVC84 down.
Line Out: connect to an audio output device using an audio cable (3.5mm).
USB Port: insert DD10 to connect to CPW90.
Video Out: connect to a PC as video output.
In MVC system, connect to audio device (for example: VCM34).
In video conference system, connect to the endpoint (for example:
MeetingEye 800).
6
5
VCH3 VCH2 VCH1 Display3 Display2 Display1 Internet
5V
DC 48V
Line in Line out Video in
HDMI
PC
PoE
3&
VCH51 

7$)
UVC84 UVC84 UVC84 UVC84
CTP20
LED Indicator Instructions
LED indicators on the UVC84:
LED Status Description
Off The UVC84 is powered off.
Solid green The UVC84 is active.
Solid red The UVC84 is in sleep mode.
Flashing yellow The UVC84 is upgrading rmware.
Flashing red The UVC84 is in recovery mode.
Connect to the video conference system:
MeetingEye 800
UVC84 Connection
USB
cable
Cat5e
Microphone
Sounbar
Connect to PC:
0.6m USB
Type-C Cable
0.6m
HDMI Cable
or
Ethernet Cable
Ethernet Cable
Internet
IEEE 802.3af compliant
PoE Switch
Display×3
6
包装清单
(T4×30 screw)
X 4
X 4
X 5
(1/4'' -20 UNC screw)
UVC84 7米
USB 线
7.5 米
以太网线
电源适配器
(48V/0.7A)
VCR20
遥控器
7 号电池 ×2 束线带 ×5魔术贴
(已粘在挂架上支架配件 UVC84
快速入门指南
1. UVC84 单品包材中标配的 USB 线为 7 在 MVC940/MVC840/MVC640 的 UVC84 包材中为 2.5 米。
2. 我们推荐使用由亿联提供或经亿联认可的配件使用未经认可的第三方配件可能会导致性能的下降。
安装 UVC84
• 挂装
当电视厚度范围为 0-50mm 时进行以下步骤:
魔术贴
注意支架方向
• 平放安装
将终端摆放在水平桌面。如果桌面略有倾斜请保证倾斜角小于 5°以保证终端的摄像机云
台正常运转。
7
• 墙装
66mm
100mm
打孔深度 30mm
打孔直径 6mm
螺丝规格:T4×30
螺丝规格:
1/4''-20UNC
魔术贴
当电视厚度范围为 50-150mm 时进行以下步骤:
8
• 吊装
• 电视架安装
螺丝规格:T4×30
用户可以自行选购电视架。
180°
螺丝规格:M3×8
螺丝规格:
1/4''-20UNC
螺丝规格:
1/4''-20UNC
螺丝规格:
1/4''-20UNC
螺丝规格:
1/4''-20UNC
9
硬件接口介绍
 
2
3
4
5
电源接口 : 连接电源适配器
安全锁孔 : 将主机锁在固定位置。
音频线性输出 : 使用 3.5mm 音频接头线连接
视频输出 : 连接电脑作为视频输出
USB: 预留。
在 MVC 系统中连接音频设备例如:VCM34
在视频会议系统中连接终端(例如:MeetingEye 800)。
6
10
VCH3 VCH2 VCH1 Display3 Display2 Display1 Internet
5V
DC 48V
Line in Line out Video in
HDMI
PC
PoE
3&
VCH51 

7$)
UVC84 UVC84 UVC84 UVC84
CTP20
指示灯介绍
UVC84 指示灯介绍如下 :
指示灯状态 说明
关闭 UVC84 没有正确连接到 PC 上或未处于正常工作状态。
绿灯常亮 UVC84 处于正常工作状态。
红灯常亮 UVC84 处于休眠状态。
橙灯闪烁 UVC84 固件更新中。
红灯闪烁 UVC84 处于恢复模式。
连接会议电视终端:
MeetingEye 800
连接 UVC84
USB
线
Cat5e
麦克风
Sounbar
连接电脑:
0.6 米 USB
Type-C 线 0.6m
HDMI 线
以太网线
以太网线
网口
IEEE 802.3af 标 PoE
集线器 / 交换机
显示屏 ×3
About Yealink
Yealink (Stock Code: 300628) is a global brand that specializes in video conferencing, voice communications and collaboration
solutions with best-in-class quality, innovative technology and user-friendly experience. As one of the best providers in more than
140 countries and regions, Yealink ranks No.1 in the global market share of SIP phone shipments (Global IP Desktop Phone
Growth Excellence Leadership Award Report, Frost & Sullivan, 2019).
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for rmware downloads, product documents, FAQ, and more. For better service, we
sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD.
Web: www.yealink.com
Addr: No.1 Ling-Xia North Road, High Tech Park,
Huli District, Xiamen, Fujian, P.R.C
Copyright©2021 Yealink Inc. All rights reserved.
Regulatory Notices
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in
accordance with the operating instructions and the system environment. We are not
liable for damage or loss resulting from the use of this product, or for any claim from
a third party. We are not liable for problems with Yealink device arising from the use
of this product; we are not liable for nancial damages, lost prots, claims from third
parties, etc., arising from the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health as a result
of the presence of hazardous substances in electrical and electronic
equipment, end users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of
WEEE as unsorted municipal waste and have to collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements
of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions carefully
and observe the situation during operation.
During the process of storage, transportation, and operation, please always
keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device. Legal
rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device under
direct sunlight.
• Keep the device dry and free of dusts.
Do not place the device on or near any inammable or re-vulnerable object,
such as rubber-made materials.
Keep the device away from any heat source or bare re, such as a candle or
an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of accidental
swallowing.
Please use the accessories provided or authorized by the manufacturer only.
The power supply of the device shall meet the requirements of the input voltage
of the device. Please use the provided surge protection power socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near water,
for example, near a bathtub, washbowl, kitchen sink, wet basement or near a
swimming pool.
During a thunderstorm, stop using the device and disconnect it from the power
supply. Unplug the power plug and the Asymmetric Digital Subscriber Line
(ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.
If the device is left unused for a rather long time, disconnect it from the power
supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise or
smell, disconnect the device from the power supply, and unplug the power plug
immediately.
Contact the specied maintenance center for repair.
Do not insert any object into equipment slots that is not part of the product or
auxiliary product.
Before connecting a cable, connect the grounding cable of the device rst. Do
not disconnect the grounding cable until you disconnect all other cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IC Statement
1.This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.NMB-3(B)
2.This device meets CS03 Part V.
‘’This device meets the applicable Innovation, Science and Economic Development
Canada technical specications. / Ce produit répond à la innovation, des sciences
et de .Développement économique Canada spécications techniques applicables.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The
Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Yealink UVC84 ユーザーガイド

タイプ
ユーザーガイド

他の言語で