Hitachi H 60MEY Handling Instructions Manual
- カテゴリー
- パワーツール
- タイプ
- Handling Instructions Manual
このマニュアルも適しています
Demolition Hammer
H 60ME
•
H 60MEY
Handling instructions
Keep for future reference
English
2
3
4
○
5
○
○
n
V --S/--S
A ---/min
W
6
○ ○
○
○
○
○
○
7
8
Ⓐ
Ⓐ
Ⓑ
Ⓐ
Ⓑ
9
10
11
12
110
21
22
68
1 2
3
4
5
6
7
8
9
17
18
19
24
25
26
27
28
29
31
32
33
34
35
36
37
38
40
41
39
42
43
44
45
46
47
48
49
50
51
52
53
54
57
58
55
56
61
64
65
66
67
72
61
85
75
73
74
74
73
80
79
77
81
86
87
88
89
90
91
92
93
94
82
83
84
105
106
107
108
109
112
96
95
97
98
99
100
101
102
104
103
115
117
118
116
76
59
78
20
23
30
16
10
85
114
69
70
71
70
111
113
501
502
11
12
13
14
12
15
62
60
63
68
H60ME
13
14
15
H60MEY
110
112
69
21
22
68
1
2
3
4
5
6
7
8
9
17
18
19
24
25
26
27
28
29
31
32
33
34
35
36
37
38
40
41
39
42
43
44
45
46
47
48
49
50
51
52
53
54
57
58
55
56
61
64
65
66
67
72
61
85
75
73
74
74
73
80
79
77
81
86
87
88
89
90
91
92
93
94
82
83
84
105
106
107
108
109
122
96
95
97
98
99
100
101
102
104
103
125
127
128
126
76
59
78
20
23
30
16
10
85
124
68
70
71
70
121
123
111
115
114
118
119
116
117
120
113
501
502
11
12
13
14
12
15
62
60
63
16
17
English
18
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
CONTENTS
GENERAL POWER TOOL SAFETY WARNINGS ........................................18
DEMOLITION HAMMER SAFETY WARNINGS ..........................................20
ADDITIONAL SAFETY WARNINGS .............................................................21
SYMBOLS ....................................................................................................22
SPECIFICATIONS ........................................................................................ 22
STANDARD ACCESSORIES .......................................................................22
OPTIONAL ACCESSORIES (sold separately)..............................................23
APPLICATIONS ............................................................................................23
PRIOR TO OPERATION ...............................................................................23
HOW TO USE ...............................................................................................27
GREASE REPLACEMENT ...........................................................................28
MAINTENANCE AND INSPECTION ............................................................ 28
SERVICE PARTS LIST .................................................................................29
English
19
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool.
Do not use a power tool while you are tired or under the infl uence of drugs,
alcohol or medication.
A moment of inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/or battery pack, picking up or carrying the
tool.
Carrying power tools with your fi nger on the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
English
20
b) Do not use the power tool if the switch does not turn it on and off .
Any power tool that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may aff ect the power toolʼs
operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations diff erent from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a qualifi ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
CAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of children and infi rm persons.
DEMOLITION HAMMER SAFETY WARNINGS
1. Wear ear protectors.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Hitachi H 60MEY Handling Instructions Manual
- カテゴリー
- パワーツール
- タイプ
- Handling Instructions Manual
- このマニュアルも適しています
他の言語で
- English: Hitachi H 60MEY
関連論文
-
Hitachi CE 18DSL Handling Instructions Manual
-
Hikoki C9U2 ユーザーマニュアル
-
-
-
-
Hikoki DH38SS ユーザーマニュアル
-
-
Infocus W 6VM ユーザーマニュアル
-
-