Matrix VS-S78 取扱説明書

VERSA SERIES

VS-S78

2

3

14

24

34

44

54

ENGLISH

繁體中文

한국어

TIẾNG VIỆT





3

ENGLISH

IMPORTANT SAFETY INFORMATION

It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals, whether

they are the end user or supervising personnel on proper usage of the equipment.

It is recommended that all users of MATRIX exercise equipment be informed of the following information prior to its use.

Do not use any equipment in any way other than designed or intended by the manufacturer.

It is imperative that MATRIX equipment be used properly to avoid injury.

INSTALLATION

1. STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a stable base and properly leveled.

2. SECURING EQUIPMENT: Manufacturer recommends that all stationary MATRIX strength equipment be secured to the oor to

stabilize equipment and eliminate rocking or tipping over. This must be performed by a licensed contractor.

All anchor points must be able to withstand 750 lbs. (3.3 kN) pull-out force.

MAINTENANCE

1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use

only replacement parts supplied by your country’s local MATRIX dealer.

2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important

information. If unreadable or missing, contact your MATRIX dealer for a replacement.

3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well

as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals.

4. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualied to do

so. MATRIX dealers will provide service and maintenance training at our corporate facility upon request.

ADDITIONAL NOTES

This equipment should only be used in supervised areas where access and control is specically

regulated by the owner. It is up to the owner to determine who is allowed access to this training

equipment. The owner should consider a user’s: degree of reliability, age, experience, etc.

This training equipment meets industry standards for stability when used for its intended

purpose in accordance with the instructions provided by the manufacturer.

This equipment is for indoor use only. This training equipment is a Class S product (designed for use in a commercial

environment such as a tness facility). This training equipment is in compliance with EN ISO 20957-1 and EN 957-2.

WARNING

DEATH OR SERIOUS INJURY CAN OCCUR ON THIS

EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID

INJURY!

1. Keep children under the age of 14 away from this

strength training equipment. Teenagers must be

supervised at all times while using this

equipment.

2. This equipment is not intended for use by persons

with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the equipment by a

person responsible for their safety.

3. All warnings and instructions should be read and

proper instruction obtained prior to use. Use this

equipment for its intended purpose ONLY.

4. Inspect the machine before use. DO NOT use

machine if it appears damaged or inoperable.

5. Do not exceed weight capacity of this equipment.

6. Check to see that the selector pin is completely

inserted into the weight stack.

7. NEVER use the machine with the weight stack

pinned in an elevated position.

8. NEVER use dumbbells or other means to

incrementally increase the weight resistance. Only

use the means provided directly from the

manufacturer.

9. Injuries to health may result from incorrect or

excessive training. Cease exercise if you feel faint

or dizzy. Obtain a medical exam before beginning

an exercise program.

10. Keep body, clothing, hair, and ﬁtness accessories

free and clear of all moving parts.

11. Adjustable stops, where provided, must be used

at all times.

12. When adjusting any adjustable mechanism (stop

position, seat position, pad location, range of

motion limiter, pulley carriage, or any other type),

make certain that the adjustable mechanism is fully

engaged prior to use to prevent unintended motion.

13. Manufacturer recommends that this equipment be

secured to the ﬂoor to stabilize and eliminate

rocking or tipping over. Use a licensed contractor.

14. If equipment is NOT secured to ﬂoor: NEVER allow

resistance straps, ropes or other means to be

attached to this equipment, as this may result in

serious injury. NEVER use this equipment for

support during stretching, as this may result in

serious injury.

15. DO NOT REMOVE THIS LABEL. REPLACE IF

DAMAGED OR ILLEGIBLE.

4

ENGLISH

5

ENGLISH

PROPER USAGE

1. Do not exceed weight limits of the exercise device.

2. If applicable, set safety stops to appropriate height.

3. If applicable, adjust seat pads, leg pads, foot pads, range of motion

adjustment, or any other type of adjustment mechanisms to a comfortable

start position. Make certain that the adjusting mechanism is fully

engaged to prevent unintentional movement and to avoid injury.

4. Sit on bench (if applicable) and get into appropriate position for exercise.

5. Exercise using no more weight than you can safely lift and control.

6. In a controlled manner, perform exercise.

7. Return weight to its fully-supported start position.

WARRANTY

For North America, please visit www.matrixtness.com for warranty

information along with warranty exclusions and limitations.

MAINTENANCE CHECKLIST

ACTION FREQUENCY

Clean Upholstery

1

Daily

Inspect Cables

2

Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As Needed

Clean Grips

1

As Needed

Lubricate Guide Rods

3

As Needed

1

Upholstery & Grips should be cleaned with a mild soap

and water or a non-ammonia based cleaner.

2

Cables should be inspected for cracks or frays and immediately replaced if present.

If excessive slack exists cable should be tightened without lifting the head plate.

3

Guide rods should be lubricated with Teon based lubricant. Apply the

lubricant to a cotton cloth and then apply up and down the guide rods.

PRODUCT SPECIFICATIONS

Max User Weight 136 kg / 300 lbs.

Max Training Weight 70 kg / 155 lbs.

Product Weight 185 kg / 409 lbs.

Weight Stack 68 kg / 150 lbs.

Add-On-Weight 2.3 kg / 5 lbs. effective resistance

Overall Dimensions

(L x W x H)*

135 x 102 x 168 cm /

53 x 40 x 66”

* Ensure a minimum clearance width of 0.6 meters (24”) for access to and pas-

sage around MATRIX strength equipment. Please note, 0.91 meters (36”) is the

ADA recommended clearance width for individuals in wheelchairs.

6

TOOLS REQUIRED FOR ASSEMBLY (not included)

3MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench

4MM L-Shaped Allen Wrench Phillips Screwdriver

5MM L-Shaped Allen Wrench 8MM Open-End Wrench

6MM L-Shaped Allen Wrench 17MM Open-End Wrench

8MM L-Shaped Allen Wrench Guide Rod Lubrication

If any items are missing please contact your country’s local MATRIX dealer for assistance.

0 mm 10 20 30 40 50 60 70 80 90 100 110 120 130

UNPACKING

Thank you for purchasing a MATRIX Fitness product. It is inspected before it is packaged. It is

shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly,

conrm all the components by matching them with the exploded diagrams. Carefully unpack the

unit from this box and dispose of the packing materials in accordance with your local laws. Exercise

device must be assembled by a trained assembly team or be pre-assembled prior to delivery.

CAUTION

To avoid injury to yourself and prevent damage to the frame components, be sure to have proper

assistance removing the frame pieces from this box. Please be sure to install the equipment

on a stable base, and properly level the machine. Ensure a minimum clearance width of 0.6

meters (24”) for access to and passage around MATRIX strength equipment. Please note, 0.91

meters (36”) is the ADA recommended clearance width for individuals in wheelchairs.

VS-S78 TRAINING AREA

1.78 M

(70”)

1.55 M

(60.7”)

FREE AREA

0.6 M (2 FT)

WIDE PATH

ENGLISH

7

ENGLISH

A

B

C

D

E

1

Step 1 Hardware

Description Qty

A

B

C

D

E

Bolt (M10x125L)

Arc Washer (Φ10.2)

Nut (M10)

Bolt (M10x20L)

Flat Washer (M10)

4

8

4

6

Torque Value

77 Nm / 57 ft-lb

2

G

D

E

F

Step 2 Hardware

Description Qty

D

E

F

G

Bolt (M10x20L)

Flat Washer (M10)

Bolt (M8x25L)

Flat Washer (M8)

4

2

Torque Value

77 Nm / 57 ft-lb

Do not fully tighten frame connectors until

assembly is complete. Vibra-Tite 135 Red Gel

or equivalent must be used on all fasteners

that are not assembled with Nylock Nuts.

8

G

I

H

3 4

Step 3 Hardware

Description Qty

H

G

I

Bolt (M8x20L)

Flat Washer (M8)

Nylock Nut (M8)

8

2

Torque Value

77 Nm / 57 ft-lb

H

Step 4 Hardware

Description Qty

H Bolt (M8x20L) 3

Torque Value

77 Nm / 57 ft-lb

ENGLISH

9

E

D

5 6

Step 5 Hardware

Description Qty

D

E

Bolt (M10x20L)

Flat Washer (M10)

6

Torque Value

10 Nm / 7 ft-lb

J

E

1

Step 2 Hardware

Description Qty

E

J

Flat Washer (M10)

Bolt (M10x25L)

4

Torque Value

10 Nm / 7 ft-lb

Remove limit pin (1) before installing

pad assembly. Reinstall limit pin (1)

after installing pad assembly.

ENGLISH

10

K

E

2

7 8

J

L

N

M

Step 7 Hardware

Description Qty

K

E

Bolt (M10x55L)

Flat Washer (M10)

1

Torque Value:

15 Nm / 11 ft-lb

Step 8 Hardware

Description Qty

J

L

M

N

Bolt (M10x25L)

Flat Washer (M10 Φ38mm)

Fixed Plug

Set Screw (M10x10L)

1

Torque Value:

15 Nm / 11 ft-lb

Install cable (2) before

installing pulley cover.

ENGLISH

11

9 10

F

G

Step 10 Hardware

Description Qty

F

G

Bolt (M8x25L)

Flat Washer (M8)

4

Torque Value

77 Nm / 57 ft-lb

ENGLISH

12

11

O

P

ASSEMBLY COMPLETE!

Premium Kit (optional)

Step 11 Hardware

Description Qty

O

P

Bolt (M8x60L)

Bolt (M8x35L)

4

2

Torque Values

O

P

25 Nm / 18 ft-lb

15 Nm / 11 ft-lb

For more info, see weight stack

assembly manual.

ENGLISH

13

14

重要安全資訊

MATRIX 產品買主應負責確保已充分教導最終使用者或監督人員器材的正確使用方式。

建議所有 MATRIX 健身器材使用者在使用前瞭解下列資訊。

所有器材的使用方式需以製造商的設計原理或原始用途為主，不可擅自更改。請務必遵行正確的 MATRIX 器材使用方式，以避免造成傷害。

安裝

1. 穩固的平面：MATRIX 健身器材必須安裝於穩固且平坦的表面上。

2. 固定器材：製造商建議將所有固定式 MATRIX 重量設備固定於地面，以提高穩定性並避免晃動或傾倒。必須由合格承包商進行安裝。

所有固定點的鎖固扭力須達 750 磅 (3.3 kN)。

保養

1. 任何器材一旦損壞或零件磨損/破損，一律不得繼續使用。請使用您所在國家當地 MATRIX 經銷商所販售的替換零件。

2. 保養標籤和貼標：請勿因任何原因撕除標籤。標籤內含重要資訊。如標籤模糊不清或遺失，請聯絡 MATRIX 經銷商並要求重新張貼。

3. 保養所有器材：預防性保養是保持器材功能正常及善盡安全責任的關鍵。請定期檢查器材。

4. 確認負責調整或保養/維修器材的人員均為合格人員。MATRIX 經銷商可應要求提供維修及保養訓練。

其他注意事項

本器材必須在監督人員可管控的區域內使用。器材所有人有權決定哪些人可使用本訓練器材。器材所有人應考量使用者的：可靠程度、

年齡、經驗等等。

如遵行製造商提供之說明並按照其設計用途使用，本訓練器材符合業界規範的穩定性標準。

本器材僅供室內使用。本訓練器材屬 S 類產品 (專用於健身房之類的商務環境)。本訓練器材符合 EN ISO 20957-1 及 EN 957-2 的規定。

警告

本器材使用不當可能導致死亡或嚴重人身

傷害。請遵行以下注意事項，避免受傷！

1. 未滿 14 歲的兒童請勿接近本重量訓練器

材。青少年須在成人全程監督下使用本

器材。

2. 本器材不適用於體能、知覺或精神機能不

佳或欠缺經驗及知識的人士；如欲使用，

必須在他人監督下進行，且須由可負責其

人身安全者指導器材用途及使用方式。

3. 使用前請詳閱所有警告及說明，並接受正

確的指導。請遵循本器材的用途。

4. 使用前請先仔細檢查。切勿使用已損壞或

無法操作的器材。

5. 使用本器材時，不可超過承重限制。

6. 檢查確認選擇桿插鞘完全插入槓片架內。

7. 若槓片架固定於高處，切勿使用本機器。

8. 切勿利用啞鈴或其他方式增加槓片阻力。

只能按照製造商提供的方式進行。

9. 訓練方式不正確或訓練過度皆有可能損

礙健康。若感覺昏厥或暈眩，請停止訓練。

開始進行訓練課程之前，請接受體檢。

10.

身體、衣物、頭髮及健身配件皆須與所有

活動零件保持距離。

11.

若有可調節限制器，務必全程使用。

12.

當您調整任何可調節裝置 (限制器位置、

座椅位置、踏墊位置、移動範圍限制裝置、

滑輪滑動架或任何其他類型的裝置)，請

務必先確認可調節裝置完全鎖上再使用，

避免裝置突然移動。

13.

製造商建議將本器材固定於地面，以提高

穩定性並避免晃動或傾覆。請選擇合格承

包商。

14.

若未將本器材固定於地面：一律禁止將抗

力帶、抗力繩或其他類似配件綁附於本器

材，否則可能會導致嚴重人身傷害。請勿

以本器材做為伸展運動的支撐點，否則可

能會導致嚴重人身傷害。

15.

請勿撕除此標籤。若標籤破損或模糊不

清，請更換新標籤。

繁體中文

15

將胸前軟墊調整至

舒適的高度

開始

完成

臀大肌訓練

伸展

臀大肌訓練

繁體中文

16

正確的使用方式

1. 不可超出訓練器材的重量限制。

2. 若有安全止動器，請將安全止動器調整至適當的高度。

3. 儘可能將座墊、腿墊、腳墊、活動範圍調整裝置或任何其他類型的調整裝置，調整到舒

適的開始位置。確認調整裝置完全鎖緊，避免突然移動或造成傷害。

4. 若有訓練椅，請坐在訓練椅上並調整至適當的訓練位置。

5. 訓練時的重量不可超過您可安全舉重及控制的範圍。

6. 請在適度的控制範圍內進行訓練。

7. 將槓片放回支撐槓片的開始位置。

保固

如果您在北美，請至 www.matrixtness.com 查詢保固資訊，以及保固的例外和限

制條款。

產品規格

使用者體重承載上限

136 公斤 / 300 磅

訓練重量承載上限

70 公斤 / 155 磅

產品重量

185 公斤 / 409 磅

重量片組

68 公斤 / 150 磅

增重重量片

有效阻力 2.3 公斤 / 5 磅

總尺寸

(長 x 寬 x 高)*

135 x 102 x 168 公分 /

53 x 40 x 66 英吋

* MATRIX 重量器材周圍務必保留至少 0.6 公尺 (24 英吋) 的寬度，以利使用及通行。

請注意，美國身心障礙法案 (ADA) 建議的輪椅通行寬度是 0.91 公尺 (36 英吋)。

保養檢查清單

措施頻率

清潔墊子

1

每天一次

檢查鋼索

2

每天一次

清潔導桿每月一次

檢查五金是否鬆動每月一次

檢查機架每半年一次

清潔器材隨時視需要

清潔握把

1

隨時視需要

潤滑導桿

3

隨時視需要

1

請以溫和的肥皂和清水或不含氨成份的清潔劑清潔墊子與握把。

2

檢查鋼索是否有破裂或磨損情形，若有應立即更換。若鋼索過鬆，應在不抬起頂板的情況

下拉緊鋼索。

3

請以鐵弗龍潤滑劑潤滑導桿。以棉布沾取潤滑劑後，再上下擦拭導桿。

繁體中文

17

組裝所需的工具 (非隨附)

3 mm L 形六角扳手 10 mm L 形六角扳手

4 mm L 形六角扳手

十字螺絲起子

5 mm L 形六角扳手 8 mm 開口扳手

6 mm L 形六角扳手 17 mm 開口扳手

8 mm L 形六角扳手

導桿潤滑劑

如缺少任何物品，請向您所在國家的當地 MATRIX 經銷商求助。

0 mm 10 20 30 40 50 60 70 80 90 100 110 120 130

開箱

感謝您購買 MATRIX Fitness 產品。本產品包裝前均經檢查。為減少器材包裝體積，本產品拆分多件運送。進行組裝

前，請先比對各零組件與圖表內容是否相符。小心地將器材從本包裝箱取出後，請依照當地法規妥善棄置包裝材料。運

動裝置必須由經過訓練的組裝團隊進行組裝，或者在送貨前已經預先組裝。

注意

為避免受傷及防範破壞器材零組件，請務必請他人協助將器材零組件從包裝箱內取出。請務必將器材安裝在穩固的平面

上，並使器材保持水平。MATRIX 重量器材周圍務必保留至少 0.6 公尺 (24 英吋) 的寬度，以利使用及通行。請注意，

美國身心障礙法案 (ADA) 建議的輪椅通行寬度是 0.91 公尺 (36 英吋)。

VS-S78 訓練區域

1.78 公尺

(70 英吋)

1.55 公尺

(60.7 英吋)

活動區域

0.6 公尺 (2 英呎)

寬幅

繁體中文

18

A

B

C

D

E

1

步驟 1，五金包

說明數量

A

B

C

D

E

螺絲 (M10x125L)

弧形墊圈 (Φ10.2)

螺帽 (M10)

螺絲 (M10x20L)

平墊圈 (M10)

4

8

4

6

扭力值

77 Nm/57 ft-lb

2

G

D

E

F

步驟 2，五金包

說明數量

D

E

F

G

螺絲 (M10x20L)

平墊圈 (M10)

螺絲 (M8x25L)

平墊圈 (M8)

4

2

扭力值

77 Nm/57 ft-lb

組裝完成之前，請勿將機架螺絲鎖緊。若未使用

尼龍防鬆螺帽組裝，則需使用 Vibra-Tite 135 紅

色螺絲膠或同級零件組裝。

繁體中文

19

G

I

H

3 4

步驟 3，五金包

說明數量

H

G

I

螺絲 (M8x20L)

平墊圈 (M8)

尼龍防鬆螺帽 (M8)

8

2

扭力值

77 Nm/57 ft-lb

H

步驟 4，五金包

說明數量

H 螺絲 (M8x20L) 3

扭力值

77 Nm/57 ft-lb

繁體中文

20

E

D

5 6

步驟 5，五金包

說明數量

D

E

螺絲 (M10x20L)

平墊圈 (M10)

6

扭力值

10 Nm/7 ft-lb

J

E

1

步驟 2，五金包

說明數量

E

J

平墊圈 (M10)

螺絲 (M10x25L)

4

扭力值

10 Nm/7 ft-lb

安裝靠墊組件之前，請先拆下插銷 (1)。安裝靠墊

組件之後再裝回插銷 (1)。

繁體中文

ページを読み込んでいます...

Matrix VS-S78 取扱説明書

関連論文