Dell OptiPlex 210L クイックスタートガイド

www.dell.com | support.dell.com

Dell™ OptiPlex™ 210L

Quick Reference Guide

Models DCSM, DCNE

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft

®

Windows

®

operating systems are not applicable.

The

Quick Reference Guide

,

Drivers and Utilities

CD, and operating system media are optional and may not ship

with all computers.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the Glossary in the

User’s Guide

.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, OptiPlex, and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks

of Microsoft Corporation; Intel and Pentium are registered trademarks of Intel Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Models DCSM, DCNE

September 2006 P/N FD398 Rev. A01

Contents 3

Contents

Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

System Views

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mini Tower Computer — Front View

. . . . . . . . . . . . . . . . . . . . . 8

Mini Tower Computer — Back View

. . . . . . . . . . . . . . . . . . . . 10

Mini Tower Computer — Back-Panel Connectors

. . . . . . . . . . . . . 11

Desktop Computer — Front View

. . . . . . . . . . . . . . . . . . . . . . 12

Desktop Computer — Back View

. . . . . . . . . . . . . . . . . . . . . . 14

Desktop Computer — Back-Panel Connectors

. . . . . . . . . . . . . . 14

Removing the Computer Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before You Begin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Turning Off Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . 16

Mini Tower Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Desktop Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Inside Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Mini Tower Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Desktop Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setting Up Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Solving Problems

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Dell Diagnostics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

System Lights

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Diagnostic Lights

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Beep Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Resolving Software and Hardware Incompatibilities

. . . . . . . . . . . 36

Using Microsoft Windows XP System Restore

. . . . . . . . . . . . . . . 36

Reinstalling Microsoft Windows XP

. . . . . . . . . . . . . . . . . . . . 37

Using the Drivers and Utilities CD

. . . . . . . . . . . . . . . . . . . . . . . . 40

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

4 Contents

Quick Reference Guide 5

Finding Information

NOTE: Some features may not be available for your computer or in certain countries.

NOTE: Additional information may ship with your computer.

What Are You Looking For? Find It Here

• A diagnostic program for my computer

• Drivers for my computer

• My computer documentation

• My device documentation

• Desktop System Software (DSS)

Drivers and Utilities CD (also known as ResourceCD)

Documentation and drivers are already installed on your

computer. You can use the CD to run the

Dell Diagnostics

or

access your documentation. (see "Dell Diagnostics" on page 28).

Readme files may be included on

your CD to provide last-minute

updates about technical changes to

your computer or advanced

technical-reference material for

technicians or experienced users.

NOTE: Drivers and documentation

updates can be found at

support.dell.com.

NOTE: The Drivers and Utilities CD

is optional and may not ship with

your computer.

• Warranty information

• Terms and Conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

Dell™ Product Information Guide

• How to remove and replace parts

• Specifications

• How to configure system settings

• How to troubleshoot and solve problems

User’s Guide

Microsoft

®

Windows

®

XP Help and Support Center

1

Click the Start button, then click Help and Support.

2

Click Dell User and System Guides, then click System Guides.

3

Click Dell Optiplex User's Guide.

The User’s Guide is also available on the optional

Drivers and

Utilities

CD (

Resource

CD)

.

6 Quick Reference Guide

• Service Tag and Express Service Code

• Microsoft Windows License Label

Service Tag and Microsoft Windows License

These labels are located on your computer.

• Use the Service Tag to identify

your computer when you use

support.dell.com

or contact

technical support.

• Enter the Express Service

Code to direct your call when

contacting technical support.

• Solutions — Troubleshooting hints and tips,

articles from technicians, online courses, and

frequently asked questions

• Community — Online discussion with other

Dell customers

• Upgrades — Upgrade information for

components, such as memory, the hard drive,

and the operating system

• Customer Care — Contact information,

service call and order status, warranty, and

repair information

• Service and support — Service call status and

support history, service contract, and online

discussions with technical support

• Reference — Computer documentation,

details on my computer configuration,

product specifications, and white papers

• Downloads — Certified drivers, patches, and

software updates

• Desktop System Software (DSS) — If you

reinstall the operating system for your

computer, you should also reinstall the DSS

utility. DSS provides critical updates for your

operating system and support for Dell

3.5-inch USB floppy drives, Intel

®

Pentium

®

M processors, optical drives, and

USB devices. DSS is necessary for correct

operation of your Dell computer. The

software automatically detects your computer

and operating system and installs the updates

appropriate for your configuration.

Dell Support Website — support.dell.com

NOTE: Select your region to view the appropriate support site.

NOTE: Corporate, government, and education customers can also

use the customized Dell Premier Support website at

premier.support.dell.com. The website may not be available in

all regions.

What Are You Looking For? Find It Here

Quick Reference Guide 7

• How to use Windows XP

• Documentation for my computer

• Documentation for devices (such as a

modem)

Windows Help and Support Center

1

Click the

Start

button and click

Help and Support

.

2

Type a word or phrase that describes your problem and click the

arrow icon.

3

Click the topic that describes your problem.

4

Follow the instructions on the screen.

• How to reinstall my operating system

Operating System CD

The operating system is already installed on your computer.

To reinstall your operating system, use the Operating System CD

(see "Reinstalling Microsoft Windows XP" on page 37 for

instructions).

After you reinstall your operating

system, use the optional Drivers and

Utilities CD (ResourceCD) to

reinstall drivers for the devices that

came with your computer.

Your operating system product key

label is located on your computer.

NOTE: The color of your CD varies

based on the operating system you

ordered.

NOTE: The Operating System CD is

optional and may not ship with your

computer.

What Are You Looking For? Find It Here

8 Quick Reference Guide

System Views

Mini Tower Computer — Front View

1234

3

8

6

7

2

1

5

4

Quick Reference Guide 9

1 CD/DVD drive

Insert a CD or DVD (if applicable) into this drive.

2 floppy drive

Insert a floppy disk into this drive.

3 hard-drive activity light

This light flickers when the hard drive is in use.

4 USB 2.0 connectors (2) Use the USB connectors on the front of the computer for devices that you

connect occasionally, such as joysticks or cameras, or for bootable USB devices.

It is recommended that you use the USB connectors on the back of the computer

for devices that typically remain connected, such as printers and keyboards.

5 diagnostic lights

Use the lights to help you troubleshoot a computer problem based on the diagnostic

code (for more information, see "Diagnostic Lights" on page 32).

6 power button

Press this button to turn on the computer.

NOTICE: To avoid losing data, do not turn off the computer by pressing the

power button for 6 seconds or longer. Instead, perform an operating system

shutdown.

NOTICE: If your operating system has ACPI enabled, when you press the

power button the computer will perform an operating system shutdown.

7 power light The power light illuminates and blinks or remains solid to indicate different

operating states:

• No light — The computer is turned off.

• Steady green — The computer is in a normal operating state.

• Blinking green — The computer is in a power-saving mode.

• Blinking or solid amber — The computer is receiving electrical power, but an

internal power problem might exist. See "Power Problems" in your online

User’s Guide.

To exit from a power-saving mode, press the power button or use the keyboard or

the mouse if it is configured as a wake device in the Windows Device Manager.

For more information about sleep modes and exiting from a power-saving mode,

see

your online User’s Guide.

For a description of light codes that can help you troubleshoot problems with your

computer, see "System Lights" on page 31.

8 headphone connector Use the headphone connector to attach headphones and most kinds of speakers.

10 Quick Reference Guide

Mini Tower Computer — Back View

1

cover release latch This latch allows you to open the computer cover.

2

padlock ring Insert a padlock to lock the computer cover.

3 voltage selection switch Your computer is equipped with a manual voltage-selection switch.

To avoid damaging a computer with a manual voltage-selection switch, set the

switch to the voltage that most closely matches the AC power available in your

location.

NOTICE: In Japan, the voltage-selection switch must be set to 115-V.

Also, ensure that your monitor and attached devices are electrically rated to

operate with the AC power available in your location.

4

3

5

6

2

1

Quick Reference Guide 11

Mini Tower Computer — Back-Panel Connectors

4 power connector Insert the power cable into this connector.

5 back-panel connectors Plug serial, USB, and other devices into the appropriate connector.

6 card slots Access connectors for any installed PCI and PCI Express cards.

1

parallel connector Connect a parallel device, such as a printer, to the parallel connector. If you have a

USB printer, plug it into a USB connector.

NOTE: The integrated parallel connector is automatically disabled if the computer

detects an installed card containing a parallel connector configured to the same

address. For more information, see your online User’s Guide.

2

link integrity light • Green — A good connection exists between a 10-Mbps network and the computer.

• Orange — A good connection exists between a 100-Mbps network and the

computer.

• Off — The computer is not detecting a physical connection to the network.

3

network adapter

connector

To attach your computer to a network or broadband device, connect one end of a

network cable to either a network jack or your network or broadband device.

Connect the other end of the network cable to the network adapter connector on

the back panel of your computer. A click indicates that the network cable has been

securely attached.

NOTE: Do not plug a telephone cable into the network connector.

On computers with a network adapter card, use the connector on the card.

It is recommended that you use Category 5 wiring and connectors for your network.

If you must use Category 3 wiring, force the network speed to 10 Mbps to ensure

reliable operation.

4

network activity light This light flashes yellow when the computer is transmitting or receiving network

data. A high volume of network traffic may make this light appear to be in a steady

"on" state.

13

10

9

8

5

6

7

24

12 Quick Reference Guide

Desktop Computer — Front View

5

line-in connector Use the blue line-in connector to attach a record/playback device such as a cassette

player, CD player, or VCR.

On computers with a sound card, use the connector on the card.

6

line-out connector Use the green line-out connector to attach headphones and most speakers with

integrated amplifiers.

On computers with a sound card, use the connector on the card.

7

microphone connector Use the pink microphone connector to attach a personal computer microphone for

voice or musical input into a sound or telephony program.

On computers with a sound card, the microphone connector is on the card.

8

USB 2.0 connectors (4) Use the back USB connectors for devices that typically remain connected, such as

printers and keyboards.

9

video connector Plug the cable from your VGA-compatible monitor into the blue connector.

NOTE: If you purchased an optional graphics card, this connector will be covered

by a cap. Connect your monitor to the connector on the graphics card. Do not

remove the cap.

NOTE: If you are using a graphics card that supports dual monitors, use the y-cable

that came with your computer.

10

serial connector Connect a serial device, such as a handheld device, to the serial port. The default

designation is COM1 for serial connector 1.

For more information, see your online

User’s Guide

.

1

2

3

4

78

3

5

1

46

9

2

Quick Reference Guide 13

1 USB 2.0 connectors (2) Use the USB connectors on the front of the computer for devices that you

connect occasionally, such as joysticks or cameras, or for bootable USB devices

(see your online User’s Guide for more information about booting to a USB device).

It is recommended that you use the USB connectors on the back panel for

devices that typically remain connected, such as printers and keyboards.

2 hard-drive activity light This light flickers when the hard drive is being accessed.

3 power button Press this button to turn on the computer.

NOTICE: To avoid losing data, do not turn off the computer by pressing the

power button for 6 seconds or longer. Instead, perform an operating system

shutdown.

NOTICE: If your operating system has ACPI enabled, when you press the

power button the computer will perform an operating system shutdown.

4 Dell badge This badge can be rotated to match the orientation of your computer. To rotate

the badge, place your fingers around the outside of the badge, press firmly, and

turn the badge. You can also rotate the badge using the slot provided near the

bottom of the badge.

5 power light The power light illuminates and blinks or remains solid to indicate different

operating states:

• No light — The computer is turned off.

• Steady green — The computer is in a normal operating state.

• Blinking green — The computer is in a power-saving mode.

• Blinking or solid amber — The computer is receiving electrical power, but an

internal power problem might exist. See "Power Problems" in your online

User’s Guide.

To exit from a power-saving mode, press the power button or use the keyboard or

the mouse if it is configured as a wake device in the Windows Device Manager.

For a description of light codes that can help you troubleshoot problems with

your computer see "System Lights" on page 31.

6 diagnostic lights Use the lights to help you troubleshoot a computer problem based on the

diagnostic code. For more information, see "Diagnostic Lights" on page 32.

7 headphone connector Use the headphone connector to attach headphones and most kinds of speakers.

8 floppy drive Insert a floppy disk into this drive.

9 CD/DVD drive Insert a CD or DVD (if applicable) into this drive.

14 Quick Reference Guide

Desktop Computer — Back View

Desktop Computer — Back-Panel Connectors

1 card slots Access connectors for any installed PCI and PCI Express Cards.

2 back-panel connectors Plug serial, USB, and other devices into the appropriate connector.

3 power connector Insert the power cable into this connector.

4 voltage selection switch Your computer is equipped with a manual voltage-selection switch.

To avoid damaging a computer with a manual voltage-selection switch, set the

switch to the voltage that most closely matches the AC power available in your

location.

NOTICE: In Japan, the voltage-selection switch must be set to 115-V.

Also, ensure that your monitor and attached devices are electrically rated to

operate with the AC power available in your location.

5 padlock ring Insert a padlock to lock the computer cover.

6 cover release latch Use this latch to open the computer cover.

5

1

2 3 4 6

13

10 9 8

5

6

7

24

Quick Reference Guide 15

1

parallel connector Connect a parallel device, such as a printer, to the parallel connector. If you have a

USB printer, plug it into a USB connector.

NOTE: The integrated parallel connector is automatically disabled if the computer

detects an installed card containing a parallel connector configured to the same

address. For more information, see your online User’s Guide.

2

link integrity light • Green — A good connection exists between a 10-Mbps network and the

computer.

• Orange — A good connection exists between a 100-Mbps network and the

computer.

• Off — The computer is not detecting a physical connection to the network.

3

network adapter

connector

To attach your computer to a network or broadband device, connect one end of a

network cable to either a network jack or your network or broadband device.

Connect the other end of the network cable to the network adapter connector on

the back panel of your computer. A click indicates that the network cable has been

securely attached.

NOTE: Do not plug a telephone cable into the network connector.

On computers with a network adapter card, use the connector on the card.

It is recommended that you use Category 5 wiring and connectors for your network.

If you must use Category 3 wiring, force the network speed to 10 Mbps to ensure

reliable operation.

4

network activity light This light flashes yellow when the computer is transmitting or receiving network

data. A high volume of network traffic may make this light appear to be in a steady

"on" state.

5

line-in connector Use the blue line-in connector to attach a record/playback device such as a cassette

player, CD player, or VCR.

On computers with a sound card, use the connector on the card.

6

line-out connector Use the green line-out connector to attach headphones and most speakers with

integrated amplifiers.

On computers with a sound card, use the connector on the card.

7

microphone connector Use the pink microphone connector to attach a personal computer microphone for

voice or musical input into a sound or telephony program.

On computers with a sound card, the microphone connector is on the card.

16 Quick Reference Guide

Removing the Computer Cover

Before You Begin

This chapter provides procedures for removing and installing the components in your computer. Unless

otherwise noted, each procedure assumes that the following conditions exist:

• You have performed the steps in “Turning Off Your Computer” on page 16 and "Before Working Inside

Your Computer" on page 16.

• You have read the safety information in your Dell™

Product Information Guide.

Turning Off Your Computer

NOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn off

your computer.

1

Shut down the operating system:

a

Save and close any open files, exit any open programs, click the

Start

button, and then click

Turn Off Computer

.

b

In the

Turn off computer

window, click

Turn off

.

The computer turns off after the operating system shutdown process finishes.

2

Ensure that the computer and any attached devices are turned off. If your computer and attached

devices did not automatically turn off when you shut down your operating system, turn them off now.

Before Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential damage and to help ensure

your own personal safety.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

8

USB 2.0 connectors (4) Use the back USB connectors for devices that typically remain connected, such as

printers and keyboards.

9

video connector Plug the cable from your VGA-compatible monitor into the blue connector.

NOTE: If you purchased an optional graphics card, this connector will be covered by

a cap. Connect your monitor to the connector on the graphics card. Do not remove

the cap.

NOTE: If you are using a graphics card that supports dual monitors, use the y-cable

that came with your computer.

10

serial connector Connect a serial device, such as a handheld device, to the serial port. The default

designation is COM1 for serial connector 1.

For more information, see your online

User’s Guide

.

Quick Reference Guide 17

CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a

card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.

NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing

that is not authorized by Dell is not covered by your warranty.

NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself.

Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking

tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any

connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.

To avoid damaging the computer, perform the following steps before you begin working inside the computer.

1

Turn off your computer.

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the

network wall jack.

2

Disconnect any telephone or telecommunication lines from the computer.

3

Disconnect your computer and all attached devices from their electrical outlets, and then press the

power button to ground the system board.

4

Remove the cable cover, if it is attached.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the cover.

5

Remove the computer cover:

• Remove the Mini Computer cover (see "Mini Tower Computer" on page 17).

• Remove the Desktop Computer cover (see "Desktop Computer" on page 23).

NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,

such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to

dissipate any static electricity that could harm internal components.

Mini Tower Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the computer cover.

1

Follow the procedures in "Before You Begin" on page 37.

2

Lay the computer on its side.

3

Slide the cover release latch back as you lift the cover.

4

Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage points.

5

Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.

18 Quick Reference Guide

1 security cable slot

2 cover release latch

3 padlock ring

2

1

3

Quick Reference Guide 19

Desktop Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the computer cover.

1

Follow the procedures in "Before You Begin" on page 37.

2

If you have installed a padlock through the padlock ring on the back panel, remove the padlock.

3

Slide the cover release latch back as you lift the cover.

4

Pivot the cover up using the hinge tabs as leverage points.

5

Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.

1

security cable slot

2

cover release latch

3

padlock ring

2

1

3

20 Quick Reference Guide

Inside Your Computer

Mini Tower Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the

Product Information Guide.

CAUTION: To avoid electrical shock, always unplug your computer from the electrical outlet before removing the

computer cover.

NOTICE: Be careful when opening the computer cover to ensure that you do not accidentally disconnect cables

from the system board.

1 CD/DVD drive 5 system board

2 floppy drive 6 heat sink assembly

3 power supply 7 hard drive

4 chassis manual voltage-

selection switch

1

3

5

4

7

2

6

ページが読み込まれています...

Dell OptiPlex 210L クイックスタートガイド

Dell OptiPlex 210L クイックスタートガイド

他の言語で

関連論文