Ⅲ.Description Of First Administrator’ s Fingerprint Record
1.Long press
sensor 3
seconds
2.Left your finger
when blue light
flash
3.Start record
the fingerprint
when green
light flash
4.Record 10 times
with the same finger,
and the blue light and
green light flashes
5.It records unsuccessful
when red light flash
5.It records successful
when blue light flash
6.Total of 10 times of collection
was successful, with a loud
sound "Di" ,and green light
flash continuously,the
administrator's fingerprint was
recorded successfully.
Ⅳ.Number 2 to 10 Fingerprint Recording Instructions
1.Long press
sensor 3
seconds
2.Administrator
authorize fingerprint
when blue light flash
continuously.
3.Start record the
fingerprint when
green light flash
4.Record 10 times
with the same finger,
and the blue light and
green light flashes
5.It records unsuccessful
when red light flash
5.It records successful
when blue light flash
6.Total of 10 times of collection
was successful, with a loud
sound "di" ,and green light flash
continuously, the fingerprint was
recorded successfully.
Ⅴ.Description Of Delete Fingerprint
1.Long press
sensor 10
seconds
2.Administrator
authorize fingerprint
when red light flash
continuously
3.The fingerprint was
deleted successfully
when green light flash
continuously and sound
continuously
Remarks:
Only the administrator can delete the fingerprint and delete all the fingerprints at once.
Ⅰ.USB Interface:
The product is charged by USB.
Please fully charge the product
for the first time.
Components:
1.USB Port 2.Fingerprint Reader
3.LED Light 4.Lock Beam
Ⅱ.Indicator
Use 3-color indicator. Different indicator represents
different devices and status.
Please check the details as below chart:
Indicator status Function
Low power
Charging
Full charged
Green light flash
Green light always on
Blue light always on
Green light flash
Red light always on
Red light flash
Red light flash
Red light always on
Lights off
Fingerprint collection mode
Successful to collect
fingerprint
Administrator fingerprint
authorization
Unlocked successfully
Delete fingerprint mode
Failed to collect fingerprint
Remarks:
1. The first and second fingerprints are the administrator fingerprint by default.
2. Collecting the second to tenth fingerprints requires administrator fingerprint authorization.
When the voltage ≤3.5V, the red indicator flash fast for 15s. If keep in the status of low batter, it will alarming per minute.
Support 360 degree angel
fingerprint recognize
Resolution: 508DPI
ESD: +/-12kV air, +/-8kV contact
FRR: <1%
FAR: <0.002%
Recognize time: <300mS
Battery: 3.7V 300mAh
Charger: 5V 1A
Ⅵ.Specifications
Ⅶ.Low voltage
指纹锁
FINGERPRINT LOCK
Fingerprint
2 Years
Water Resistant
1
2
3
4