Dell PowerEdge M600 クイックスタートガイド

Dell™ PowerEdge™

M905, M805, M605, and M600

Getting Started

With Your System

系统使用入门

はじめに

시스템시작하기

Dell™ PowerEdge™

M905, M805, M605, and M600

Getting Started

With Your System

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly

forbidden.

Trademarks used in this text: Dell, the DELL logo, and Dell OpenManage are trademarks of Dell Inc.;

Microsoft, Windows, and Windows Server are either trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries; AMD and AMD Opteron are trademarks of

Advanced Micro Devices, Inc.; Intel and Xeon are registered trademarks of Intel Corporation; SUSE

is a registered trademark of Novell, Inc.; Red Hat and Enterprise Linux are registered trademarks of

Red Hat, Inc.; VMware is a registered trademarks of VMware, Inc. in the United States and/or other

jurisdictions.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Model BMX01

May 2008 P/N T550C Rev. A00

Getting Started With Your System 3

System Features

This section describes the major hardware and software features of your

system. It also provides information about other documents you may need

when setting up your system and how to obtain technical assistance.

System Enclosure Features

The M1000e system enclosure (chassis) includes the following features:

Scalability Features

• Support for up to 16 half-height or 8 full-height blades (server modules).

• Support for three layers of I/O fabric, selectable between combinations

of Ethernet, Infiniband, and Fibre Channel modules.

Up to six I/O modules may be installed in the enclosure, chosen from Fibre

Channel switches, Fibre Channel passthroughs, Infiniband switches,

Ethernet switches, and Ethernet passthrough modules.

Reliability Features

• Nine redundant, hot-pluggable system fan modules.

• Three 2360-watt, hot-pluggable power supplies and three power supply

blanks, or six 2360-watt, hot-pluggable power supplies. (Three power

supplies provide power to the system; adding three additional power

supplies provides 3+3 redundancy.)

NOTICE: Power supplies can only connect to a power distribution unit (PDU).

They cannot connect directly to an electrical outlet.

NOTICE: The system enclosure requires a 200-240V power source.

4 Getting Started With Your System

Systems Management Features

• A Chassis Management Controller (CMC), which provides several

essential systems management features:

– Enclosure-level power management and thermal management:

• The CMC monitors system power requirements and supports the

optional Dynamic Power Supply Engagement mode so that the

CMC can enable or place power supplies in standby dynamically,

depending on load and redundancy requirements, to improve

power efficiency.

• The CMC reports real-time power consumption.

• The CMC supports an optional power ceiling, which will either

trigger an alert or actions to keep the enclosure power

consumption under the predefined ceiling.

• The CMC monitors and controls cooling fans based on actual

ambient and internal temperature measurements.

– The CMC provides comprehensive enclosure inventory and

status/error reporting.

– The CMC allows centralized configuration of the following settings:

• The CMC’s network and security settings

• Power redundancy and power ceiling settings

• I/O switches and iDRAC network settings

• First boot device on the blades

– The CMC will check I/O fabric consistency between the I/O modules

and blades and will disable system components if necessary to protect

the system hardware.

– User access security.

– An SD card slot on the CMC card supports an optional persistent

WWN/MAC feature that allows slot-based WWN/MACs for the

blades, simplifying blade installation and replacement.

Getting Started With Your System 5

The CMC has two Ethernet ports. "Gb1" is used to connect to the external

management network. "Stack" allows CMCs in adjacent enclosures to be

daisy-chained. A 24-port Ethernet switch provides internal 100-Mb

communication with the blades, I/O modules, optional iKVM, and

optional second, redundant CMC, and provides a 10/100/1000-Mb

connection to the external management network.

NOTE: The 24-port Ethernet switch is reserved for internal communication

between the iDRAC on the blades to the CMC, then to the external

management network.

A second, optional CMC can be installed for hot-plug failover redundancy.

• An enclosure control panel that includes an LCD display which provides

current infrastructure and blade information, and error reporting.

• An optional Avocent integrated Keyboard, Video and Mouse (iKVM)

module, which includes the following features:

– The iKVM maintains all blade connections as input is switched from

each blade.

– Local iKVM access can be remotely disabled on a per blade basis via

the iDRAC user interface.

– One VGA connector.

– Two USB ports for keyboard and mouse connections.

NOTE: USB functionality is contingent on the connection of a video interface,

such as a monitor cable.

– An RJ-45 ACI port for tiering with external Dell and Avocent analog

KVM and KVM over IP switches with ARI ports. The ACI connection

takes precedence over the rear panel KVM ports.

– The iKVM can also be accessed from the control panel in the front of

the enclosure. Either front or rear KVM functionality is supported

(simultaneous functionality is not supported).

NOTE: The front iKVM is enabled by default if contention exists between the

front and rear iKVM ports. Front iKVM access can be disabled via the CMC

user interface.

6 Getting Started With Your System

Blade Features

Performance Features

PowerEdge M905

• Four AMD

™

Opteron

™

8000 Series dual-core or quad-core processors.

• A minimum of 8 GB of 677 MHz DDR2 memory modules, upgradable to

a maximum of 192 GB by installing pairs of 1-GB, 2-GB, 4-GB, or 8-GB

modules in the 24 memory module sockets on the blade system board.

The blade also supports memory sparing if eight or sixteen memory

module sockets are populated with identical memory modules.

• An SD (Secure Digital) card slot for embedded Hyperviser support.

PowerEdge M805

• Two AMD

Opteron

2000 Series dual-core or quad-core processors.

• A minimum of 4 GB of 677 MHz DDR2 memory modules, upgradable to

a maximum of 128 GB by installing pairs of 1-GB, 2-GB, 4-GB, or 8-GB

modules in the 16 memory module sockets on the blade system board.

The blade also supports memory sparing if eight or sixteen memory

module sockets are populated with identical memory modules.

• An SD card slot for embedded Hyperviser support.

PowerEdge M600

• One or two Intel

®

Xeon

®

dual-core or quad-core processors

• A minimum of 1 GB of 677-MHz FBD memory modules, upgradable to

a maximum of 64 GB by installing pairs of 512-MB, 1-GB, 2-GB, 4-GB,

or 8-GB modules in the eight memory module sockets on the blade system

board. The blade also supports memory sparing or memory mirroring if all

eight memory module sockets are populated with identical memory

modules.

Getting Started With Your System 7

PowerEdge M605

• One or two AMD

Opteron

2000 Series dual-core or quad-core processors.

• A minimum of 1 GB of 677-MHz or 800-MHz DDR2 memory modules,

upgradable to a maximum of 64 GB by installing pairs of 512-MB, 1-GB,

2-GB, 4-GB, or 8-GB modules in the eight memory module sockets on

the blade system board. The blade also supports memory sparing.

Common Features

• The PowerEdge M805 and M905 blades support one or two 2.5 inch SAS

hard drives.

• The PowerEdge M600 and M605 blades support one or two 2.5-inch SATA

hard drives,

or

one or two 2.5 inch SAS hard drives.

NOTE: SAS and SATA hard drives cannot be mixed within a blade.

Hot-plug drive operation is supported if an optional RAID controller card

is installed in the blade.

• Three USB 2.0-compliant ports (PowerEdge M805 and M905) or two USB

2.0-compliant ports (PowerEdge M605 and M600) support devices such as

a mouse, keyboard, flash drive, diskette drive, or an optical drive.

NOTE: Only Dell-supplied USB devices are supported.

• An integrated VGA-compatible video subsystem with an ATI RN50 video

controller. This video subsystem contains 32 MB of SDRAM video

memory (nonupgradable). Maximum resolution is 1280 x 1024 x 65,000

colors (noninterlaced).

• An Integrated Dell Remote Access Controller (iDRAC), which provides

remote system management, blade-level power management, virtual KVM

and virtual media support, remote alerting and event logging.

• Four 1-GB Ethernet ports supported by two integrated dual-port

Broadcom 5709S controllers (PowerEdge M805 and M905), or two 1-GB

Ethernet ports supported by two integrated Broadcom 5708S controllers

(PowerEdge M600 and M605). TCP/IP Offload Engine (TOE) and iSCSI

boot are supported.

For a complete list of system features, see "Technical Specifications" on

page 15.

8 Getting Started With Your System

The following software is included with your system:

• A System Setup program for quickly viewing and changing system

configuration information. For more information on this program, see

"Using the System Setup Program" in your

Hardware Owner’s Manual

.

• Enhanced security features, including a system password and a setup

password, available through the System Setup program.

• System diagnostics for evaluating system components and devices.

For information about the system diagnostics, see "Running the System

Diagnostics" in your

Hardware Owner’s Manual

.

• Video drivers for displaying many popular application programs in high-

resolution modes.

• Systems management software and documentation. Systems management

software is used to manage and monitor each individual blade as well as

the system as a whole, including all of the blades, network switch modules,

power supplies, and fans. Systems management software manages the

system locally and remotely on a network. Dell recommends that you use

the systems management software provided with this system.

• Optional solutions software for Web hosting, caching, or load balancing.

See your solutions software documentation for more information.

Supported Operating Systems

• Microsoft

®

Windows Server

™

2003, Web, Standard and Enterprise

(32-bit x86) Editions with SP2

• Microsoft Windows Server 2003, Standard, Enterprise, and DataCenter

(x64) Editions SP1, SP2

• Microsoft Windows Server 2003 R2 Standard and Enterprise (32- bit x86)

Editions with SP1, SP2

• Microsoft Windows Server 2003 R2 Standard, Enterprise, and DataCenter

(x64) Editions with SP1, SP2

• Microsoft Windows Server 2008, Standard Edition with SP1, SP2,

DataCenter, and EM64T

•Red Hat

®

Enterprise Linux

®

AS, ES, and WS (version 4) and EM64T

• Red Hat Enterprise Linux AS and ES (version 4) (ia32

)

Getting Started With Your System 9

• Red Hat Enterprise Linux Server AS and ES (version 5) (ia32)

• Red Hat Enterprise Linux Server AS, ES, and WS (version 5) and EM64T

•SUSE

®

Linux Enterprise Server 9 (x86_64) with SP3 and EM64T

• SUSE Linux Enterprise Server 10 (x86_64) and EM64T

•VMWare

®

ESX 3.1

• VMWare ESX 3.5

Other Information You May Need

CAUTION: See the safety and regulatory information that shipped with your

system. Warranty information may be included within this document or as a

separate document.

• The

Configuration Guide

provides information on configuring the system

enclosure and the blades.

• The

Rack Installation Guide

or

Rack Installation Instructions

included

with your rack solution describes how to install your system into a rack.

• The

Hardware Owner’s Manual

provides information about system

features and describes how to troubleshoot the system and install or

replace system components. This document may be found on the CDs

that came with your system or at

support.dell.com

.

• The

Dell Chassis Management Controller User’s Guide

provides detailed

information on using the remote management features of the system.

• CDs or DVDs included with your system provide documentation and tools

for configuring and managing your system.

• Systems management software documentation describes the features,

requirements, installation, and basic operation of the software.

• Operating system documentation describes how to install (if necessary),

configure, and use the operating system software.

• Documentation for any components you purchased separately provides

information to configure and install these options.

10 Getting Started With Your System

• Updates are sometimes included with the system to describe changes

to the system, software, and/or documentation.

NOTE: Always check for updates on support.dell.com and read the updates

first because they often supersede information in other documents.

• Release notes or readme files may be included to provide last-minute

updates to the system or documentation or advanced technical reference

material intended for experienced users or technicians.

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not

perform as expected, see your Hardware Owner’s Manual.

Dell Enterprise Training and Certification is available; see dell.com/training

for more information. This service may not be offered in all locations.

Installation and Configuration

CAUTION: Before performing the following procedure, read and follow the safety

instructions and important regulatory information that shipped with your system.

For additional safety best practices information, see

www.dell.com/regulatory_compliance.

This section describes the steps required to set up your system for the first

time.

Unpack the System

Unpack your system and identify each item. Keep all shipping materials in

case you need them later.

Getting Started With Your System 11

Install the System in a Rack

Install the system in the rack once you have read the "Safety Instructions"

located in the rack installation documentation for your system.

See your rack installation documentation for instructions on installing your

system in a rack. For power and cooling guidelines, see the rack capacity

planner tool on www.dell.com.

Install the Blades

Beginning at the top, slide the modules into the enclosure from left to right.

When the blade is securely installed, the handle returns to the closed

position.

12 Getting Started With Your System

Connect the CMC and KVM Modules

Connect the serial cable and network cable from the management system to

the CMC module. If a second, optional CMC module is installed, connect it

as well. (If your chassis was shipped with M805 or M905 blades pre-installed,

the included CMC firmware will be version 1.2 or greater.)

Connect the keyboard, mouse, and monitor to the optional iKVM module.

Connect the System to Power

Connect the system’s power cables to the system power supplies.

NOTICE: To prevent the power cables from being disconnected accidentally,

use the plastic clip on each power supply to secure the power cable to the power

supply, and use the Velcro strap to secure the cable to the strain-relief bar.

Next, plug the other end of the power cables into a separate power source

such as an uninterruptible power supply (UPS) or a power distribution unit

(PDU).

Getting Started With Your System 13

Turn on the System

Press the power button on the enclosure. The power indicator should light.

14 Getting Started With Your System

Turn on the Blades

Press the power button on each blade, or power on the blades using

the systems management software.

Complete the 0perating System Setup

If you purchased a preinstalled operating system, see the operating system

documentation that ships with your system. To install an operating system for

the first time, see the Quick Installation Guide. Be sure the operating system

is installed before installing hardware or software not purchased with the

system.

Getting Started With Your System 15

Technical Specifications

Blade Specifications

Processor

Processor type

PowerEdge M905

Four dual-core or quad-core AMD

Opteron 8000 Series processors

PowerEdge M805

Two dual-core or quad-core AMD

Opteron 2000 Series processors

PowerEdge M600

One or two dual-core or quad-core Intel

Xeon processors

PowerEdge M605

One or two dual-core or quad-core AMD

Opteron 2000 Series processors

Memory

Architecture

PowerEdge M600

FBD memory modules, rated for

677-MHz operation

PowerEdge M905, M805, M605

DDR2 memory modules, rated for

677-MHz operation

Memory module sockets

PowerEdge M905

24 240-pin sockets

PowerEdge M805

16 240-pin sockets

PowerEdge M605, M600

Eight 240-pin sockets

Memory module capacities 512 MB (PowerEdge M605 and M600),

1 GB, 2 GB, 4 GB, or 8 GB

Minimum RAM Two memory modules per processor

PowerEdge M905

8 GB (Eight 1-GB memory modules)

PowerEdge M805

4 GB (Four 1-GB memory modules)

PowerEdge M600, M605

1 GB (two 512-MB memory modules)

16 Getting Started With Your System

Maximum RAM

PowerEdge M905

192 GB

PowerEdge M805

128 GB

PowerEdge M600, M605

64 GB

Drives

Hard Drives

PowerEdge M805, M905 One or two 2.5-inch SAS hard drives

PowerEdge M600, M605

SATA configuration

One or two 2.5-inch SATA hard drives

SAS configuration

One or two 2.5-inch SAS hard drives

NOTE: SAS and SATA hard drives cannot

be mixed within a M600 or M605 blade.

Connectors

External

USB

PowerEdge M805, M905

Three 4-pin, USB 2.0 compliant

PowerEdge M600, M605

Two 4-pin, USB 2.0 compliant

Internal

SD Card (PowerEdge M805, M905) One SD card connector

Ethernet Controllers

Chipset

PowerEdge M805, M905

Four Ethernet ports with TOE and iSCSI

boot support, provided by two integrated

dual-port Broadcom 5709S Ethernet

controllers

PowerEdge M600, M605

Two Ethernet ports with TOE and iSCSI

boot support, provided by two integrated

Broadcom 5708S controllers

Memory (continued)

Getting Started With Your System 17

System Enclosure Specifications

Video Controller

Video type ATI RN50 video controller

Video memory 32 MB

Physical

PowerEdge M905, M805

Height

38.5cm (15.2 in)

Width

5 cm (2 in)

Depth

48.6 cm (19.2 in)

Weight (maximum configuration)

11.1 kg (24.5 lb)

PowerEdge M605, M600

Height

18.9 cm (7.4 in)

Width

5 cm (2 in)

Depth

48.6 cm (19.2 in)

Weight (maximum configuration)

5.2-6.4 kg (11.5-14.0 lb)

Battery

Blade battery CR 2032 3.0-V lithium ion coin cell

Physical

Height 44.0 cm (17.3 in)

Width 44.7 cm (17.6 in)

Depth 75.5 cm (29.7 in)

Weight (maximum configuration) 178.3 kg (392.2 lb)

Weight (empty) 44.6 kg (98.1 lb)

18 Getting Started With Your System

Power Supply Module

AC/DC power supply (per power supply)

Wa tt ag e

2360 W

Connector

NEMA C20 receptacle

Heat dissipation

1205 BTU/hr. maximum

Maximum inrush current

Under typical line conditions and over the

entire system ambient operating range,

the inrush current may reach 55 A per

power supply for 10 ms or less.

System Voltage Requirements

200 - 240V, 16A, 3-Phase, 50 /60Hz

200 - 240V, 40.5A, Single Phase, 50 /60Hz

Optional Avocent iKVM Module

Rear externally accessible connectors

USB

Two 4-pin, USB 2.0-compliant connectors

for keyboard and mouse support

ACI port

RJ-45

Video

15-pin VGA

Chassis Management Controller Module

Externally accessible connectors

Remote management

Two dedicated 10/100/1000 Mb RJ-45

ports for integrated Ethernet remote

access controller.

Serial

9-pin, DTE, 16550-compatible

Video

15-pin VGA

Battery CR 2032 3.0-V lithium ion coin cell

SD Card One dedicated internal SD (Secure

Digital) flash card memory slot for

FlexAddress support.

ページが読み込まれています...

Dell PowerEdge M600 クイックスタートガイド

Dell PowerEdge M600 クイックスタートガイド

他の言語で