BAM200 使用
第三步: 使用
保护模式
为了您的安全和保护功放, 此产
品配备了先进的保护系统。 这些
保护功能只有当你在极端条件
下使用本产品时才开启。
务必不要覆盖
BAM200 的冷却
栅! 通风效果差可能导致功放
的温度上升到临界值。
BAM200 配备了智能保护系统,
确保功放在操作错误时或极端
环境下不会发生故障。 当功放
转入保护模式时, 音箱输出信
号静音。
启用保护模式…
• 发生短路(在音箱输出端)。
• 功放在太热的环境下使用。
• 通风效果差。
• 如果内置扬声器和连接的音
箱的混合阻抗低于
4 欧姆。
在保护模式, 音箱输出关闭防
止音箱损坏。 然而平衡式输出
端仍然传送音频信号。
在保护模式如何开展工作
1. 如果功放不能从保护模式
自动恢复且发烫, 将功放关
一会儿让它冷却。 确保充足
的通风。
2. 确保您的音箱线没有缺陷,
因为这种缺陷可能导致短路。
3. 再次打开功放。如果这些步
骤不能解决问题, 你需将功
放送到授权服务中心检查。
链接
• TC ELECTRONIC 贝司产品:
tcelectronic.com/bass/
• TonePrint 贝司: tcelectronic.com/
toneprint/toneprint-bass/
• TC 支持: tcelectronic.com/
support
• TC @ Facebook: facebook.com/
tcelectronic
技术参数
Output Power
Max output power* 200 W
Type Class-D
Audio Inputs
Instrument input ¼ " TS, unbalanced
Impedance 10 MΩ
Gain -∞ to +40 dB
Tone Controls
Bass ±15 dB @ 80 Hz, shelving
Middle 400 Hz @ Gain: ±15 dB
Treble ±15 dB @ 4.2 kHz, shelving
Audio Outputs
Phones out ¼ " TRS, unbalanced
Impedance 47 Ω
Direct output XLR, balanced
Impedance 1 kΩ
Ground lift Switchable
Loudspeaker output ¼ ", TS
Min. load impedance 4 Ω
Indicators
Signal/peak Green/Red LED
Power Green LED
Power Supply
Europe/UK/Australia/China/Korea 220-240 V~ 50/60 Hz
USA/Canada/Japan 100-120 V~ 50/60 Hz
Power consumption 60 W
Mains connection Standard IEC receptacle
Dimension/Weight
Dimension (H x W x D)
43 x 164 x 133 mm
(1.7 x 6.5 x 5.2")
Weight 0.92 kg (2.0 lbs)
*independent of limiters and driver protection circuits
Due to continuous development, these speci cations are subject to change without notice.
6 7
快速启动向导
BAM200