Gigabyte GA-8IPE1000 PRO3 インストールガイド

Serial ATA(Intel ICH5R).......................................................................2

(1)SATA................................................................................................................2

(2)BIOS SATA...................................3

(3)RAID BIOSRAID...................................................................................5

(4)SATA..............................................8

(5)SATA..........................................................10

Intel ICH5R SATA- 2 -

Ác

Åé

¤¤

¤å

Serial ATA(Intel ICH5R)

SATA

(1)SATA

(2)BIOS SATA

(3)*RAID BIOSRAID

(4)SATA

(5)SATA

(a)SATA(S ATA

RAID)

(b)

(c)Windows XP 2000

(d)

(1)SATA

SATA SATA

SATA(SATA

SATA0_SB/SATA1_SB)

"*"RAID

Intel ICH5R SATA- 3 -

1

(2)BIOS SATA

BIOS SATA

1BIOS POST (Power-On Self Test)<Del>

BIOSCMOS SETUPIntegrated Peripherals

On-Chip SATAAutoManualSATA RAID Function Enabled

(1)RAIDSATA RAID Function Disabled

Integrated Peripherals

On-Chip Primary PCI IDE [Enabled]

On-Chip Secondary PCI IDE [Enabled]

On-Chip SATA [Auto]

xSATA Port0 Configure as SATA Port0

SATA Port1 Configure as SATA Port1

SATA RAID Function [Enabled]

USB Controller [Enabled]

USB 2.0 Controller [Enabled]

USB Keyboard Support [Disabled]

USB Mouse Support [Disabled]

AC97 Audio [Auto]

Onboard H/W SATA [Enabled]

Serial ATA Function [RAID]

Onboard H/W GIGARAID [Enabled]

GigaRAID Function [RAID]

Onboard H/W 1394 [Enabled]

Onboard H/W LAN [Enabled]

Onboard Serial Port 1 [3F8/IRQ4]

Onboard Serial Port 2 [2F8/IRQ3]

Item Help

Menu Level }

If a hard disk

controller card is

used, set as Disabled

[Enabled]

Enabled onboard IDE

Port

[Disabled]

Disabled onboard IDE

Port

higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help

F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults

Intel ICH5R SATA- 4 -

Ác

Åé

¤¤

¤å

2Advanced BIOS Features Hard Disk Boot Priority

Microsoft Windows 2000/XP SATA(2)

2

Hard Disk Boot Priority

1. SCSI-0 : ST3120026AS

2. SCSI-1. : ST3120026AS

3. Bootable Add-in Cards

hi: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit

Item Help

Menu Level }}

Use <h> or <i> to

select a device, then

press <+> to move it

up, or <-> to move it

down the list. Press

<ESC> to exit this

menu.

3

First Boot Device CD-ROMCD-ROM(3)

Advanced BIOS Features

}Hard Disk Boot Priority [Press Enter]

First Boot Device [CDROM]

Second Boot Device [Hard Disk]

Third Boot Device [CDROM]

Password Check [Setup]

Limit CPUID Max. to 3 [Enabled]

DRAM Data Integrity Mode Non-ECC

higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help

F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults

Item Help

Menu Level }

4

BIOS

3

Intel ICH5R SATA- 5 -

(3)RAID BIOSRAID

SATARAID BIOS SATA RAID

RAID

1BIOS POST (Power-On Self Test)

4<CTRL>+<I>Intel ICH5R RAID BIOS

4

Intel (R) RAID for Serial ATA- RAID BIOS v3.5.0.2568

RAID Volumes:

None defined.

Non-RAID Disks:

Port Drive Model Serial # Size Status Bootab

0ST3120026AS 3JT31DJR 111.7GB Normal Yes

1ST3120026AS 3KA0DLZX 111.7GB Normal Yes

Press <CTRL-I> to enter Configuration Utility...

2

<Ctrl>+<I>Intel ICH5R RAID BIOS5

(MAIN MENU): MAIN MENU

1. Create RAID Volume:

2. Delete RAID Volume:

3. Reset Disks to Non-RAID:

4. RAID BIOS

/ (DISK/VOLUME INFORMATION):

5

RAID Volumes:

None defined.

None-RAID Disks:

Port Drive Model Serial # Size Status Bootab

0ST3120026AS 3JT31DJR 111.7GB Normal Yes

1ST3120026AS 3KA0DLZX 111.7GB Normal Yes

[ DISK/VOLUME INFORMATION ]

[ MAIN MENU ]

Intel(R) RAID for Serial ATA-RAID Configuration Utility

[hi]- Select [Esc]- Exit [ENTER] -Select Menu

1. Create RAID Volume

2. Delete RAID Volume

3. Reset Disks to Non-RAID

4. Exit

Intel ICH5R SATA- 6 -

Ác

Åé

¤¤

¤å

3(6)

1. Creat RAID Volume <Enter>

(CREATE ARRAY MENU) (

I. (Name): 16

II. (RAID Level): RAID0(Stripe)

RAID0(Stripe)RAID1(Mirror)

III. (Strip Size): RAID0

32K64K

IV. (Create Volume): Cre-

ate Volume<Enter> <Y>

(7)

6

7

Enter a string between 1 and 16 characters in length that can be used

to uniquely identify the RAID volume. This name is case sensitive and

can not contain special characters.

[ HELP ]

[ CREATE ARRAY MENU ]

Intel(R) RAID for Serial ATA-RAID Configuration Utility

[hi]- Change [TAB]- Next [ESC] -Previous Menu [ENTER]-Select

RAID_Volume1

RAID0 (Stripe)

128KB

223.5GB

Name:

RAID Level:

Strip Size:

Capacity:

Create Volume

Intel ICH5R SATA- 7 -

(7)DISK/VOLUME INFORMATION

RAID

2. Delect RAID VolumeDELETE RAID ARRAY

Serial ATA-RAID Configuration Utility<Esc>

7

RAID Volumes:

ID NAME Level Strip Size Status Bootab

0 RAID Volume1 RAID0(Stripe) 64KB 223.5GB Normal Yes

ST3120026AS 3JT31DJR Port0 111.7GB Normal

ST3120026AS 3KA0DLZX Port1 111.7GB Normal

[ DISK/VOLUME INFORMATION ]

[ MAIN MENU ]

Intel(R) RAID for Serial ATA-RAID Configuration Utility

[hi]- Select [Esc]- Exit [ENTER] -Select Menu

1. Create RAID Volume

2. Delete RAID Volume

3. Reset Disks to Non-RAID

4. Exit

Intel ICH5R SATA- 8 -

Ác

Åé

¤¤

¤å

(4)SATA

Microsoft Windows 2000/XP SATA

SA TA

SATA

1

2(8)

9

BootDrv

MENU.EXE(9)

8

Intel ICH5R SATA- 9 -

3

MENU.EXE MS-DOS(

10)

11

10

4Microsoft Windows

XP 1 (1)IAA_RAID)SATA

5(11)0SATA

Intel ICH5R SATA- 10 -

Ác

Åé

¤¤

¤å

12

Windows Setup

Press F6 if you need to install a 3rd party SCSI or RAID driver.

(5)SATA

SATA BIOS

Microsoft Windows 2000 XP SATA(Microsoft

Windows XP )

1Microsoft Windows 2000 XP

Press F6 if you need to install a 3rd party SCSI or RAID driver

13 <F6>1

2SATA<S>(13)

13

Windows Setup

S=Specify Additional Device ENTER=Continue F3=Exit

Setup could not determine the type of one or more mass storage devices

installed in your system, or you have chosen to manually specify an adapter.

Currently, Setup will load support for the following mass storage devices(s)

<none>

* To specify additional SCSI adapters, CD-ROM drives, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

Intel ICH5R SATA- 11 -

3(14)Intel(R)

82801ER SATA RAID Controller<Enter>SATA

14

SATA

4<Enter>SATA1

15

Windows Setup

S=Specify Additional Device Enter=Continue F3=Exit

Setup will load support for the following mass storage device(s):

Intel(R) 82801ER SATA RAID Controller

* To specify additional SCSI adapters, CD-ROM drives, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

Windows Setup

ENTER=Select F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

Intel(R) 82801ER SATA RAID Controller

Intel ICH5R SATA- 12 -

Ác

Åé

¤¤

¤å

SATA(16)<ENTER>

Microsoft Windows 2000 XP

16

WindowsXP Professional

Microsoft(R)

Windows (R) XP

Windows XP

indows XP

ENTER= R= F3=

Gigabyte GA-8IPE1000 PRO3, GA-8I875, GA-8I875 ULTRA, GA-8IK1100, GA-8KNXP, GA-8KNXP ULTRA インストールガイド

関連論文