4-187-907-11(1)
LCD
Digital Colour TV
Operating Instructions GB
操作手冊
CT
KDL-60LX900 / 52LX900
2
GB
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
~
• The illustrations used in this manual may
differ depending on your TV model.
Trademark information
HDMI, the HDMI Logo, and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
DLNA®, the DLNA Logo and DLNA
CERTIFIED® are trademarks, service
marks, or certification marks of the Digital
Living Network Alliance.
DivX® is a video file compression
technology, developed by DivX, Inc.
DivX, DivX Certified, and associated
logos are trademarks of DivX, Inc. and are
used under license.
ABOUT DIVX VIDEO: DivX® is a
digital video format created by DivX,Inc.
This is an official DivX Certified device
that plays DivX video. Visit
www.divx.com for more information and
software tools to convert your files into
DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be
registered in order to play DivX Video-on-
Demand (VOD) content. To generate the
registration code, locate the DivX VOD
section in the device setup menu. Go to
vod.divx.com with this code to complete
the registration process and learn more
about DivX VOD.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
“BRAVIA” and are
trademarks of Sony Corporation.
“XMB” and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
“FACE DETECTION” logo is trademark
of Sony Corporation.
The typefaces used on the screen display
are solely developed by DynaComware.
Location of the
identification label
Labels for Model No. and Power Supply
rating (in accordance with applicable
safety regulation) are located on the rear of
the TV. They can be found by removing
the bottom cover.
This television is designed for
use in Hong Kong and ensured
the usage in Hong Kong only.
3
GB
GB
Table of Contents
Checking the accessories.............................................................................................................. 3
Inserting batteries into the remote ................................................................................................. 3
Setting Up
Attaching the Table-Top Stand (except KDL-60LX900) ................................................................ 4
Connecting an antenna (aerial)/cable/VCR................................................................................... 5
Preventing the TV from toppling over ............................................................................................6
Bundling the cables ....................................................................................................................... 6
Performing the initial set-up........................................................................................................... 7
Detaching the Table-Top Stand from the TV................................................................................. 7
Watching TV
To watch programmes................................................................................................................... 8
To utilise the TV’s features ............................................................................................................ 8
To use i-Manual............................................................................................................................. 9
To use 3D Glasses ...................................................................................................................... 10
Additional Information
Troubleshooting........................................................................................................................... 12
Specifications .............................................................................................................................. 13
Installing the Accessories (Wall-Mount Bracket) ......................................................................... 15
Safety Information ....................................................................................................................... 20
Precautions.................................................................................................................................. 21
Checking the accessories
AC power cord (mains lead)
Cable holder (1) (except KDL-60LX900)
Remote (1)
Size AAA batteries (R3 type) (2)
Table-Top Stand (1) (except KDL-
60LX900)
Fixing screws for Table-Top Stand
(M5 × 16) (4) (except KDL-60LX900)
Black spacers (4) (KDL-52LX900 only)
Silver spacers (4) (KDL-60LX900 only)
Screws (M6 × 20) (4) (KDL-60LX900 only)
Stand rear cover (1)*
1
Bottom cover (1)*
2
3D Glasses (battery included) (2)
Pouch for 3D Glasses (2)
*1
For KDL-60LX900, the stand rear cover is
factory-attached to the Table-Top Stand.
*2
For KDL-60LX900, the bottom cover is factory-
attached to the TV.
Inserting batteries into the
remote
1 Remove the protection sheet.
2 Push and slide the cover upward.
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 9).
• Before operating the TV, please read “Safety Information” (page 20). Retain this manual for future reference.
4
GB
Setting Up
Attaching the Table-Top
Stand (except KDL-
60LX900)
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2 Place the TV set on the Table-Top
Stand.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
4 After all the screws have been
tightened, attach the supplied stand rear
cover to the Table-Top Stand.
Adjusting the viewing angle of
the TV (except KDL-60LX900)
This TV can be adjusted within the angles
shown below.
~
• To return to 0°, reverse the above procedure.
1
4
2
3
Remove screw as
shown.
6º0º
Install screw into
the top screw hole
of the Table-Top
Stand.
Slide in.Lift up and tilt.
5
GB
Setting Up
• Ensure that there are no objects in front of the TV.
• Do not expose the Intelligent Presence Sensor to
direct sunlight or other strong light, as
malfunction may occur.
Connecting an antenna
(aerial)/cable/VCR
Connecting an antenna (aerial)/cable
Connecting an antenna (aerial)/cable
and VCR
~
• For KDL-52LX900, after connecting cables,
install the bottom cover and stand rear cover.
Detaching the terminal cover
~
• After connecting cables, re-attach the terminal
cover to the TV.
Intelligent Presence Sensor
3D Sync Transmitter
IR Sensor
Antenna (aerial) cable
(not supplied)
Antenna (aerial) cable
(not supplied)
Antenna (aerial)
cable
(not supplied)
Antenna
(aerial) cable
(not supplied)
AV cable
(not supplied)
VCR
6
GB
Preventing the TV from
toppling over
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
z
• An optional Sony support belt kit is used to secure
the TV. Contact your nearest Sony service centre
to purchase a kit. Have your TV model name
ready for reference.
Bundling the cables
~
• A cable holder is available for KDL-52LX900. To
bundle the cables, follow steps 3 to 5.
~
• Do not bundle the AC power cord (mains lead)
together with other cables.
7
GB
Setting Up
Performing the initial set-up
1 Connect the TV to your AC power
outlet (mains socket).
2 Check the ENERGY SAVING
SWITCH setting is on (
z).
3 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
Follow the instructions on the screen.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press F/f to select the channel you want
to move to a new position, then press .
2 Press F/f to select the new position for
the channel, then press .
~
• You can also tune channels manually.
Detaching the Table-Top
Stand from the TV
~
• Remove the stand rear cover and bottom cover
prior to detaching the Table-Top Stand.
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
4
8
GB
Watching TV
To watch programmes
To utilise the TV’s features
z
• The number 5, N, PROG + and AUDIO
buttons on the remote have a tactile dot.
Use the tactile dots as a reference when
operating the TV.
1
Turn on the TV.
1 Switch ENERGY SAVING SWITCH
on (
z).
2 Press 1 on the TV to turn on the TV.
2
Select a mode.
3
Select a TV channel.
Using Digital Electronic Programme
Guide
Press GUIDE in digital mode to display the
programme guide.
HOME button
Press to display various operation and setting
screens.
OPTIONS button
Press to display convenient functions based
on the current input or content.
GUIDE
HOME
2
3
OPTIONS
Settings
TV
System Settings
Picture
Sound
3D Menu
Add to Favourites
MPEG Noise Reduction
Presence Sensor
Scene Select
Sleep Timer
Headphone Volume
Speakers
System Information
9
GB
Watching TV
To use i-Manual
x Welcome to i-Manual
x “BRAVIA” TV Features
x Watching TV
Introduces convenient features such as EPG
Guide, Favourites, etc.
x Using the Home Menu
Customise your TV settings, etc.
x Fun Features with Connected
Equipment
Introduces how to connect optional equipment.
x Parts Description
x Troubleshooting
Find solutions for your problem.
x Index
~
• Images and illustrations may differ from what is displayed on the screen.
Operating instructions are built into your BRAVIA
TV and can be displayed on the screen.
To learn more about your TVs features you can
access your i-Manual with the touch of a button.
1
Press i-MANUAL.
2
Press G/g/F/f/ to select items.
1
2
(Continued)
10
GB
To use 3D Glasses
Before use: Remove the battery’s insulating sheet before using the product for the first time.
Parts and components
1 Slide switch
Set the switch for a comfortable fit. Set
both the switches on either side for a
comfortable fit. Close the temple frames
slightly inwards to set the switch.
2 Battery cover
Detach the cover when replacing the
battery.
3 LED indicator
Flashes one time every 3 seconds: Power
on
Flashes three times every 3 seconds: Low
battery. Battery capacity is almost running
out.
Flashes three times: Power off
4 IR sensor
Receive signals from the 3D Sync
Transmitter.
IR’s entry angle differs according to
distance or usage environment.
~
• Please keep this face clean.
5 Power button
Power on: Press once
Power off: Hold power button down for 2
seconds
* Auto power off: More than 5 minutes without
IR signal
6 Nose pad
Adjust the nose pad for a comfortable fit.
7 Temple frames
You can bend (adjust) the temple frames
for a comfortable fit.
Pouch (2)
3D Glasses (2)
Increases the width
of the glasses
Decreases the width
of the glasses
This part receives IR
(infrared rays) from the
3D Sync Transmitter.
11
GB
Watching TV
Replacing the battery
If the LED indicates low battery power, replace the battery. Use a CR2032 battery.
~
• When opening or closing the battery cover, make sure the coin, etc., is properly inserted in the groove of the
battery cover.
Precautions for use
• The 3D Glasses are operated by receiving infrared rays from the 3D Sync Transmitter.
Mis-operation may occur if:
– The 3D Glasses do not face the 3D Sync Transmitter
– If there are objects blocking the path between the 3D Glasses and the 3D Sync Transmitter
– If there are other infrared communication devices nearby
• Watch the TV using the 3D Glasses, facing squarely towards the TV.
• 3D effect is inadequate and screen colour will be shifted with lying down position or leaning
your head.
• To preserve our environment dispose of used batteries according to your local laws or
regulations.
Safety precautions
• You should only use this product for watching 3D video images on a compatible Sony television.
• Do not drop or modify these 3D Glasses.
• If these glasses are broken, keep broken pieces away from your mouth or eyes.
• Keep children away when replacing the battery or opening the battery cover. If a child swallows
the battery or battery cover, consult a doctor immediately.
• Do not dispose of the batteries used in 3D Glasses in a fire.
• When replacing the battery, insert it using the correct +/– orientation.
• Use only the specified battery for this product: Lithium/manganese Battery, CR2032.
• Not for use by children without proper adult supervision.
• Be careful not to pinch your fingers in hinges of the 3D Glasses when bending the temple frames.
Open the battery cover.
Push here
and remove
the battery at
an angle.
Battery
(CR2032)
Coin, etc.
* Align the • mark and the • ( ) mark.
12
GB
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated.
1 Count how many times the 1 (standby) indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three
times.
2 Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform
your dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1 Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2 If the problem persists, have your TV serviced by qualified service personnel.
Condition Explanation/Solution
Picture
There is no picture (screen
is dark) and no sound.
• Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press 1 on the TV.
• If the 1 (standby) indicator lights up in red, press TV"/1.
Tiny black points and/or
bright points appear on the
screen.
• The screen is composed of pixels. Tiny black points and/or bright
points (pixels) on the screen do not indicate a malfunction.
General
The TV’s power cannot be
turned on.
• Check if ENERGY SAVING SWITCH is on (z).
The TV turns off
automatically (the TV
enters standby mode).
• Check if the “Sleep Timer” is activated, or confirm the
“Duration” setting of “On Timer”.
• Check if the “Idle TV Standby” is activated.
• Check if “Presence Sensor” in “Eco” is activated.
The remote does not
function.
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select “Home
(Menu)” or “Options” to control the TV.
The “Parental Lock” password
has been forgotten.
• Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become
warm.
• When the TV is used for an extended period, the TV surrounds
become warm.
You may feel hot when touching there by the hand.
13
GB
Additional Information
Specifications
Design and specifications are subject to change without notice.
System
Panel system
LCD (Liquid Crystal Display) Panel
TV system
Analogue: B/G, I, D/K, M
Digital: DTMB
Colour/video system
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video
input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverage
Analogue:B/G: VHF: E2–E12/UHF: E21–E69/CATV: S01–S03, S1–S41
I: UHF: B21–B69/CATV: S01–S03, S1–S41
D/K: VHF: C1–C12, R1–R12/UHF: C13–C57, R21–R60/CATV: S01–S03,
S1–S41
M: VHF: A2–A13/UHF: A14–A79/CATV: A8–A2, A–W+4, W+6–W+84
Digital: UHF
Sound output
10 W + 10 W
Input/Output jacks
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
1
Video input (phono jack)
1, 2
Audio input (phono jacks)
/2
COMPONENT IN
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
2 Video input (phono jacks)
HDMI IN1, 2, 3, 4
Video: 1080/24p, 1080p, 1080i, 720/24p, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN2 only)
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM, Dolby Digital)
(VAR/FIX)
Audio output (phono jacks)
PC IN
PC Input (Mini D-sub 15-pin)
PC audio input (minijack)
USB port
i
Headphones jack
LAN
10BASE-T/100BASE-TX connector (Depending on the operating environment of the
network, connection speed may differ. 10BASE-T/100BASE-TX communication rate and
communication quality are not guaranteed for this TV.)
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
Model name KDL-
60LX900 52LX900
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured diagonally)
60 inches
(Approx. 152.5cm)
52 inches
(Approx. 132.2cm)
Display resolution
1,920 dots (horizontal) × 1,080 lines (vertical)
Power consumption
Indicated on the rear of the TV
Dimensions
(Approx.)
(w × h × d)
with Tabl e-Top St an d
(mm)
1,440 × 938 × 380 1,261 × 838 × 400
without Ta ble-Top Stand
(mm)
1,440 × 906 × 64 1,261 × 804 × 64
Mass (Approx.) with Table-Top Stand
49.8 kg 36.2 kg
without Ta ble-Top Stand
42.8 kg 30.2 kg
Supplied accessories
See “Checking the accessories” (page 3).
Optional
accessories
Wall-Mount Bracket
SU-WL50B
SU-WL500 SU-WL700
Wall-Hanging Bracket
SU-WH500
3D Glasses
TDG-BR100
TDG-BR50
(Continued)
14
GB
3D Glasses TDG-BR100
Weight
77 g (including battery)
Battery type
CR2032/3V
Battery life
Up to 100 hours of battery life
The battery life will vary based on usage patterns, environmental condition (temperature)
and the battery brand(s).
Dimensions (Approx.) (w × h × d)
179 × 40 × 183 mm
15
GB
Additional Information
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL500 (KDL-60LX900 only), SU-WL50B, or SU-WL700
(except KDL-60LX900) Wall-Mount Bracket (sold separately).
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
• Refer to “Detaching the Table-Top Stand from the TV” (page 7).
SU-WL500 (KDL-60LX900 only)/SU-WL50B
~
• When installing the TV on a wall, remove the four screws from the rear of the TV. (They are fastened in the
screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from
children.
• Attach the Mounting Hook using the supplied four spacers and four M6 × 20 screws (KDL-60LX900).
• Attach the Mounting Hook using the supplied four spacers and the four M6 × 16 screws supplied with
SU-WL50B (KDL-52LX900).
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.
• Remove the bottom cover and terminal cover first before detaching the Table-Top Stand. See step 4 (page 18)
for details.
• When attaching the Table-Top Stand again, be sure to fasten the four screws (previously removed) to the
original holes on the rear of the TV.
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
Mounting Hook
Screw (M6 × 20)
SU-WL500
Spacer
Screw (M6 × 20) (KDL-60LX900)
Screw (M6 × 16) (KDL-52LX900)
Mounting
Hook
Spacer
SU-WL50B
(Continued)
16
GB
TV installation dimensions table
SU-WL500
SU-WL50B
Unit: mm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four
times that of the TV. Refer to “Specifications” (page 13) for its weight.
Model Name
KDL-
Display
dimensions
Screen
centre
dimension
Length for each mounting angle
Angle (0°) Angle (20°)
AB
C DEFGH
SU-
WL500
SU-
WL50B
SU-
WL500
SU-
WL50B
SU-
WL500
SU-
WL50B
SU-WL500 only
60LX900
1,440 906 31 59 503 531 121 122 386 850 521
52LX900
1,261 804 – 110 – 531 – 116 –
Screen centre point
Screen centre point
WARNING
17
GB
Additional Information
Screw and Hook locations diagram/table
SU-WL500
SU-WL50B
Model Name
Screw location Hook location
SU-WL500 SU-WL50B SU-WL500 SU-WL50B
KDL-60LX900 e, j a
KDL-52LX900 – e, j – b
Screw location
When installing the Mounting Hook on the
TV.
Hook location
When installing the TV onto the Base Bracket.
b
a
c*
*Hook location “c” cannot be used
for the models.
a
b
c
c
b
a
Screw location
When installing the Mounting Hook on the
TV.
Hook location
When installing the TV onto the Base Bracket.
b
a
c*
*Hook location “c” cannot be used
for the models.
Base Bracket
Mounting Hook
(Continued)
18
GB
SU-WL700 (except KDL-
60LX900)
Installing on a wall
Be sure to install the Wall-Mount Bracket securely
to the wall following the instructions in this as well
as the manual provided with the Wall-Mount
Bracket. The numbers given in the parentheses
indicate the installation steps described in the
instruction manual provided with Wall-Mount
Bracket.
1 Check the parts supplied with the Wall-
Mount Bracket (1).
Refer to the instruction manual provided
with the Wall-Mount Bracket.
2 Decide on the installation location.
(2-1)
Refer to the following “TV installation
dimensions table”. Allow for suitable
clearance between the TV, the ceiling and
protruding parts of the wall as instructed.
3 Install the Base Bracket on the wall.
(2-2 through 3)
Decide the positions of the screw on the
wall and install the Base Bracket. Refer to
the instruction manual provided with the
Wall-Mount Bracket for details.
4 Detach the Table-Top Stand from the
TV, if necessary. (4-1)
• Remove the bottom cover and terminal
cover first before detaching the Table-
Top Stand.
• See “Detaching the Table-Top Stand
from the TV” (page 7) for details.
5 Connect the supplied AC power cord
(mains lead). (5-1)
~
• Do not attach the bottom cover and terminal
cover.
6 Place the Spacers.
~
• When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of
the TV.
7 Attach the Mounting Bracket and the
Lock Bracket. (4-3 through 4-7)
Refer to the instruction manual provided
with the Wall-Mount Bracket.
8 Prepare the paper template. (5-2)
1. Refer to the following “TV installation
dimensions table” and mark the TV outline
on the template.
2. Tape the template to the wall as
instructed in the manual provided with the
Wall-Mount Bracket.
Follow the instruction manual provided
with the Wall-Mount Bracket to complete
the installation. (5-3 through 6)
Precautions
1 Remove the four screws, and be
sure to store them in a safe place,
keeping them away from children.
2 Place the four
spacers (supplied).
19
GB
Additional Information
TV installation dimensions table
Unit: mm
Figures in the above table may differ slightly depending on the installation.
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of
the TV. Refer to “Specifications” (page 13) for its weight.
Model Name
KDL-
Display
dimensions
Screen centre
dimension
Length for each mounting angle
Angle (0°) Angle (20°)
AB C DEFGH
52LX900
1,261 804 13 434 75 390 753 495
Screen centre point
WARNING
20
GB
Safety
Information
Installation/Set-up
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Installation
• The TV set should be installed near an
easily accessible AC power outlet.
• Place the TV set on a stable, level surface
to avoid it from falling down and cause
personal injury or damage to the TV.
• Only qualified service personnel should
carry out wall installations.
• For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
– Wall-mount bracket
SU-WL50B
SU-WL500 (KDL-60LX900 only)
SU-WL700 (except KDL-
60LX900)
– Wall-hanging bracket
SU-WH500
• Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
Transporting
• Before
transporting the
TV set,
disconnect all
cables.
• Two or three
people are
needed to
transport a large
TV set.
• When transporting the TV set by hand,
hold it as shown on the right. Do not put
stress on the LCD panel and the frame
around the screen.
• When lifting or moving the TV set, hold
it firmly from the bottom.
• When transporting the TV set, do not
subject it to jolts or excessive vibration.
• When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
Ventilation
• Never cover the ventilation holes or
insert anything in the cabinet.
• Leave space around the TV set as shown
below.
• It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
Installed on the wall
Installed with stand
• To ensure proper ventilation and prevent
the collection of dirt or dust:
– Do not lay the TV set flat, install
upside down, backwards, or
sideways.
– Do not place the TV set on a shelf,
rug, bed or in a closet.
– Do not cover the TV set with a
cloth, such as curtains, or items
such as newspapers, etc.
– Do not install the TV set as shown
below.
AC power cord
Handle the AC power cord and outlet as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
– Use only Sony supplied AC power
cords, not those of other brands.
– Insert the plug fully into the AC power
outlet.
– Operate the TV set on a 220–240 V AC
supply only.
– When wiring cables, be sure to unplug
the AC power cord for your safety and
take care not to catch your feet on the
cables.
– Disconnect the AC power cord from
the AC power outlet before working on
or moving the TV set.
– Keep the AC power cord away from
heat sources.
– Unplug the AC power plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which could
result in a fire.
Notes
• Do not use the supplied AC power cord
on any other equipment.
• Do not pinch, bend, or twist the AC
power cord excessively. The core
conductors may be exposed or broken.
• Do not modify the AC power cord.
• Do not put anything heavy on the AC
power cord.
• Do not pull on the AC power cord itself
when disconnecting the AC power cord.
• Do not connect too many appliances to
the same AC power outlet.
• Do not use a poor fitting AC power
outlet.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
Environment:
Places that are hot, humid, or excessively
dusty; where insects may enter; where it
might be exposed to mechanical vibration,
near flammable objects (candles, etc). The
TV set shall not be exposed to dripping or
splashing and no objects filled with liquids,
such as vases, shall be placed on the TV.
Situation:
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from AC power
outlet and antenna during lightning storms.
Mounting Hook
Hook attachment on rear
of TV set
Screw (supplied with the
Wall-mount bracket)
8 mm - 12 mm
30 cm
10 cm 10 cm
10 cm
Leave at least this space around
the set.
30 cm
10 cm
6 cm
Leave at least this space around
the set.
10 cm
Air circulation is blocked.
Wall Wall
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
他の言語で
- English: Sony KDL-52LX900 User manual