Gigabyte GA-K8U-939 インストールガイド

Serial ATA(ULi M1689)...................................................................... 2

(1)SATA...................................................................................................................2

(2)BIOS SATA..............................................3

(3)RAID BIOSRAID.......................................................................................5

(4)SATA......................................................11

(5)SATA...................................................................13

ULi M1689 - 2 -

Serial ATA(ULi M1689)

SATA

(1)SATA

(2)BIOS SATA

(3)*RAID BIOSRAID

(4)SATA

(5)SATA

(a)SATA(SATA

RAID)

(b)

(c)Windows XP 2000

(d)

(1)SATA

SATA SATA SATA

(SATA

SATA0_SB/SATA1_SB)

"*"RAID

ULi M1689- 3 -

(2)BIOS SATA

BIOS SATA

1BIOS POST (Power-On Self Test)<Del>

BIOSCMOS SETUPRAIDIntegrated PeripheralsOnChip

SATA ModeRAID (RAID)RAIDIDE(

Integrated Peripherals

OnChip Audio[Enabled]

OnChip SATA[Enabled]

OnChip SATA Mode[RAID]

On-Chip Primary IDE[Enabled]

On-Chip Secondary IDE[Enabled]

IDE DMA transfer access [Enabled]

Onboard H/W LAN [Enabled]

USB 1.1 Controller [Enabled]

USB Keyboard Support[Disabled]

USB Mouse Support[Disabled]

USB 2.0 Controller [Enabled]

Onboard Serial Port 1[3F8/IRQ4]

Onboard Serial Port 2[2F8/IRQ3]

UART Mode Select[Normal]

xUR2 Duplex ModeHalf

Onboard Parallel Port[378/IRQ7]

Parallel Port Mode[PRINTER]

Game Port Address [201]

Midi Port Address [Disabled]

higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help

F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults

Item Help

Menu Level}

BIOS

ULi M1689 - 4 -

First Boot Device CDROMCD-ROM(3)

Advanced BIOS Features

}Hard Disk Boot Priority[Press Enter]

First Boot Device [CDROM]

Second Boot Device [Hard Disk]

Third Boot Device [CDROM]

Password Check[Setup]

higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help

F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults

Item Help

Menu Level}

BIOS

2Advanced BIOS Features Hard Disk Boot Priority

Microsoft Windows 2000/XP SATA(2)

Hard Disk Boot Priority

1. SCSI-0 :ST3120026AS

2. SCSI-1 :ST3120026AS

3. Bootable Add-in Cards

hi: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit

Item Help

Menu Level }}

Use <h> or <i> to

select a device, then

press <+> to move it

up, or <-> to move it

down the list. Press

<ESC> to exit this

menu.

ULi M1689- 5 -

(3)RAID BIOSRAID

SATARAID BIOS SATA RAID RAID

1BIOS POST (Power-On Self Test)

(4)<Ctrl + A>ALi RAID BIOS

<Ctrl + A>RAID BIOS Setup Utility(5)<h> <i>

ALi RAID BIOS V1.04 (M5289)

Indentifying IDE drives .o.o.

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

Press Ctrl-A to enter ALi RAID BIOS setup utility ...

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

ULi M1689 - 6 -

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

RAID BIOS(Main Menu) (Drive Select Menu)

(RAID Array List) (6)

1. RAID 0 (Create RAID 0 Striping for Performance)

Create RAID 0 Striping for Performance Enter

SRAID 0RAID 0

sRAID 0(7)

(Main Menu)

(Drive Select Menu)(RAID Array List)

"Data on RAID Drives will be deleted (Y/N)?" [RAID

(Y/N?)]YRAID

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

Select Stripe Drives

RAID 0

ULi M1689- 7 -

0-9A-Za-z

(8)

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

Input RAID Name (8 characters) : ALi_RAID

RAID(9)

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :240 GB0 64K ALi_RAID

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

Stripe Size ( ) RAID 0

64KByte 32KByte 16KByte( ) 8KByte

4KByteRAID 0A/V

64KByte

ULi M1689 - 8 -

2. RAID 1 (Create RAID 1 Mirroring for Reliability)

Enter on Create RAID 1 Mirroring for ReliabilityEnter

MRAID 1( ) RAID 1

mRAID 1( ) ( 10)

"Create RAID 1 (Y/N)?" [RAID 1 (Y/N)?]Y

RAID

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

Select Stripe Drives

RAID 1

0-9A-Za-z

"Duplicate Data from M to m (Y/N)?" [M m (Y/N)?](

11)YM m M

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

Duplicate Data from M to m (Y/N) ?

ULi M1689- 9 -

RAID(12)

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :120034 MB1ALi_RAID

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

3. JBOD (Create JBOD for integrated Capacity)

Create JBOD for integrated CapacityEnterJ

JBODJBODEnter

JBOD(13)JBOD4 2

SPACE:Select

h, i:Moving Cursor

Enter:Select & Finish

ESC:Exit

Drive ModelModeCapacityRAID Array/Type

Channel 1 Master : ST3120026AS SATA 1 120034 MB

Channel 2 Master : ST3120026AS SATA 1 120034 MB

CapacityRAID TypeStripe Size RAID Name

RAID Array A :

RAID Array B :

RAID Array C :

Create RAID 0 Striping for Performance

Create RAID 1 Mirroring for Reliability

Create JBOD for integrated Capacity

Stripe Size 64K

Delete RAID Settings & Partition

Delete All RAID Settings & Partition

Rebuild RAID Array

Select JBOD Drives

"Data on RAID Drives will be deleted (Y/N)?" [RAID

(Y/N?)]YRAID0-9A-Za-z

RAID

JBOD

ULi M1689 - 10 -

4. RAID(Delete RAID Settings & Partition)

RAID BIOSDelete RAID Setting & Partition

Delete RAID Settings & Partition EnterE

"Data on RAID Drives will be deleted (Y/N)?" [RAID

(Y/N?)]Y

5. RAID(Delete All RAID Settings & Partition)

Delete All RAID Settings & Partition Enter"Data on RAID Drives will be deleted (Y/

N)?" [RAID(Y/N?)]Y

6. RAID(Rebuild RAID Array)

RAID 1BIOS

Rebuild RAID Array

Rebuild RAID Array EnterR

RAID 1(M) ( m)

"Duplicate Data from M to m (Y/N)?" [M m (Y/N)?]

M m Y

ESCALi RAID BIOS

ULi M1689- 11 -

(4)SATA

Microsoft Windows 2000/XP SATA

SATA

2(D:) ( 14)

BootDrvMENU.

EXE(15)

ULi M1689 - 12 -

MENU.EXE MS-DOS(16)

49ULi SATASATA

5(17)0SATA

ULi M1689- 13 -

Windows Setup

Press F6 if you need to install a 3rd party SCSI or RAID driver.

(5)SATA

SATA BIOS

Microsoft Windows 2000 XP SATA(Microsoft Windows XP

)

1Microsoft Windows XP Press F6 if you

need to install a 3rd party SCSI or RAID driver<F6>(18)

2SATA<S>(19)

Windows Setup

S=Specify Additional Device ENTER=Continue F3=Exit

Setup could not determine the type of one or more mass storage devices installed

in your system, or you have chosen to manually specify an adapter.

Currently, Setup will load support for the following mass storage devices(s)

<none>

* To specify additional SCSI adapters, CD-ROM drives, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

ULi M1689 - 14 -

3ALi SATA RAID Controller(M5289, Windows XP/Server 2003)*

<Enter>(20)SATA

SATA

"*"

4<Enter>SATA1

Windows Setup

S=Specify Additional Device Enter=Continue F3=Exit

Setup will load support for the following mass storage device(s):

ALi SATA RAID Controller(M5289, Windows XP/Server 2003)

* To specify additional SCSI adapters, CD-ROM drives, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

Windows Setup

ENTER=Select F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

ALi SATA RAID Controller(M5289, Windows XP/Server 2003)

ALi SATA RAID Controller(M5289, Win2000)

ALi SATA RAID Controller(M5289, Windows XP/Server 2003 AMD 64-bit Edition)

ULi M1689- 15 -

SATA(22)<ENTER>

Microsoft Windows XP

WindowsXP Professional

Microsoft(R)

Windows (R) XP

Windows XP

indows XP

ENTER=R=F3=

Gigabyte GA-K8U-939, GA-K8U インストールガイド

関連論文