AW00156101099 Basler boost CXP-12 Starter Kit
1 Introduction
This document lists the components that are included in the
Basler boost CXP-12 Starter Kit. These components are
required for operating a Basler boost CXP-12 camera and
are designed for use with this camera model only.
This document does not include detailed specifications and
information about installing and using the components. This
information is available in the user documentation indicated
in Chapter 4 of this document.
2 Starter Kit Contents
The contents of the starter kit is shown in the figure and the
table above. Most components can also be ordered
individually (see order numbers in the table).
Note that the Basler boost CXP-12 camera and CXP-12
interface card are not included in the starter kit. They are
shown for reference only.
3 Precautions
4 Further Information
You can download related documentation free of charge
from the Basler website: www.baslerweb.com
The Basler Product Documentation (AW001406)
provides Information about installing and using the
Basler boost CXP-12 camera.
Installation is explained in detail in the Quick Install
Guide Basler boost CXP-12 (AW001553).
Specifications for most components are also available
for download.
1简介
本文档列出了 Basler CXP-12 Starter Kit 中包含的组件。
这些组件是操作 Basler boost CXP-12 相机时的必需品,且
专门设计用于仅支持本相机型号。
本文档不包含关于安装和使用组件的详细规范和信息。如需
查阅这些信息,请参阅本文档第 4 章中提及的用户文档。
2 入门套件内容
本入门套件的内容如上图及上表所示。大多数组件也可单独
订购(请参阅表中的订单号)。
请注意,Basler boost CXP-12 相机和 CXP-12 接口卡均不
包含在该入门套件内。所展示的内容仅供参考。
3 预防措施
4 更多信息
您可以通过 Basler 网站免费下载相关文档,网址为:
www.baslerweb.com
Basler Product Documentation
(AW001406)
中提供了安
装和使用 Basler boost CXP-12 相机所需的信息。
有关详细的安装说明请见
Quick Install Guide Basler
boost CXP-12
(AW001553)。
有关大多数组件的规范也可供下载。
ENGLISH
NOTICE
A damaged cable can cause camera malfunction.
If the CXP data cable or power-I/O cable is damaged, the
camera may not operate as intended.
To avoid damaging the cables:
Don’t put heavy mechanical loads on the cable.
Don’t bend the cable beyond the specified minimum
radius.
Don’t pull on the cable to unplug it.
If a cable or cable plug is damaged, stop camera
operation and replace the cable.
NOTICE
An incorrect component can cause camera
malfunction.
Don’t modify any of the supplied components.
中文
注意事项
线材损坏可能会导致相机故障。
如果 CXP 数据线或 Power-I/O 线材损坏,相机可能无法
按预期操作。
为避免线材损坏:
请勿让线材的机械载荷过重。
请勿将线材折弯超出规定的最小半径。
请勿通过拽拉线材的方式将其拔出。
如果线材或线材接头损坏,请停止操作相机并更换线材。
注意事项
使用错误的组件可能会导致相机故障。
请勿修改任何原厂提供的组件。