Philips SP9886/36 ユーザーマニュアル

www.philips.com/support/ifu-lux

SP9883

SP9886

6

22

21

20

19

9

8

18

17

16

15

14

13

10

12

11

1

2

3

4

5

7

23

24

empty page before TOC

English 6

简体中文 39

English

6English

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that Philips

offers, register your product at

www.philips.com/welcome.

Please read this user manual, as it contains information

about the features of this shaver as well as some tips to

make shaving easier and more enjoyable.

General description (Fig. 1)

1 Protection cap for cleansing brush attachment

(SP9883 only)

2 Click-on cleansing brush attachment (SP9883 only)

3 Attachment holder (SP9883 only)

4 Supply unit

5 USB plug

6 Wireless Qi charging pad

7 Pouch

8 Quick Clean Pod

9 Quick Clean Pod Cartridge

10 Replacement reminder

11 Notification symbol

12 Cleaning reminder

13 Travel lock symbol

14 Battery charge indicator

15 Battery charge percentage

16 Personal comfort settings bar

17 Personal comfort settings increase button

18 Personal comfort settings decrease button

19 On/off button

20 Shaving unit with hair chamber

21 Click-on beard styler attachment (SP9883 only)

22 Comb for beard styler attachment (SP9883 only)

23 Click-on nose trimmer attachment (SP9886 only)

24 Click-on precision trimmer attachment (SP9886 only)

The accessories supplied may vary for different products.

The box shows the accessories that have been supplied

with your appliance.

7

English

Important safety information

Read this important information carefully before you use

the appliance and its accessories and save it for future

reference. The accessories supplied may vary for different

products.

Warning

- Keep the supply unit dry.

- This shaver is waterproof. It is suitable for use in the

bath or shower and for cleaning under the tap.

- The appliance is a Class III construction.

- Never immerse the charging pad in water, nor rinse it

under the tap.

- Always make sure the charging pad is completely dry

before you connect it to the wall socket.

- Do not use a USB extension cord.

- This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without

supervision.

- Do not use a damaged appliance. Replace damaged

parts with new Philips parts.

- The charging pad is not intended for use in a car. It

may interfere with the automotive electronic systems.

- Because of hygiene, only one person should use the

appliance.

8English

- Only use cold or lukewarm water to clean the

appliance.

- Never use compressed air, scouring pads, abrasive

cleaning agents or aggressive liquids to clean the

appliance.

- Do not put the appliance or any part in the

dishwasher.

- Water may drip from the socket at the bottom of the

shaver when you rinse it. This is normal and not

dangerous because all electronics are enclosed in a

sealed power unit inside the shaver.

- Do not use the supply unit in or near wall sockets that

contain an electric air freshener to prevent irreparable

damage to the supply unit.

- Remove piercings, jewelry, glasses etc. before using

the appliance.

- Do not use the cleansing brush on chapped skin, open

wounds, healing wounds, skin recovering from

surgery or if you suffer from a skin disease or severe

skin irritation, such as severe acne, sunburn, skin

infection, skin cancer, inflammation, eczema,

psoriasis, nylon allergy etc.

- Do not use the cleansing brush if you take steroid-

based medication.

- Only use original Philips accessories or consumables.

Only use detachable supply unit HQ87 and charging

pad HQ8510.

- Charge, use and store the product at a temperature

between 5°C and 35°C.

- Keep product and batteries away from fire and do not

expose them to direct sunlight or high temperatures.

- If the product becomes abnormally hot or smelly,

changes color or if charging takes longer than usual,

stop using and charging the product and contact

Philips.

- Do not place products and their batteries in

microwave ovens or on induction cookers.

- Do not open, modify, pierce, damage or dismantle the

product or battery to prevent batteries from heating

up or releasing toxic or hazardous substances. Do not

short-circuit, overcharge or reverse charge batteries.

9

English

- If batteries are damaged or leaking, avoid contact

with the skin or eyes. If this occurs, immediately rinse

well with water and seek medical care.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable

standards and regulations regarding exposure to

electromagnetic fields.

Caution

- If your shaver comes with a cleaning system, always

use the original Philips Quick Clean Pod cartridge.

- Always place the cleaning system on a stable, level

and horizontal surface to prevent leakage.

- Always make sure the cartridge compartment is

closed before you use the cleaning system.

- When the cleaning system is ready for use, do not

move it to prevent leakage of cleaning fluid.

Danger

Philips Quick Clean Pod Cartridge fluid

- Do not swallow.

- Keep out of reach of children.

The display

Note: Remove any sticker or protective foil from the

display before using the product.

Charging

When the shaver is charging, the ring on the pad lights

up and the battery charge indicator on the shaver flashes

white.

The battery charge is indicated by the battery charge

percentage flashing on the display, which is shown when

the shaver is moved.

Quick charge: After approx. 18 minutes charging, the

appliance contains enough energy for one shave.

10 English

Battery fully charged

When the battery is fully charged, the battery charge

indicator and the ring on the pad light up white

continuously.

Note: Both lights switch off automatically after 15

minutes.

The battery charge percentage lights up white

continuously, which is shown when the shaver is moved.

Battery low

When the battery is almost empty, the battery charge

indicator flashes orange and the shaver beeps. At this

point there is enough energy left for one shave..

Remaining battery charge

The remaining battery charge is indicated by the battery

charge percentage shown on the display.

Personal comfort settings

The shaver has a feature that allows you to personalize

your settings. Depending on your personal shaving

needs, choose between three settings, from low to high:

comfort, dynamic or efficiency. When you press the

button on the left or right of the display, the segment of

the personal comfort settings bar lights up to indicate the

selected setting. To select a lower or higher setting, press

the button on the left or right of the display.

11

English

Cleaning reminder

Clean the shaver after every use for optimal performance

(see 'Cleaning and maintenance'). When you switch off

the shaver, the cleaning reminder flashes to remind you

to clean the shaver.

Travel lock

3 sec.

When you are going to travel, you can lock the shaver to

prevent it from accidentally switching on (see 'Activating

the travel lock').

Replacement reminder

For maximum shaving performance, replace the shaving

heads every two years. The shaver is equipped with a

replacement reminder which reminds you to replace the

shaving heads. The shaver beeps, the replacement

reminder lights up and the arrows flash to indicate that

you have to replace the shaving heads.

Note: After replacing the shaving heads, you can reset

the replacement reminder by pressing the on/off button

for 7 seconds. If you do not reset the replacement

reminder, the shaver resets automatically after 9 shaves.

Notification symbol

Overheating

If the shaver overheats during charging, the notification

symbol flashes. When this happens, the shaver stops

charging automatically. Charging continues once the

temperature of the shaver has decreased to the normal

level after approx. 10 minutes.

12 English

Blocked shaving heads

If the shaving heads are blocked, the notification symbol

continuously lights up red. The replacement reminder

and the cleaning reminder alternately flash white and the

shaver beeps. In this case, the motor cannot run because

the shaving heads are dirty or damaged. If the shaving

heads are dirty, you have to clean them. If the shaving

heads are damaged, you have to replace them.

Foreign object on wireless Qi charging pad

If there is a foreign (metal) object on the wireless Qi

charging pad during charging, the notification symbol on

the wireless Qi charging pad lights up. The wireless Qi

charging pad switches off automatically and restarts 5

minutes after the foreign object has been removed.

Do not place any foreign (metal) objects on the

wireless Qi charging pad. Only use the wireless Qi

charging pad to charge the shaver or another device

(e.g. smartphone) compliant with Qi charging.

Charging

Charge the shaver before you use it for the first time and

when the display indicates that the battery is almost

empty.

Charging takes approx. 3 hours. A fully charged shaver

has a shaving timeof up to 60 minutes.

After approx. 18 minutes of charging the shaver contains

enough power for one shave.

Note: You cannot use the shaver while it is charging.

Quick charge

After approx. 18 minutes of charging the shaver contains

enough power for one shave.

13

English

Charging with the wireless Qi charging pad

Note: The charging pad is Qi compliant. Only charge the

Qi compatible shaver or other Qi charging compliant

appliances on the wireless Qi charging pad provided.

Note: Carefully shake off excess water before placing the

shaver on the Qi pad.

1Put the USB plug in the supply unit supplied.

2

1

2Put the supply unit in the wall socket.

Place the shaver on the cross mark of the wireless Qi

charging pad. Make sure the shaver fits into the cavity

of the wireless Qi charging pad.

Only charge the shaver on the provided wireless Qi

charging pad.

- The wireless Qi charging pad beeps and the ring on

the pad lights up when the shaver is correctly placed

and connected for charging.

- When the shaver is charging, the ring on the pad

lights up and the battery charge indicator on the

shaver flashes white. The battery charge is indicated

by the battery charge percentage flashing on the

display, which is shown when the shaver is moved.

3When the battery is fully charged, the battery charge

indicator and the ring on the pad light up white

continuously. Both lights switch off automatically

after 15 minutes.

14 English

Using the shaver

Always check the shaver and all accessories before

use. Do not use the shaver or any accessory if it is

damaged, as this may cause injury. Always replace a

damaged part with one of the original type.

This symbol indicates that the shaver can be used in the

bath or shower.

- Use this shaver for its intended household use as

described in this manual.

- For hygienic reasons, the shaver should only be used

by one person.

- Trimming is easier when the skin and hair are dry.

Note: This shaver is waterproof. It is suitable for use in the

bath or shower and for cleaning under the tap. For safety

reasons, the shaver can only be used without cord.

Switching the shaver on and off

1To switch on the shaver, press the on/off button once.

The battery charge percentage lights up for a few

seconds.

2To switch off the shaver, press the on/off button once.

The battery charge percentage lights up for a few

seconds and shows the remaining battery charge.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you expect

and your skin may even become slightly irritated. This is

normal. Your skin and beard need time to adapt to any

new shaving system. To allow your skin to adapt to this

new appliance, we advise you to shave regularly (at least

3 times a week) and exclusively with this appliance for a

period of 3 weeks.

Shaving tips

- For the best results on skin comfort, pre-trim your

beard if you have not shaved for 3 days or longer.

- Select your personal comfort setting (see 'Personal

comfort settings').

15

English

Dry shaving

1Switch on the shaver.

2Move the shaving heads over your skin in circular

movements to catch all hairs growing in different

directions. Make sure each shaving head is fully in

contact with the skin. Exert gentle pressure for a close,

comfortable shave.

Note: Do not press too hard, as this can cause skin

irritation.

3Switch off and clean the shaver after each use (see

'Cleaning and maintenance').

The display lights up for a few seconds to show the

remaining battery charge.

Wet shaving

For a more comfortable shave, you can also use this

appliance on a wet face with shaving foam or shaving

gel.

1Apply some water to your skin.

2Apply shaving foam or shaving gel to your skin.

3Rinse the shaving unit under the tap to ensure that

the shaving unit glides smoothly over your skin.

4Switch on the shaver.

16 English

5Move the shaving heads over your skin in circular

movements to catch all hairs growing in different

directions. Make sure each shaving head is fully in

contact with the skin. Exert gentle pressure for a close,

comfortable shave.

Note: Do not press too hard, as this can cause skin

irritation.

Note: Rinse the shaving unit regularly to ensure that it

continues to glide smoothly over your skin.

6Dry your face.

7Switch off the shaver and clean it after each use.

Note: Make sure that you rinse all foam or shaving gel off

the shaver.

Using click-on attachments

It is recommended not to use the click-on cleansing brush

attachment directly after shaving to prevent skin

irritation.

Removing or attaching click-on attachments

1Make sure the shaver is switched off.

2Pull the attachment straight off the shaver.

Note: Do not twist the attachment while you pull it off

the shaver.

3Insert the lug of the attachment into the slot in the

top of the shaver. Then press down the attachment to

attach it to the shaver (‘click’).

Attachment holder

Note: Attach the click-on cleansing brush attachment on

the attachment holder first, before you place the

attachment onto the appliance.

17

English

1Place the click-on attachment onto the attachment

holder until it locks into position with a click.

Using the beard styler attachment with comb

You can use the beard styler with the comb attached to

style your beard at one fixed setting, but also at different

length settings. You can also use it to pre-trim any long

hairs before shaving for a more comfortable shave.

Note: The beard styler is only intended for trimming facial

hair. Do not use on areas below the neck.

The length settings on the beard styler attachment

correspond to the remaining hair length after cutting and

range from 1 to 5mm (3/64 - 3/16in).

1Attach the attachment to the appliance ('click').

2Slide the comb straight into the guiding grooves on

both sides of the beard styler attachment (‘click’).

1

2

3Press the length selector and then push it to the left or

right to select the desired hair length setting.

4Switch on the appliance.

18 English

5Move the appliance upwards while you exert gentle

pressure. Make sure the front of the comb is in full

contact with the skin.

6Clean the attachment after use.

Using the beard styler attachment without comb

You can use the beard styler attachment without the

comb to contour your beard, moustache, sideburns or

neckline at a length of 0.5mm (1/32in).

Note: The beard styler is only intended for trimming facial

hair. Do not use it on areas below the neck.

1Pull the comb off the beard styler attachment.

Note: Grab the comb in the center to pull it off the

beard styler attachment. Do not pull at the sides of

the comb.

2Switch on the appliance.

3Hold the beard styler attachment perpendicular to the

skin and move the appliance downwards while you

exert gentle pressure.

4Clean the attachment after use.

Using the cleansing brush attachment

Note: For better shaving results, use the click-on

cleansing brush attachment before shaving.

Use the rotating cleansing brush with your daily cleansing

cream. The cleansing brush removes oil and dirt,

contributing to a healthy and oil-free skin. We advise you

to use it no more than twice a day. Start with the lowest

personal comfort setting to familiarize yourself with the

attachment.

Do not use the appliance on damaged or irritated skin

or on wounds.

19

English

1Place the attachment on the attachment holder.

2Attach the attachment to the appliance (‘click’).

3Moisten the attachment with water.

Note: Do not use the appliance with a dry cleansing

brush attachment, as this can irritate the skin.

4Moisten your face with water and apply a cleanser to

your face.

5Place the attachment on your cheek.

6Switch on the appliance.

20 sec.

7Gently move the brush across your skin from the nose

towards the ear. Do not push the brush too hard onto

the skin to make sure that the treatment remains

comfortable.

Note: Do not cleanse the sensitive area around your

eyes.

20 sec.

8After approx. 20 seconds, move the appliance to your

other cheek and start cleansing this part of your face.

20 English

20 sec.

9After approx. 20 seconds, move the appliance to your

forehead and start cleansing this part of your face.

Gently move the brush head from left to right.

Note: We advise you to not overdo the cleansing and

to not cleanse any zone longer than 20 seconds.

10 Switch off the appliance and clean the attachment

after use.

11 After the treatment, rinse and dry your face. Your face

is now ready for the next step of your daily skincare

routine.

Using the precision trimmer attachment

You can use the precision trimmer attachment to touch

up your beard, sideburns and moustache.

1Attach the attachment to the appliance (‘click’).

2Switch on the appliance.

3Hold the precision trimmer perpendicular to the skin

and move it downwards while exerting gentle

pressure.

4Switch off the appliance and clean the attachment

after use.

Using the nose/ear trimmer attachment

You can use the nose/ear trimmer attachment to trim

your nose and/or ear hair.

Trimming nose hair

When trimming nose hair, make sure your nostrils are

clean.

ページを読み込んでいます...

Philips SP9886/36 ユーザーマニュアル

Philips SP9886/36 ユーザーマニュアル

他の言語で