2. Kyosho
  3. MDW101 Inner Tube Shock Set
MDW101 Inner Tube Shock Set

Kyosho MDW101 Inner Tube Shock Set, MDW101@Inner Tube Shock Set, MDW101�@Inner Tube Shock Set ユーザーマニュアル

  • こんにちは！京商 MINI-Z AWD MA-010 インナーチューブダンパーセットの取扱説明書を読み終えました。この説明書には、製品の機能、使用方法、調整方法などの情報が記載されています。製品に関するご質問がありましたら、お気軽にお尋ねください！
  • ダンパーオイルを柔らかくするとどうなる？
    スプリングのテンション調整はどうすれば良い？
    空気調整ビスで何ができるの？
    空気穴を全閉にするとどうなる？
A4
1
2
MDW101-T01
R
THE FINEST RADIO CONTROL MODELS
Before beginning assembly, please read these instructions thoroughly!
for MINI-Z AWD MA-010
Inner Tube Shock Set
Thank you for purchasing this set. Before installation,
please carefully read and follow the instructions on
this sheet in conjunction with the instruction manual
in your MINI-Z AWD MA-010.
Be sure to remove the battery before
assembling or disassembling the chassis.
CAUTION
2
1
*A Phillips Screwdriver (Precision type or a small sized)
Tools : Must be prepared
Assemble left and right
sides the same way.
Must be purchased
separately!
Symbols used throughout the instruction sheet.
INSTRUCTION SHEET
No.MDW101
This product absorbs the vibration of the double wishbone rear suspension system of the
Mini-Z AWD and greatly stabilizes the chassis. The spring tension and the ride height can be
adjusted to the condition of the road surface using the optional spring set (No.MDW100-01) and
the spring spacers included in the double wishbone suspension kit.
Remove the rear damper
Assemble the shocks
Apply grease or oil to shaded section (refer to optional parts list).
Vary the amount of grease or oil to adjust damping effects.
Softer oil results in more understeer (doesn't turn as sharply),
and the chassis behaviour will become unstable.
2x8mm
2x8mm
1x3mm
2
1 x 3mm
Screw
Push until it snaps in.
4
2 x 8mm
TP Screw
+
+
TP
A4
3
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
OPTIONAL PARTS LIST
FOR JAPANESE MARKET ONLY.
TP
© Copyright 2010 KYOSHO CORPORATION /
www.mini-z.jp/www.kyosho.com
31021010-1 PRINTED IN JAPAN
945
630
96506B
SIL30000
SIL20000
SIL10000
SIL40000
Ball Diff. Grease (15g)
Silicone Oil (20000)
Silicone Oil (10000)
Adjust the air screw
opens (loosens)
close (Tighten).
Higher rear tire grip but chassis posture is less stable.
Reduced rear tire grip but chassis posture is more stable.
Ventilation volume Rear Suspension
Large Soft
Small Hard
Soft
Hard
Effect
Silicone Oil (30000)
Silicone Oil (40000)
SIL50000
Silicone Oil (50000)
Control the shock’s performance by adjusting
the amount of setting grease used.
Control the shock’s performance
by adjusting the amount of setting
oil used.
945
MDW100
-01
Setting Suspension Spring
Set (for AWD DWS)
The spring set controls the hardness
of rear suspension.
Use only the Grease and Oil listed here.
No. Description Contents No. Description Contents
Install them under the spring
Airflow at the ventilation hole can be adjusted by opening and closing the airflow screw when silicone oil or grease is applied on the piston.
XXXXX
XXXXX
When the airflow screw is fully closed, air spring effect can be obtained.
Shutting the airflow screw “at the longest position” or “at the shortest position” of the inner tube shock will give different damping effect.
Air leaks in and out of the inner tube shock gradually even when the airflow screw is fully closed.
Spring tension can be adjusted using the spring spacers included
in the double wishbone suspension kit. (Standard: 1mm)
Install the damper
2x8mm
2x8mm
4
2 x 8mm
TP Screw
/