Important Notes About the CY-8
The CY-8 has had a slight modi cation. You can tell the di erence by looking at the “jack cover.” The diagram at illustrates the
di erences.
The chart below shows the parameters you need to adjust, relative to the module that you are using.
* For more details, please refer to the owner’s manual of the percussion module you are using.
CY-8
Percussion
sound module
Settings for the “New CY-8”
Settings for the “Old CY-8”
TD-4, TD-9
* In case that you DO see
“CY-12C” and “CY-13R” in
the trigger/pad types list.
Parameter Value Parameter Value
Trig Type/Pad Type CY-8
Trig Type/Pad Type CY-8
Sensitivity 12
Threshold 2
Curve LINEAR
Scan Time 2.0
Retrig Cancel 8
Mask Time 10
Rim Gain 1.1
Xtalk Cancel 10%
TD-4, TD-9
* In case that you do NOT
see “CY-12C” and “CY-13R”
in the trigger/pad types
list.
Parameter Value Parameter Value
Trig Type/Pad Type CY-12RC
Trig Type/Pad Type CY-8
Sensitivity 7
Threshold 2
Curve LINEAR
Scan Time 1.6
Retrig Cancel 8
Mask Time 10
Rim Gain 0.7
TD-20X, TD-20, TD-12,
SPD-30, HPD-10, HPD-15,
RMP-5, RMP-12
Parameter Value Parameter Value
Trig Type/Pad Type CY-12RC
Trig Type/Pad Type CY-8
Sensitivity 7
Threshold 2
Curve LINEAR
Scan Time 1.6
Retrig Cancel 8
Mask Time 10
Rim Gain 0.7
Copyright © 2010 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND
CORPORATION.
* 5 1 0 0 0 1 8 4 5 9 - 0 1 *
