No need for any actions.
The unit does not
start up.
Does the battery need to be
charged? Fully charge the battery
before use.
Check whether the POWER
ON/OFF button has been
turned on. Check whether no
massage function has been
selected.
Turn on the power switch.
Select a massage function.
Protection from overheat.
Turn off the power. Restart the
unit after a 30 minute break.
The rated operating time
has elapsed (15 minutes).
Turn off the power. Restart
the unit after a 10 minute break.
Sudden cease of
operation.
TroubleshootingCheck pointsProblem
Friction, air exhausting or
noise from the compressor
when the product is in use.
The noises occur from internal parts due to the mechanical
design when the product is in use. They will not have any effect
on the operation of the unit.
The noises occur from internal
parts due to the mechanical
design when the product is in
use. They will not have any
effect on the operation of
the unit.
