Daily facial cleansing with
VisaPure Essential
Cleansing procedure
Note: The appliance does not work
directly from the wall socket (Fig. 4).
Note: Do not use the brush head on
the sensitive skin around the eyes.
1 Push the brush head onto the
connection pin until it locks into
position with a click (Fig. 5).
2 Moisten your face with water
(Fig. 6) and apply a small amount
of cleanser to your face (Fig. 7).
3 Moisten the brush head with water
(Fig. 8). Do not use the appliance
with a dry brush head, as this can
irritate the skin.
4 Place the brush head on your skin.
5 Press the on/o button once to
switch on the appliance. Press twice
to switch o the appliance (Fig. 9).
Note: We advise you to not cleanse
your skin for longer than 1 minute,
to prevent overtreatment.
6 Gently move the brush head across
your skin from the nose towards the
ear (Fig. 10).
Do not push the brush head too
hard onto the skin to make sure the
treatment remains comfortable.
7 After the treatment, rinse and dry
your face.
Your face is now ready for the next
step of your daily skincare routine.
8 Clean the brush head with water.
Cleaning and maintenance
Never use scouring pads, abrasive
cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
Cleaning the appliance and the
brush head
Clean the appliance and the brush
head thoroughly with water after each
use, to ensure optimum performance.
Make sure the appliance is switched
o before you start cleaning it.
1 Rinse the handle and the brush
head under the tap with warm
water (max. 40°C/104°F (Fig. 11)).
2 Remove the brush head from the
appliance (Fig. 12).
Caution
- This appliance is developed and
intended for cleansing the face,
excluding the sensitive area around
the eyes. Do not use the appliance
for any other purpose.
- Do not use the appliance more than
twice a day.
- For hygienic reasons, we advise
you to not share the appliance with
other people.
- Do not clean the appliance with
water that is hotter than shower
temperature (max. 40°C/104°F).
- Do not put the appliance or any
part in the dishwasher.
- Charge, use and store the appliance
at a temperature between
10°C/50°F and 40°C/104°F.
- Do not use the appliance on
chapped skin, open wounds, or if
you suer from skin diseases or
skin irritations, such as severe acne,
sunburn, skin infection, etc.
- Do not use the appliance if you are
taking steroid-based medication.
- If you wear piercings on your face,
remove the piercings before you
use the appliance or make sure that
you do not use the appliance on or
near the piercings.
- If you wear jewelry or glasses,
take them o before you use the
appliance or make sure you do not
use the appliance on or near the
jewelry or glasses.
- Do not use the appliance with
self-made cleansers or cleansers
containing harsh chemicals or
rough particles.
- If you have sensitive skin or
experience skin irritation after using
the appliance with the normal brush
head, we advise you to switch to
the sensitive brush head available
separately.
- We advise you to not cleanse your
skin longer than 1 minute at a time,
to prevent overtreatment.
- Use a hairband or hair clips to
avoid your hair to get caught in the
rotating parts.
- VisaPure cleanses your skin deeply
and stimulates blood circulation. If
your skin is used to the treatment,
you may experience slight skin
reactions like redness or skin
tightness on occasion. If your skin
is not used to the treatment, these
reactions may be stronger and can
3 Clean the back of the brush head
and the connection pin of the
appliance under the tap at least
once a week (Fig. 11).
4 Open the socket cover, clean it with
a dry cloth and close it.
5 Dry these parts with a towel.
Cleaning the adapter
Danger: Always keep the adapter
dry. Never rinse it under the tap or
immerse it in water.
1 Make sure the adapter is unplugged
when you clean it. Only wipe it with
a dry cloth.
Charging the appliance
Charging the appliance takes
approximately 8 hours. A fully charged
appliance has a cordless operating
time of up to 20 minutes.
Note: The appliance cannot be used
directly from the wall socket (Fig. 4).
1 Make sure the appliance is
switched o.
2 Open the socket cover and insert
the small plug into the socket.
Put the adapter in the wall socket
(Fig. 14).
3 Charge the appliance. The charging
light lights up white continuously
to indicate that the appliance is
charging (Fig. 15).
Battery-low indication
- When the battery is almost empty,
the charging light lights up orange
for 15 seconds. The battery still
contains enough energy for a
complete treatment (Fig. 16).
Storage
- To store the appliance horizontally,
place it on the anti-roll ridge (Fig. 17).
- If you take the appliance with you
when you travel, put the protection
cap on the dry brush head to
protect the brush head laments
(Fig. 18).
Note: Never put the protection cap on
the brush head if the brush head is
still wet.
last longer, but should disappear
after some hours. To reduce these
skin reactions, you can shorten
the treatment time, reduce the
treatment frequency and/or apply
less pressure on the skin during
treatment. After 2 weeks of daily
usage, your skin should have
adapted to treatment with VisaPure.
However, if you still experience
strong skin reactions after 2 weeks
of daily usage, we advise you to
stop using VisaPure and give your
skin some time to recover. You can
continue your treatment once the
skin reactions have disappeared,
using reduced treatment time
and frequency. If the strong skin
reactions reoccur, we advise you to
contact your doctor.
Electromagnetic elds (EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
elds.
General
- Please note that the condition of
the skin varies throughout the year.
Facial skin can get dryer during
the winter season. In that case you
can reduce the treatment time or
frequency, depending on the needs
of your skin.
- The appliance cannot be used
directly from the wall socket.
- Regular cleaning of the appliance
ensures optimal results and a
longer lifetime for the appliance.
- The appliance complies with the
internationally approved IEC safety
regulations and can be safely used
in the bath or shower and cleaned
under the tap.
- The appliance is equipped with an
automatic voltage selector and is
suitable for mains voltages ranging
from 100 to 240 volts.
Using the appliance
You can either use the appliance in
front of the sink, in the shower or in the
bath. We advise you use VisaPure Men
Essential with your favorite cleanser.
You can cleanse your face with
VisaPure Men Essential twice a day.
Brush head replacement
Damaged brush heads or worn
laments could lead to skin irritation.
Therefore brush heads need to be
replaced every 3 months or earlier
if the laments are deformed or
damaged. Replacement brush heads
are available from our website
www.shop.philips.com/service or
from the shop where you purchased
your Philips VisaPure Men Essential.
If you have any diculties obtaining
replacement brush heads, please
contact the Philips Consumer Care
Center in your country. You nd its
contact details in the international
warranty. You can also visit
www.philips.com/support.
Other heads
If you like to know more about other
types of heads that are available for
specic skincare needs, please visit
www.philips.com/malegrooming
for information.
Recycling
- Do not throw away the product
with the normal household waste
at the end of its life, but hand it in
at an ocial collection point for
recycling. By doing this, you help to
preserve the environment.
- This product contains a built-in
rechargeable battery which shall
not be disposed of with normal
household waste. Please take your
product to an ocial collection
point or a Philips service center to
have a professional remove the
rechargeable battery.
- Follow your country’s rules for the
separate collection of electrical
and electronic products and
rechargeable batteries. Correct
disposal helps prevent negative
consequences for the environment
and human health.
Removing the rechargeable
battery
1 Switch on the appliance and let it
operate until it switches o because
the rechargeable battery is empty.
2 Open the socket cover and undo
the screw in the bottom of the
handle.