Dell PowerEdge M600 リファレンスガイド

Dell™ PowerEdge™

M1000e Systems

Configuration Guide

安装说明与重要信息

アップデート情報

정보 업데이트

R433Cbk0.book Page 1 Wednesday, July 30, 2008 6:05 PM

R433Cbk0.book Page 2 Wednesday, July 30, 2008 6:05 PM

Dell™ PowerEdge™

M1000e Systems

Configuration Guide

R433Cbk0.book Page 1 Wednesday, July 30, 2008 6:05 PM

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, PowerEdge, and Dell OpenManage are trademarks

of Dell Inc.; Microsoft, Windows, and Active Directory are either trademarks or registered trademarks

of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

August 2008 P/N R433C Rev. A00

R433Cbk0.book Page 2 Wednesday, July 30, 2008 6:05 PM

Contents 3

Contents

1 About Your System . . . . . . . . . . . . . . . . . . 7

System Overview . . . . . . . . . . . . . . . . . . . . . 7

System Control Panel Features

. . . . . . . . . . . . . 10

LCD Module

. . . . . . . . . . . . . . . . . . . . . . . 11

LCD Module Menus

. . . . . . . . . . . . . . . . 12

Back-Panel Features

. . . . . . . . . . . . . . . . . . 13

Blades

. . . . . . . . . . . . . . . . . . . . . . . . . . 13

CMC Module

. . . . . . . . . . . . . . . . . . . . . . . 16

CMC Daisy Chaining (Enclosure Stacking)

. . . . 17

iKVM Switch Module

. . . . . . . . . . . . . . . . . . 19

2 Initial System Configuration . . . . . . . . . . 21

Before You Begin . . . . . . . . . . . . . . . . . . . . 21

Power Requirements

. . . . . . . . . . . . . . . . 21

Network Information

. . . . . . . . . . . . . . . . 21

Initial Setup Sequence

. . . . . . . . . . . . . . . . . 21

Configuring the CMC

. . . . . . . . . . . . . . . . . . 22

Initial CMC Network Configuration

. . . . . . . . 22

Logging in to the CMC Using the Web-Based

Interface

. . . . . . . . . . . . . . . . . . . . . . 25

Adding and Managing CMC Users

. . . . . . . . . 26

R433Cbk0.book Page 3 Wednesday, July 30, 2008 6:05 PM

4 Contents

Configuring iDRAC Networking Using the

Web-Based Interface

. . . . . . . . . . . . . . . 27

Setting the First Boot Device for Servers

. . . . . 28

Configuring and Managing Power

. . . . . . . . . 28

Installing or Updating the CMC Firmware

. . . . . 29

Configuring the Optional iKVM Switch Module

. . . . 31

Enabling iKVM Access to the Dell CMC

Console

. . . . . . . . . . . . . . . . . . . . . . . 31

Updating the iKVM Firmware

. . . . . . . . . . . . 31

Tiering the Avocent iKVM Switch From an

Analog KVM Switch

. . . . . . . . . . . . . . . . 32

Tiering the Avocent iKVM Switch From a

Digital KVM Switch

. . . . . . . . . . . . . . . . . 33

Viewing and Selecting Servers

. . . . . . . . . . 34

FlexAddress

. . . . . . . . . . . . . . . . . . . . . . . 36

3 Configuring the I/O Modules . . . . . . . . . . 37

Overview . . . . . . . . . . . . . . . . . . . . . . . . . 37

Before You Begin

. . . . . . . . . . . . . . . . . . . . 39

Network Information

. . . . . . . . . . . . . . . . 39

Switch Modules

. . . . . . . . . . . . . . . . . . . . . 39

Configuring a Switch Module Network Ethernet

Port Using the Web-Based Interface

. . . . . . . 39

Cisco SFS M7000e Infiniband Switch Module

. . . 40

PowerConnect M6220 Ethernet Switch

Module

. . . . . . . . . . . . . . . . . . . . . . . 42

Cisco Ethernet Switch

. . . . . . . . . . . . . . . 43

Brocade M4424 SAN I/O Module

. . . . . . . . . 45

R433Cbk0.book Page 4 Wednesday, July 30, 2008 6:05 PM

Contents 5

Pass-through Modules . . . . . . . . . . . . . . . . . 47

Ethernet Pass-through Module

. . . . . . . . . . 47

Fibre Channel Pass-through Module

. . . . . . . 49

R433Cbk0.book Page 5 Wednesday, July 30, 2008 6:05 PM

6 Contents

R433Cbk0.book Page 6 Wednesday, July 30, 2008 6:05 PM

Configuration Guide 7

About Your System

System Overview

Your system can include up to 16 half-height blades (server modules), eight

full-height blades, or a mixture of the two blade types (see Figure 1-1,

Figure 1-2, and Figure 1-3). To function as a system, a blade is inserted into a

enclosure (chassis) that supports power supplies, fan modules, a Chassis

Management Controller (CMC) module, and at least one I/O module for

external network connectivity. The power supplies, fans, CMC, optional

iKVM module, and I/O modules are shared resources of the blades in the

enclosure.

R433Cbk0.book Page 7 Wednesday, July 30, 2008 6:05 PM

8 Configuration Guide

Figure 1-1. Blade Numbering – Half-Height Blades

12345678

910111213141516

R433Cbk0.book Page 8 Wednesday, July 30, 2008 6:05 PM

Configuration Guide 9

Figure 1-2. Blade Numbering - Full Height Blades

Figure 1-3. Blade Numbering - Mixed Full-Height and Half-Height Blades

12345678

13 14 15 16

R433Cbk0.book Page 9 Wednesday, July 30, 2008 6:05 PM

10 Configuration Guide

System Control Panel Features

Figure 1-4 shows the control panel features on the M1000e enclosure front

panel.

Figure 1-4. Control Panel Features

1 USB port (mouse only) 2 USB port (keyboard only)

3 video connector 4 system power button

5 system power indicator

NOTE: The USB and video ports are functional only if an optional iKVM module is

installed.

1

2

3

4

5

R433Cbk0.book Page 10 Wednesday, July 30, 2008 6:05 PM

Configuration Guide 11

LCD Module

The LCD module provides an initial configuration/deployment wizard, as

well as access to infrastructure and blade information and error reporting. See

Figure 1-5.

Figure 1-5. LCD Module

1 LCD screen 2 scroll buttons (4)

3 selection ("check") button

1

2

3

R433Cbk0.book Page 11 Wednesday, July 30, 2008 6:05 PM

12 Configuration Guide

LCD Module Menus

Main Menu

The Main Menu options include links to the Server Menu, the Enclosure

Menu, and the LCD Setup Menu.

LCD Setup Menu

You can change the default language and startup screen for the LCD menu

screens using this menu.

Server Menu

From the Server Menu dialog box, you can highlight each blade in the

enclosure using the arrow keys, and view its status.

• A blade that is powered off or booting is designated by a gray rectangle. An

active blade is indicated by a green rectangle. If a blade has errors, this

condition is indicated by an amber rectangle.

• To select a blade, highlight it and press the center button. A dialog box

displays the iDRAC IP address of the blade and any errors present.

Enclosure Menu

The Enclosure Menu includes options for Module Status, Enclosure Status,

and IP Summary.

•In the

Module Status

dialog box, you can highlight each component in the

enclosure and view its status.

– A module that is powered off or booting is designated by a gray

rectangle. An active module is indicated by a green rectangle. If a

module has errors, it will be indicated by an amber rectangle.

– If a module is selected, a dialog box displays the current status of the

module and any errors present.

•In the

Enclosure Status

dialog box, you can view the enclosure status, any

error conditions, and power consumption statistics.

•The

IP Summary

screen shows IP information for the CMC(s), and the

iDRAC of each installed server.

R433Cbk0.book Page 12 Wednesday, July 30, 2008 6:05 PM

Configuration Guide 13

Back-Panel Features

The back of the M1000e enclosure supports six I/O modules, one or two

CMC modules, an optional iKVM module, nine fan modules, and six power

supply modules. Figure 1-6 shows a fully configured enclosure.

Figure 1-6. Back-Panel Features

Blades

Figure 1-7 shows the front panel features on the M600 and M605 blades.

Figure 1-8 shows the front panel features on the M905 and M805 blades.

1 fan modules (9) 2 primary CMC module

3 I/O modules (6) 4 optional iKVM module

5 secondary CMC module 6 power supplies (6)

2

6

1

3

4

5

R433Cbk0.book Page 13 Wednesday, July 30, 2008 6:05 PM

14 Configuration Guide

Figure 1-7. Front Panel Features - PowerEdge M600 and M605

1 blade handle release button 2 hard drives (2)

3 blade status/identification indicator 4 USB connectors (2)

5 blade power button 6 blade power indicator

1

2

4

5

6

3

R433Cbk0.book Page 14 Wednesday, July 30, 2008 6:05 PM

Configuration Guide 15

Figure 1-8. Front Panel Features - PowerEdge M905 and M805

1 blade handle release button 2 hard drives (2)

3 blade status/identification indicator 4 USB connectors (3)

5 blade power button 6 blade power indicator

1

2

4

6

3

5

R433Cbk0.book Page 15 Wednesday, July 30, 2008 6:05 PM

16 Configuration Guide

CMC Module

Figure 1-9. CMC Module Features

The CMC provides multiple systems management functions for your

modular server, including the M1000e enclosure’s network and security

settings,

I/O module and iDRAC network settings, and

power redundancy and

power ceiling settings.

1 Ethernet connector Gb1 2 Ethernet connector STK (used for

daisy-chaining CMCs in separate

enclosures)

3 link indicator (2) 4 activity indicator (2)

5 DB-9 serial connector for local

configuration

6 optional secondary CMC (CMC 2)

7 primary CMC (CMC 1) 8 amber fault indicator

9 blue status/identification indicator 10 power indicator

4

3

2

1

5

8

9

10

6

7

R433Cbk0.book Page 16 Wednesday, July 30, 2008 6:05 PM

Configuration Guide 17

CMC Daisy Chaining (Enclosure Stacking)

CMC daisy chaining can be utilized to minimize the number of network

connections required for chassis (enclosure) management, such that only one

or two network connections (depending on whether or not redundant CMCs

are installled) are needed for up to four M1000e enclosures.

Cabling Guidelines

Follow these guidelines to daisy chain CMC modules from enclosure to

enclosure:

• CMC Ethernet port "GB1" is the "Uplink" port. It will uplink to either the

management network, or to receive a cable from the CMC Ethernet port

labeled "STK" in the adjacent enclosure.

The CMC Ethernet port labeled "STK" is the "daisy-chain" port. It will

only

connect to CMC port GB1 on the adjacent enclosure. Do not connect

this cable directly to the management network.

• Up to 4 enclosures can be daisy-chained.

• Enclosures can be daisy-chained in both redundant and non-redundant

deployments:

– In a redundant CMC deployment, cable all CMC modules in the CMC

primary slots together. Cable all CMC modules in the CMC secondary

slots together. Do not connect the primary daisy chain with the

secondary daisy chain (do not “cross cable” the two sets of CMCs).

– In a non-redundant CMC, cable all CMC modules in the CMC

primary slots together.

Figure 1-10 shows four enclosures with redundant CMC modules installed.

Primary CMC port GB1 in the first enclosure connects to the management

network. Primary CMC port GB1 in the adjacent enclosure is "uplinked” into

the port labeled "STK" on the primary CMC in the enclosure above it. No

cable is required in port STK on the fourth enclosure in line. The same

cabling scheme is valid for the daisy chain of CMC modules in the secondary

slot of the enclosures.

R433Cbk0.book Page 17 Wednesday, July 30, 2008 6:05 PM

18 Configuration Guide

Figure 1-10. CMC Daisy-Chaining – Enclosure With Redundant CMC Modules

1 Management network segment 2 CMC1 – cable from connector

Gb1 to network

3 CMC2 – cable from connector

Gb1 to network

1

3

2

R433Cbk0.book Page 18 Wednesday, July 30, 2008 6:05 PM

ページを読み込んでいます...

Dell PowerEdge M600 リファレンスガイド

関連論文

その他の書類