Bose SoundLink® wireless music system 取扱説明書

OWNER’S GUIDE • BRUGERVEJLEDNING

BEDIENUNGSANLEITUNG • GEBRUIKERSHANDLEIDING

GUÍA DEL USUARIO • KÄYTTÖOHJE • NOTICE D’UTILISATION

MANUALE DI ISTRUZIONI • KEZELÉSI ÚTMUTATÓ

BRUKERVEILEDNING • PODRĘCZNIK UŻYTKOWNIKA

BRUKSANVISNING • •

• • •

QUIETCOMFORT

®

35

2 - ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety and use instructions.

WARNINGS/CAUTIONS

• Do NOT use the headphones at a high volume for any extended period.

– To avoid hearing damage, use your headphones at a comfortable, moderate volume level.

– Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up

gradually until you reach a comfortable listening level.

• Do NOT use your headphones while driving for phone calls or any other purpose.

• Do NOT use the headphones with noise canceling on at any time the inability to hear surrounding sounds may present

a danger to yourself or others, e.g., while riding a bicycle or walking in or near trac, a construction site or railroad,

etc.

– Remove the headphones, or use the headphones with noise canceling o and adjust your volume, to ensure you can

hear surrounding sounds, including alarms and warning signals.

– Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the

headphones.

• Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones o and contact

Bose customer service.

• Remove headphones immediately if you experience a warming sensation or loss of audio.

• Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or

property damage due to overheating.

• Do NOT use the headphones as aviation communication headsets except in case of emergency.

– No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential

of missed communications while piloting an aircraft.

– Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive

incoming audio communications, particularly during takeo and climb out.

– The headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions

common in non-commercial aircraft, resulting in possible interference to critical communications.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might aect your implantable

medical device.

• To reduce the risk of ﬁre or electrical shock, do NOT expose this product to rain, liquids or moisture.

• Do NOT make unauthorized alterations to this product.

• Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL,

CSA, VDE, CCC).

• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, ﬁre or the like).

ENGLISH - 3

REGULATORY INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate this

equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation

This device complies with FCC and Industry Canada radiation exposure limits set forth for general population.

It must not be co-located or operating in conjunction with any other antenna or transmitter.

Meets IMDA Requirements.

CAN ICES-3 (B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the

NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original

characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If found,

the user shall cease operating immediately until no interference is achieved. The said legal communications means radio

communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other

relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete

declaration of conformity can be found at: www.Bose.com/compliance

For Europe:

Frequency band of operation 2400 to 2483.5 MHz:

Bluetooth: Maximum transmit power less than 20 dBm EIRP.

Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.

Please dispose of used batteries properly, following local regulations. Do not incinerate.

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human

health and the environment. For more information on disposal and recycling of this product,

contact your local municipality, disposal service, or the shop where you bought this product.

4 - ENGLISH

REGULATORY INFORMATION

Removal of the rechargeable lithium-ion battery in this product should be conducted only by a qualiﬁed

professional. Please contact your local Bose retailer or see products.bose.com/static/compliance/index.html

for further information.

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part

is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “8” is 2008 or 2018.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000

México, D.F. Phone Number: +5255 (5202) 3545

Use of the Made for Apple badge means that an accessory has been designed to connect speciﬁcally to the Apple

product(s) identiﬁed in the badge, and has been certiﬁed by the developer to meet Apple performance standards. Apple

is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Apple, the Apple logo, iPad, iPhone, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

Android, Google Play, and the Google Play logo are trademarks of Google LLC.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks

by Bose Corporation is under license.

The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

Bose Corporation Headquarters: 1-877-230-5639

written permission.

ENGLISH - 5

CONTENTS

Getting Started

Unpacking ............................................................................................................................ 7

Headphone components ................................................................................................ 8

Powering on your headphones .................................................................................... 9

The Bose

®

Connect App

Features ........................................................................................................................ 10

Charging the Battery

Connecting the USB cable ............................................................................................ 11

Checking the battery ....................................................................................................... 11

Headphone Status Indicators

Bluetooth® indicator ( ) ....................................................................................... 12

Battery indicator ( ) ............................................................................................. 12

Voice Prompts

Pre-installed languages .................................................................................................. 13

Changing the language .................................................................................................. 13

Bluetooth

®

About Bluetooth® wireless technology ..................................................................... 14

Choosing your pairing method ............................................................................ 14

Pairing your Bluetooth® device .................................................................................... 15

Pairing your Bluetooth® device with NFC ................................................................ 16

Disconnecting a Bluetooth® device ............................................................................ 17

Reconnecting a Bluetooth® device ............................................................................. 17

Noise Cancelling

About noise cancelling ................................................................................................... 18

Using noise cancelling only ................................................................................... 18

6 - ENGLISH

CONTENTS

Managing Multiple Connections

Switching between two connected Bluetooth® devices ............................ 19

Identifying connected Bluetooth® devices ...................................................... 19

Connecting a Bluetooth® device from the headphone pairing list ........ 19

Clearing the headphone pairing list .................................................................. 19

Headphone Controls

Media playback and volume functions ..................................................................... 20

Call functions ...................................................................................................................... 21

Connecting Headphones Using a Cable

Using the back-up audio cable .................................................................................... 22

Connecting to airline audio systems ......................................................................... 23

Connecting to dual output connectors ............................................................ 23

Connecting to a single output connector ....................................................... 23

Care and Maintenance

Storing your headphones .............................................................................................. 24

Cleaning your headphones ........................................................................................... 24

Replacement parts and accessories .......................................................................... 25

Limited Warranty .............................................................................................................. 25

Technical Information ...................................................................................................... 26

Serial Number Location .................................................................................................. 26

Troubleshooting ...................................................................................................... 27

ENGLISH - 7

GETTING STARTED

Unpacking

Carefully unpack the carton and conﬁrm that the following parts are included:

Bose® QuietComfort® 35 wireless headphones Carry case

USB charging cable Back-up audio cable Airline

adapter

If any part of the headphones appears to be damaged, do not attempt to use it.

Contact your authorized Bose dealer immediately or call Bose customer service.

For contact information, refer to the quick start guide in the carton.

8 - ENGLISH

GETTING STARTED

Headphone components

USB charging

connector

Headphone controls

Back-up

audio cable

connector

NFC touchpoint

Power/Bluetooth

button

(three-position)

Battery and

Bluetooth®

indicators

Microphone

ENGLISH - 9

GETTING STARTED

Powering on your headphones

Slide to the right.

The battery indicator glows green, amber, or red (to indicate the current battery

charge level). When powered on, noise cancelling is fully enabled.

Note: If the battery is depleted, you cannot use noise cancelling.

For more information on noise cancelling, see page 18.

10 - ENGLISH

THE BOSE® CONNECT APP

Enhance your headphones with the Bose® Connect app.

Features

• Unlock the full potential of your headphones.

• Free app compatible with most Apple and Android™ systems.

• Easily connect and switch between multiple Bluetooth® devices with a single swipe.

• Keep your headphones up-to-date with the latest software.

• Customize headphone settings, like voice prompt language and hibernation mode.

ENGLISH - 11

CHARGING THE BATTERY

Connecting the USB cable

1. Plug the small end of the USB cable into the micro-USB connector on the

right earcup.

2. Plug the other end into a USB wall charger or computer that is powered on.

While charging, the battery indicator blinks amber.

When the battery is fully charged, the battery indicator glows green. A full charge

powers the headphones for up to 20 hours when connected wirelessly and 40 hours

when connected with a wire.

Checking the battery

Each time you power on the headphones, the voice prompt announces the headphone

battery charge level. To visually check the battery, the indicator is l ocated on the right

earcup.

While the headphones are in use, the battery indicator blinks red when the

battery needs charging. For more information, see “Headphone Status Indicators” on

page 12.

If you are connected to an Apple device, the device displays the headphone battery

charge level near the upper right corner of the screen.

12 - ENGLISH

HEADPHONE STATUS INDICATORS

The battery and Bluetooth® indicators are located on the right earcup.

Bluetooth indicator

Battery indicator

Bluetooth® indicator ( )

Indicator activity System state

Blinking blue Ready to pair

Blinking white Connecting

Solid white (10 seconds) then

powers o

Connected

Battery indicator ( )

Indicator activity System state

Solid green Medium to full charge

Blinking amber Charging

Solid amber Low charge

Blinking red Need to charge

Solid red Charging error; out of temperature range

ENGLISH - 13

VOICE PROMPTS

Voice prompts guide you through the Bluetooth® pairing and connecting processes.

Pre-installed languages

• English • German • Korean • Swedish

• Spanish • Mandarin • Italian • Dutch

• French • Japanese • Portuguese

Check for additional languages

Additional languages may be available. To check for language updates,

download the Bose® Updater.

Visit: btu.Bose.com

Changing the language

1. Press and hold and simultaneously until you hear the voice prompt for the ﬁrst

language option.

2. Press or to scroll through the languages.

3. When you hear your language, press and hold to select.

14 - ENGLISH

BLUETOOTH®

About Bluetooth

®

wireless technology

Bluetooth® wireless technology lets you stream music from Bluetooth smartphones,

tablets, computers or other audio devices to your headphones. Before you can stream

music from a Bluetooth device, you must pair the device with your headphones.

Choosing your pairing method

You can pair your Bluetooth® device with your headphones using Bluetooth wireless

technology or Near Field Communication (NFC).

What is NFC?

NFC is a technology that enables Bluetooth devices to establish wireless communication

with each other by simply touching the devices together. Refer to your device owner’s

guide to see if your model supports NFC.

If your Bluetooth device does not support

NFC or if you are unsure:

Follow the instructions for Bluetooth pairing

on page 15.

If your device supports Bluetooth pairing

via NFC:

Follow the instructions for NFC pairing on

page 16.

Note: If your device supports Bluetooth pairing via NFC, you can use either

pairing method.

ENGLISH - 15

BLUETOOTH®

Pairing your Bluetooth

®

device

1. Slide the Power/Bluetooth® button ( ) to the Bluetooth® symbol ( ) and hold until

you hear “Ready to pair” or the Bluetooth indicator blinks blue.

2. On your Bluetooth device, turn on the Bluetooth feature.

Tip: The Bluetooth menu is usually found in the Settings menu.

3. Select your Bose® QuietComfort® headphones from the device list.

Once paired, you hear “Connected to <device name>” or the Bluetooth indicator

glows solid white.

16 - ENGLISH

BLUETOOTH®

Pairing your Bluetooth

®

device with NFC

1. Power on the headphones.

2. Unlock your device and turn on the Bluetooth® and NFC features. Refer to the

owner’s guide for your device to learn more about these features.

3. Tap the NFC touchpoint on your device to the NFC touchpoint on your headphones.

Your device may prompt you to accept pairing.

Once paired, you hear “Connected to <device name>” or the Bluetooth indicator

glows solid white.

ENGLISH - 17

BLUETOOTH®

Disconnecting a Bluetooth

®

device

• Turn o the Bluetooth

®

feature on your mobile device.

• If your device supports pairing via NFC, tap the NFC touchpoint on your device to the

NFC touchpoint on your headphones.

Note: When you disconnect your Bluetooth® device, noise cancelling

remains enabled.

Reconnecting a Bluetooth

®

device

• When powered on, the headphones try to reconnect with the two most recently con-

nected devices. Make sure the devices are within range and powered on.

• If your device supports Bluetooth® pairing via NFC, tap the NFC touchpoint on your

device to the NFC touchpoint on your headphones.

18 - ENGLISH

About noise cancelling

Noise cancelling reduces unwanted noise providing a clearer, more lifelike audio

performance. You can use noise cancelling while listening to audio, or you can use noise

cancelling only.

Using noise cancelling only

If you want to use noise cancelling only, disconnect your Bluetooth® device

(see page 17). You can also pause or stop audio (see “Headphone Controls” on page

20).

NOISE CANCELLING

ENGLISH - 19

MANAGING MULTIPLE CONNECTIONS

Your headphones can remember up to eight paired Bluetooth® devices in its pairing list

and can be actively connected to two devices at a time.

Note: You can only play audio from one device at a time.

Switching between two connected Bluetooth® devices

1. Pause audio on your ﬁrst Bluetooth device.

2. Play audio on your second Bluetooth device.

Identifying connected Bluetooth® devices

Slide to and release to hear which device is currently connected.

Connecting a Bluetooth® device from the headphone

pairing list

1. Slide to and release to hear which device is connected.

2. Within two seconds, slide to and release again to connect to the next device in

the headphone pairing list. Repeat until you hear the correct device name.

3. Play audio on the connected Bluetooth device.

Clearing the headphone pairing list

1. Slide to and hold for 10 seconds, until you hear “Bluetooth® device list cleared.”

2. Delete your Bose® QuietComfort® headphones from the Bluetooth list on

your device.

All Bluetooth devices are cleared and the headphones are ready to pair a

new device.

20 - ENGLISH

HEADPHONE CONTROLS

The headphone controls are located on the side of the right earcup.

Volume up

Multi-function button

Volume down

Media playback and volume functions

Function What to do

Play/Pause

Press

Skip Forward

Press

twice quickly.

Fast Forward

Press

twice quickly and hold the second press.

Skip Backward

Press

three times quickly.

Rewind

Press

three times quickly and hold the third press.

Volume Up

Press

Volume Down

Press

ページが読み込まれています...

Bose SoundLink® wireless music system 取扱説明書

Bose SoundLink® wireless music system 取扱説明書

他の言語で

関連論文

その他のドキュメント