ページを読み込んでいます...
for iOS
User Manual
This user manual sets out the main features available
with the free version of djay Pro AI for iOS. Additional
features are available in the paid version of djay Pro AI.
The complete user manual for the app is available here:
https://help.algoriddim.com/hc/ (in English only).
The djay Pro AI interface may vary depending on the
version of the app being used.
TABLE OF CONTENTS
1. INTERFACE ................................................... 3
2. FEATURES .................................................... 8
Waveforms .................................................... 8
Beatgrid ......................................................... 9
BPM and tempo .......................................... 11
Adjusting the BPM ..................................... 11
Tempo sensitivity ....................................... 13
Track synchronization ............................... 14
Slip mode .................................................... 16
Effects .......................................................... 17
FX .............................................................. 17
Loops ......................................................... 21
HOT CUE points ........................................ 23
Equalizer .................................................... 25
Monitoring ................................................... 26
3. OTHER ......................................................... 28
Settings ....................................................... 28
FAQs and technical support ..................... 29
djay Pro AI subscription ............................ 29
4
① Track selection button. Tap to access your music
library and select a track. Displays the cover artwork for
the selected track.
② Track name (below) and artist name (above).
③ Time remaining/elapsed. Tap to toggle between
one display and the other.
④ Dashboard button. Tap to access the user menu
and app settings.
⑤ Track overview waveform.
⑥ Deck playhead.
5
⑦ SYNC button. Tap to sync the BPM values of the
two tracks.
⑧ Track BPM. Tap to open the BPM/Tempo window.
⑨ Mixer button. Tap to display the mixer section and
adjust the volume, the gain and the filter, as well as the
EQ (low, mid and high frequencies).
⑩ Scrolling waveform button. Tap to display the
scrolling waveforms for each deck.
⑪ Looper/Sampler button. Tap to display the Looper
or Sampler panel.
⑫ Tempo fader. Slide the fader to increase or decrease
the track’s BPM.
7
⑰ Play/Pause button.
⑱ Cue Set button. Tap to set a CUE point at the
current location of the deck playhead.
⑲ Cue Jump button. When the track is paused, tap to
move the deck playhead to the CUE point. When the
track is playing, tap to resume playback from the CUE
point. If no CUE point has been set, tap the button to
move the deck playhead to the start of the track.
⑳ Crossfader. Slide the crossfader to transition
between the two tracks. Tap the arrow to the right or to
the left of the crossfader to start an automatic transition
in the direction of the arrow.
8
2. Features
Waveforms
The djay Pro AI app displays the track overview
waveform of each track. You can also display a detailed
zoom of the waveform that automatically scrolls along
with the track, by tapping the scrolling waveform
button (10).
The different audio frequencies are represented by way
of a color code: red for low frequencies, yellow for low-
mid frequencies, green for high-mid frequencies, and
blue for high frequencies. A red deck playhead bar
shows you where you are in the track. The CUE point
(white triangle) and HOT CUE points (different colored
triangles) also appear on the two waveforms.
In addition, the scrolling waveform moves forward or
backward depending on how you manipulate the track
(scratching, moving to the CUE point or a HOT CUE
point…).
9
To increase or reduce the size of the scrolling waveform,
tap or . The Waveforms pop-up window
appears. Tap the – and + buttons to modify the size of
the waveform. To return to the default display, tap
Reset.
Beatgrid
A 4-beat grid is superimposed on the scrolling waveform.
The first beat of a bar (the down beat) is represented by
a yellow line. The following beats (intermediate beats)
are each represented by a gray line.
Occasionally, the beatgrid will not correspond to the
rhythm of the track and will require manual editing.
10
To correct the beatgrid:
1. Make sure that djay Pro AI has finished analyzing
the track.
2. Position the deck playhead at the spot where the
first beat of the first bar should be located.
3. Tap . The beatgrid editor appears.
4. In the Downbeat tab, tap Set Grid Start when the
deck playhead is at the correct location to move the
beatgrid.
To return to the default beatgrid, tap Restore.
Increase the size of the scrolling
waveform to see the
alignment of the beatgrid on the music more precisely.
11
BPM and tempo
Adjusting the BPM
Occasionally, the BPM detected by djay Pro AI will not
correspond to the track’s actual BPM value. The BPM
will then have to be adjusted manually.
To correct a track’s BPM:
1. Tap Track BPM (8). The BPM/Tempo pop-up
window is displayed.
2. Select the BPM tab.
o HALF button: divide the BPM value set by djay
Pro AI by two.
o DOUBLE button: multiply the BPM value set by
djay Pro AI by two.
13
Tempo sensitivity
You can modify the tempo range and the settings for the
tempo fader:
1. Tap Track BPM (8). The BPM/Tempo pop-up menu
appears.
2. Select the Tempo tab.
o Select Invert: invert the direction of the tempo
fader’s travel.
o Range ±: select a percentage range the tempo
fader controls.
15
To modify the sync settings:
1. Access the djay Pro AI settings: tap the Dashboard
button (4), then tap Settings and General.
2. In the Sync mode section, you can modify the sync
type and interval:
o Sync type: choose between tempo
synchronization (BPM only) or beat
synchronization (BPM and Beats).
o Beat Sync Interval: choose whether beat
synchronization is carried out on one or four
beats.
16
Slip mode
In Slip mode, the deck playhead continues to advance in
the background when you apply an effect or a loop, place a
CUE point, or when you use the Skip function or the jog
wheels. When you stop applying an effect, playback
resumes from the point where the track would be if it had
kept playing.
To enable Slip mode, tap or in the scrolling
waveform display. The Waveforms pop-up menu
appears. Toggle the Slip selector to the right.
Slip mode is automatically disabled whenever you
load a new track on a deck.
17
Effects
The djay Pro AI app offers four modes that help you
liven up your mix. To access the different modes, tap the
NM/FX/Loop/Cue/EQ button (15).
FX
To access the effects panel, tap .
• FX Pad tab
Seven effects are available: Echo, Reverb, Flanger,
Phaser, Bit Crusher, Gate and Alarm.
Select an effect, then use the pad to apply the effect and
modulate it.
18
• Instant tab
16 effects are available: Punch, Reverb, Chop,
Flanger 4, Bit Crusher, Twist, Phaser 4, Drift, Absorb,
Landing 1, Echo Out +1, Reverb Out, Gate 1/4, Alarm,
Hydrant and Rocket.
To apply an effect, tap and hold the name of the effect.
The effect stops when you stop holding the name of the
effect.
19
You can modify the effects assigned to each pad on
DJControl Mix:
1. Tap . Three dots appear next to the name of each
effect.
2. Tap next to the name of the effect that you want
to modify.
3. Select the new effect in the list of effects, then tap
Apply.
The four effects on the top row correspond to the four
pads on DJControl Mix.
/