SPARC M12

Fujitsu SPARC M12 ユーザーガイド

  • こんにちは!この富士通SPARC M12およびM10サーバーの安全およびコンプライアンスガイドに関するご質問にお答えします。このガイドには、安全基準、EMC、RoHS指令への適合性など、製品の安全と規制に関する重要な情報が記載されています。お気軽にご質問ください!
  • このサーバーはどのような安全規格に準拠していますか?
    このサーバーの電磁両立性(EMC)に関する情報はありますか?
    RoHS指令への適合状況はどうなっていますか?
Fujitsu SPARC M12 and
Fujitsu M10/SPARC M10
Safet
y
and Compliance Guide
安全に使用していただくために
Manual Code : C120-E676-23XA
December 2021
English
Français
Deutsch
Español
日本語
Русский
繁體中文
Copyright © 2007, 2021, Fujitsu Limited. All rights reserved.
Oracle and/or its affiliates provided technical input and review on portions of this material.
Oracle and/or its affiliates and Fujitsu Limited each own or control intellectual property rights relating to products and technology
described in this document, and such products, technology and this document are protected by copyright laws, patents, and other
intellectual property laws and international treaties.
This document and the product and technology to which it pertains are distributed under licenses restricting their use, copying,
distribution, and decompilation. No part of such product or technology, or of this document, may be reproduced in any form by any
means without prior written authorization of Oracle and/or its affiliates and Fujitsu Limited, and their applicable licensors, if any. The
furnishings of this document to you does not give you any rights or licenses, express or implied, with respect to the product or
technology to which it pertains, and this document does not contain or represent any commitment of any kind on the part of Oracle
or Fujitsu Limited or any affiliate of either of them.
This document and the product and technology described in this document may incorporate third-party intellectual property
copyrighted by and/or licensed from the suppliers to Oracle and/or its affiliates and Fujitsu Limited, including software and font
technology.
Per the terms of the GPL or LGPL, a copy of the source code governed by the GPL or LGPL, as applicable, is available upon request
by the End User. Please contact Oracle and/or its affiliates or Fujitsu Limited. This distribution may include materials developed by
third parties. Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California.
UNIX is a registered trademark of The Open Group.
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited.
SPARC Enterprise, SPARC64, SPARC64 logo and all SPARC trademarks are trademarks or registered trademarks of SPARC
International, Inc. in the United States and other countries and used under license.
Other names may be trademarks of their respective owners.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S.
Government, the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed
on the hardware, and/or documentation, delivered to U.S. Government end users are “commercial computer software” pursuant to
the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure,
modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the
hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other
rights are granted to the U.S. Government.
Disclaimer: The only warranties granted by Oracle and Fujitsu Limited, and/or any affiliate in connection with this document or any
product or technology described herein are those expressly set forth in the license agreement pursuant to which the product or
technology is provided.
EXCEPT AS EXPRESSLY SET FORTH IN SUCH AGREEMENT, ORACLE OR FUJITSU LIMITED, AND/OR THEIR AFFILIATES
MAKE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH PRODUCT OR
TECHNOLOGY OR THIS DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND ALL EXPRESS OR IMPLIED CONDITIONS,
REPRESENTATIONS AND WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE
EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Unless otherwise expressly set forth in such
agreement, to the extent allowed by applicable law, in no event shall Oracle or Fujitsu Limited, and/or any of their affiliates have any
liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or
for any indirect, special, incidental or consequential damages, even if advised of the possibility of such damages.
DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY
INVALID.
Fujitsu SPARC M12 is sold as SPARC M12 by Fujitsu in Japan.
Fujitsu SPARC M12 and SPARC M12 are identical products.
Fujitsu M10 is sold as SPARC M10 by Fujitsu in Japan.
Fujitsu M10 and SPARC M10 are identical products.
Contents
iii
Contents
Declaration of Conformity ······························································································· 1
Regulatory Compliance Statements ·················································································· 5
Safety Agency Compliance Statements ············································································· 9
Nordic Lithium Battery Cautions ···················································································· 50
Shielded Cables ··········································································································· 51
PSU Detail Information of ErP directive ( EU Regulation 617/2013 ) ····································· 52
Ecodesign requirements for servers and storage products of ErP directive
( EU Regulation 2019/424 ) ····························································································· 58
Declaration of Conformity
1
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
The undersigned authority declares that the product listed below:
Product Type: UNIX Server (SPARC M12-2/M12-2S)
Model Number: SP-2HNB, SP-2HBB
conforms with the following product specifications:
Safety
IEC 60950-1:2005, 2nd Edition + A1:2009 + A2:2013
IEC 62368-1:2014
EN 62368-1:2014 + A11:2017
ANSI/UL 62368-1-2014
CAN/CSA C22.2 No. 62368-1-14
CNS14336-1:2010
GOST IEC 60950-1-2014
IS 13252
(
Part 1
)
:2010 + A1:2013 + A2:2015
ElectroMagnetic Compatibility (EMC)
EN55032:2015 Class A
EN55024:2010
EN61000-3-2:2014
EN61000-3-3:2013
FCC Part-15 Subpart B Class A
ICES-003 Class A
VCCI V-3/2015.04 Class A
JIS C61000-3-2: 2011
CNS13438:2006 Class A
AS/NZS CISPR 32 Class A
STB EN 55022-2012
GOST 30805.22-2013
GOST CISPR 24-2013
GOST 30804.3.2-2013
GOST 30804.3.3-2013
KN32 Class A
KN35
Declaration of Conformity
2
This product complies with the requirements of the European Union directives listed below:
2014/35/EU Low Voltage Directive
2014/30/EU Electroma
g
netic Compatibilit
y
Directive
2012/19/EU Waste Electrical and Electronic Equipment (WEEE) Directive
2009/125/EC Ecodesign Directive
2011/65/EU as amended Restriction of Hazardous Substances
(
RoHS
)
Directive
This product complies with the requirements of the UK Statutory Instruments (and their amendments) listed below:
S.I. 2016/1091 The Electromagnetic Compatibility Regulations 2016
S.I. 2016/1101 The Electrical Equipment (Safety) Regulations 2016
S.I. 2010/2617 The Ecodesi
g
n for Ener
gy
-Related Products Re
g
ulations 2010
S.I. 2012/3032 The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012
Supplementary Information:
This equipment complies with all the requirements for the CE Mark and has had the CE mark affixed since year
2017.
This equipment complies with all the requirements for the UKCA Mark and has had the UKCA mark affixed since
year 2021.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with the EEE regulation for the Republic of Turkey. EEE Yönetmeliğine Uygundur.
Please refer to ending manual section for disclosed information on Ecodesign Directive (ErP directive, EU
Regulation 617/2013 and 2019/424) of this equipment.
Akinori Nishiie 12/01/2021
Head of Advanced Technology Quality Assurance Dept.
FUJITSU LIMITED
1-1, Kamikodanaka 4-Chome, Nakahara-Ku,
Kawasaki 211-8588, Japan
Declaration of Conformity
3
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
The undersigned authority declares that the product listed below:
Product Type: UNIX Server (SPARC M12-1/M10-1)
Model Number: SP-1S, SP-XB-BOX2, SP-PCI-BOX
conforms with the following product specifications:
Safety
IEC 60950-1:2005, 2nd Edition + A1:2009 + A2:2013
IEC 62368-1:2014
EN 62368-1:2014 + A11:2017
ANSI/UL 62368-1-2014
CAN/CSA C22.2 No. 62368-1-14
CNS14336-1:2010
GB4943.1-2011 (Applied to the SP-1S)
GOST IEC 60950-1-2014
IS 13252 (Part 1):2010 + A1:2013 + A2:2015
ElectroMagnetic Compatibility (EMC)
EN55032:2015 Class A
EN55024:2010
EN61000-3-2:2014
EN61000-3-3:2013
FCC Part-15 Subpart B Class A
CISPR-32:2015 Class A (Applied to the SP-1S)
CISPR 24:2010
ICES-003 Class A
VCCI V-3/2015.04 Class A
JIS C 61000-3-2: 2011
AS/NZS CISPR 32 Class A
KN22 Class A
KN24 Class A
KN32 Class A (Applied to the SP-1S)
KN35 Class A (Applied to the SP-1S)
CNS13438:2006
GB/T9254-2008 (Applied to the SP-1S)
GB17625.1-2012 (Applied to the SP-1S)
GOST 30805.22-2013
(
Applied to the SP-1S
)
GOST IEC 62479-2013
Declaration of Conformity
4
GOST CISPR32-2015
GOST CISPR24-2013
GOST 30804.3.2-2013
GOST 30804.3.3-2013
EN 300 386 V1.6.1
(
2012
)
This product complies with the requirements of the European Union directives listed below:
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility Directive
2012/19/EU Waste Electrical and Electronic Equipment
WEEE
Directive
2009/125/EC Ecodesign Directive
2011/65/EU as amended Restriction of Hazardous Substances (RoHS) Directive
Supplementary Information:
This equipment complies with all the requirements for the CE Mark and has had the CE mark affixed since year
2012
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with the EEE regulation for the Republic of Turkey. EEE Yönetmeliğine Uygundur.
Please refer to ending manual section for disclosed information on Ecodesign Directive (ErP directive, EU
Regulation 617/2013 and 2019/424) of this equipment.
Akinori Nishiie 10/12/2021
Head of Advanced Technology Quality Assurance Dept.
FUJITSU LIMITED
1-1, Kamikodanaka 4-Chome, Nakahara-Ku,
Kawasaki 211-8588, Japan
Regulatory Compliance Statements
5
Regulatory Compliance Statements
(各種規格との適合)
Your Fujitsu product is marked to indicate its compliance class:
富士通製品には、次の適合規制条件のクラスが明記されています。
Federal Communications Commission (FCC) USA
米連邦通信委員会FCCー米国
Interference-Causing Equipment Standards (ICES) Canada
カナダ妨害波規則ICESーカナダ
Voluntary Control Council for Interference by Information Technology Equipment (VCCI) Japan
情報処理装置等電波障害自主規制協議会VCCIー日本
Bureau of Standards Metrology and Inspection (BSMI) Taiwan
台湾経済部標準検験局BSMIー台湾
China Compulsory Certification (CCC) China
中国強制製品認証制度CCCー中国
Eurasian Conformity (EAC) of Customs Union (CU) common CU
ロシア圏関税同盟共通のユーラシア適合ーCU
Korea Communications Commission (KCC) Korea
韓国放送通信委員会KCCー韓国
Please read the appropriate section that corresponds to the marking on your Fujitsu product before attempting to
install the product.
本装置を設置する前に、装置に記載されているマークに従って、該当する節をよくお読みください。
Regulatory Compliance Statements
6
FCC Class A Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
FCC WARNING: Changes or modification not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC Class B Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
FCC WARNING: Changes or modification not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
ICES-003 Class A Notice - Avis NMB-003, Classe A
CAN ICES-3 (A) / NMB-3 (A)
ICES-003 Class B Notice - Avis NMB-003, Classe B
CAN ICES-3 (B) / NMB-3 (B)
Regulatory Compliance Statements
7
VCCI 基準について
クラス A VCCI 基準について
クラス A VCCI の表示があるワークステーションおよびオプション製品は、クラス A情報技術装置です。
これらの製品には、下記の項目が該当します。
この装置は、情報処理装置等電波障害自主規制協議会VCCI)の基準に基づくクラス A
情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあり
ます。この場合には使用者が適切な対策を講ずるよう要求されることがあります。
クラス B VCCI 基準について
クラス B VCCI の表示 があるワークステーションおよびオプション製品は、クラス B情報技術
装置です。これらの製品には、下記の項目が該当します。
この装置は、情報処理装置等電波障害自主規制協議会VCCI)の基準に基づくクラス B
情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この
装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすこ
とがあります。取扱説明書に従って正しい取り扱いをしてください。
高調波電流規格について
JIS C 61000-3-2 適合品
本装置は、高調波電流規格 JIS C 61000-3-2 に適合しています。
Regulatory Compliance Statements
8
BSMI Class A Notice
The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance
label.
CCC Class A Notice
The following statement is applicable to products shipped to China and marked with “Class A” on the product’s
compliance label.
EAC Certification Mark
Korean Class A Notice
Safety Agency Compliance Statements
9
Safety Agency Compliance Statements
English
Safety Agency Compliance Statements
Read this section before beginning any procedure. The
following text provides safety precautions to follow
when installing a Fujitsu product.
Safety Precautions
For your protection, observe the following safety
precautions when setting up your equipment:
Follow all cautions and instructions marked on the
equipment.
Ensure that the voltage and frequency of your power
source match the voltage and frequency inscribed on
the equipment’s electrical rating label.
Never push objects of any kind through openings in
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or
damage to your equipment.
Symbols
The following symbols may appear in this book:
Caution – There is a risk of personal injury
and equipment damage. Follow the
instructions.
Caution – Hot surface. Avoid contact.
Surfaces are hot and may cause personal
injury if touched.
Caution – Hazardous voltages are present.
To reduce the risk of electric shock and
danger to personal health, follow the
instructions.
Depending on the type of power switch your device
has, one of the following symbols may be used:
On – Applies AC power to the system.
Off – Removes AC power from the system.
Standby – The On/Standby switch is in the
standby position.
Modifications to Equipment
Do not make mechanical or electrical modifications to
the equipment. Fujitsu is not responsible for regulatory
compliance of a modified Fujitsu product.
Placement of a Fujitsu Product
Caution – Do not block or cover the
openings of your Fujitsu product. Never
place a Fujitsu product near a radiator or
heat register. Failure to follow these
guidelines can cause overheating and affect
the reliability of your Fujitsu product.
Safety Agency Compliance Statements
10
Noise Level
Product SPARC M12-1CPU: SPARC64 XII
The following table shows the noise levels measured at
an ambient temperature of 23°C, in accordance with the
requirements defined in ISO 7779.
SPARC M12-1:
Operating Idling
LWAd1 7.4 B 7.4 B
LpAm2 58 dB 58 dB
1
LWAd indicates the declared A-weighted sound power
level.
2
LpAm indicates the declared A-weighted emission
sound pressure level at the bystander position.
Product SPARC M12-2/M12-2SCPU: SPARC64 XII
The following table shows the noise levels measured at
an ambient temperature of 23°C, in accordance with the
requirements defined in ISO 7779.
SPARC M12-2for 1-CPU configuration:
Operating Idling
LWAd1 7.8 B 7.7 B
LpAm2 62 dB 61 dB
SPARC M12-2for 2-CPU configuration:
Operating Idling
LWAd1 8.2 B 7.7 B
LpAm2 64 dB 61 dB
SPARC M12-2Sfor 1-CPU configuration:
Operating Idling
LWAd1 8.2 B 7.7 B
LpAm2 64 dB 61 dB
SPARC M12-2Sfor 2-CPU configuration:
Operating Idling
LWAd1 8.5 B 7.7 B
LpAm2 68 dB 61 dB
1
LWAd indicates the declared A-weighted sound power
level.
2
LpAm indicates the declared A-weighted emission
sound pressure level at the bystander position.
Safety Agency Compliance Statements
11
Product SPARC M10-1/M10-4/M10-4S
CPU: SPARC64 X
The following table shows the noise levels measured at
an ambient temperature of 23°C, in accordance with the
requirements defined in ISO 7779.
SPARC M10-1:
Operating Idling
LWAd1 6.8 B 6.8 B
LpAm2 50 dB 50 dB
SPARC M10-4/M10-4Sfor 2-CPU configuration:
Operating Idling
LWAd1 7.5 B 6.9 B
LpAm2 58 dB 56 dB
SPARC M10-4/M10-4Sfor 4-CPU configuration:
Operating Idling
LWAd1 8.2 B 6.9 B
LpAm2 64 dB 56 dB
1
LWAd indicates the declared A-weighted sound power
level.
2
LpAm indicates the declared A-weighted emission
sound pressure level at the bystander position.
Product SPARC M10-1/M10-4/M10-4S
CPU: SPARC64 X+
The following table shows the noise levels measured at
an ambient temperature of 23°C, in accordance with the
requirements defined in ISO 7779.
SPARC M10-1:
Operating Idling
LWAd1 7.4 B 7.4 B
LpAm2 58 dB 58 dB
SPARC M10-4/M10-4Sfor 2-CPU configuration:
Operating Idling
LWAd1 8.5 B 7.0 B
LpAm2 67 dB 57 dB
SPARC M10-4/M10-4Sfor 4-CPU configuration:
Operating Idling
LWAd1 9.0 B 7.0 B
LpAm2 74 dB 57 dB
1
LWAd indicates the declared A-weighted sound power
level.
2
LpAm indicates the declared A-weighted emission
sound pressure level at the bystander position.
Safety Agency Compliance Statements
12
SELV Compliance
Safety status of I/O connections comply to SELV
requirements.
Power Cord Connection
Caution – Fujitsu products are designed to
work with power systems having a grounded
neutral (grounded return for DC-powered
products). To reduce the risk of electric
shock, do not plug Fujitsu products into any
other type of power system. Contact your
facilities manager or a qualified electrician if
you are not sure what type of power is
supplied to your building.
Caution – Not all power cords have the
same current ratings. Do not use the power
cord provided with your equipment for any
other products or use. Household extension
cords do not have overload protection and
are not meant for use with computer
systems. Do not use household extension
cords with your Fujitsu product.
The following caution applies only to devices with a
Standby power switch:
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the
power cord into a grounded power outlet that
is nearby the system and is readily
accessible. Do not connect the power cord
when the power supply has been removed
from the system chassis.
The following caution applies only to devices with
multiple power cords:
Caution: Shock hazard – For products with
multiple power cords, all power cords must
be disconnected to completely remove
power from the system.
Battery Warning
Caution – There is danger of explosion if
batteries are mishandled or incorrectly
replaced. On systems with replaceable
batteries, replace only with the same
manufacturer and type or equivalent type
recommended by the manufacturer per the
instructions provided in the product service
manual. Do not disassemble batteries or
attempt to recharge them outside the
system. Do not dispose of batteries in fire.
Dispose of batteries properly in accordance
with the manufacturer’s instructions and
local regulations. Note that on Fujitsu
motherboard units, there is a lithium battery
molded into the real-time clock. These
batteries are not customer replaceable parts.
System Unit Cover
You must remove the cover of your Fujitsu computer
system unit to add cards or memory. Be sure to replace
the cover before powering on your computer system.
Caution – Do not operate Fujitsu products
without the cover in place. Failure to take
this precaution may result in personal injury
and system damage.
Safety Agency Compliance Statements
13
Rack System Instructions
The following or similar rack-mount instructions are
included with the installation instructions:
Elevated Operating Ambient – If installed in a
closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration
should be given to installing the equipment in an
environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
Reduced Air Flow – Installation of the equipment in
a rack should be such that the amount of air flow
required for safe operation of the equipment is not
compromised.
Mechanical Loading – Mounting of the equipment in
the rack should be such that a hazardous condition is
not achieved due to uneven mechanical loading.
Circuit Overloading – Consideration should be
given to the connection of the equipment to the
supply circuit and the effect that overloading of the
circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing
this concern.
Reliable Earthing – Reliable earthing of rack-
mounted equipment should be maintained. Particular
attention should be given to supply connections other
than direct connections to the branch circuit (for
example, use of power strips).
Caution – Slide/rail mounted equipment
must not be used as a shelf or workspace.
Rack System Warning
The following warnings apply to Racks and Rack
Mounted systems.
Caution – For safety, equipment should
always be loaded from the bottom up. That
is, install the equipment that will be mounted
in the lowest part of the rack first, then the
next higher systems, etc.
Caution – To prevent the rack from tipping
during equipment installation, the anti-tilt bar
on the rack must be deployed.
Caution – To prevent extreme operating
temperature within the rack insure that the
maximum temperature does not exceed the
product’s ambient rated temperatures.
Caution – To prevent extreme operating
temperatures due to reduced airflow
consideration should be made to the amount
of air flow that is required for a safe
operation of the equipment.
Caution – Take adequate precautions when
moving a rack or library that contains rack-
installed equipment. The weight of some
rack equipment may have altered the rack or
library center of gravity and could cause an
overbalance/tip condition during a move.
Safety Agency Compliance Statements
14
Laser Compliance Notice
Fujitsu products that use laser technology comply with
Class 1 or Class 1M laser requirements.
CD and DVD Devices
The following caution applies to CD, DVD, and other
optical devices.
Caution – Use of controls, adjustments, or
the performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Safety Agency Compliance Statements
15
Français
Conformité aux normes de sécurité
Veuillez lire attentivement cette section avant de
commencer. Ce texte traite des mesures de sécurité
qu’il convient de prendre pour l’installation d’un produit
Fujitsu.
Mesures de sécurité
Pour votre sécurité, nous vous recommandons de
suivre scrupuleusement les mesures de sécurité ci-
dessous lorsque vous installez votre matériel:
Suivez tous les avertissements et toutes les
instructions inscrites sur le matériel.
Assurez-vous que la tension et la fréquence de votre
source d'alimentation correspondent à la tension et à
la fréquence indiquées sur l'étiquette de la tension
électrique nominale du matériel.
N'introduisez jamais d'objets quels qu'ils soient dans
les ouvertures de l'équipement. Vous pourriez vous
trouver en présence de hautes tensions
dangereuses. Tout objet étranger conducteur risque
de produire un court-circuit pouvant présenter un
risque d'incendie ou de décharge électrique, ou
susceptible d'endommager le matériel.
Symboles
Vous trouverez ci-dessous la signification des différents
symboles utilisés:
Attention – Vous risquez d'endommager le
matériel ou de vous blesser. Veuillez suivre
les instructions.
Attention – Surfaces brûlantes. Evitez tout
contact. Les surfaces sont brûlantes. Vous
risquez de vous blesser si vous les touchez.
Attention – Tensions dangereuses. Pour
réduire les risques de décharge électrique et
de danger physique, observez les consignes
indiquées.
Selon le type d'interrupteur marche/arrêt dont votre
appareil est équipé, l'un des symboles suivants sera
utilisé:
Marche – Met le système sous tension
alternative.
Arret – Met le système hors tension
alternative.
Veilleuse – L'interrupteur Marche/Veille est
sur la position de veille.
Modification du matériel
N'apportez aucune modification mécanique ou
électrique au matériel. Fujitsu décline toute
responsabilité quant à la non-conformité éventuelle
d'un produit Fujitsu modifié.
Positionnement d’un produit Fujitsu
Attention – Evitez d'obstruer ou de
recouvrir les orifices de votre produit Fujitsu.
N'installez jamais un produit Fujitsu près
d'un radiateur ou d'une source de chaleur. Si
vous ne respectez pas ces consignes, votre
produit Fujitsu risque de surchauffer et son
fonctionnement en sera altéré.
Safety Agency Compliance Statements
16
Niveau de pression acoustique
Produit SPARC M12-1CPU: SPARC64 XII
Le tableau suivant montre le niveau d’émission sonore
à une température ambiante de 23°C, conformément
aux normes définies dans ISO 7779.
SPARC M12-1:
En service Inactif
LWAd1 7.4 B 7.4 B
LpAm2 58 dB 58 dB
1
LWAd indique le niveau de puissance acoustique
pondéré A déclaré.
2
LpAm indique le niveau de pression acoustique en
émission, pondéré A, déclaré à la position du
spectateur.
Produit SPARC M12-2/M12-2SCPU: SPARC64 XII
Le tableau suivant montre le niveau d’émission sonore
à une température ambiante de 23°C, conformément
aux normes définies dans ISO 7779.
SPARC M12-2pour configuration UC 1:
En service Inactif
LWAd1 7.8 B 7.7 B
LpAm2 62 dB 61 dB
SPARC M12-2pour configuration UC 2:
En service Inactif
LWAd1 8.2 B 7.7 B
LpAm2 64 dB 61 dB
SPARC M12-2Spour configuration UC 1:
En service Inactif
LWAd1 8.2 B 7.7 B
LpAm2 64 dB 61 dB
SPARC M12-2Spour configuration UC 2:
En service Inactif
LWAd1 8.5 B 7.7 B
LpAm2 68 dB 61 dB
1
LWAd indique le niveau de puissance acoustique
pondéré A déclaré.
2
LpAm indique le niveau de pression acoustique en
émission, pondéré A, déclaré à la position du
spectateur.
Safety Agency Compliance Statements
17
Produit SPARC M10-1/M10-4/M10-4S
CPU: SPARC64 X
Le tableau suivant montre le niveau d’émission sonore
à une température ambiante de 23°C, conformément
aux normes définies dans ISO 7779.
SPARC M10-1:
En service Inactif
LWAd1 6.8 B 6.8 B
LpAm2 50 dB 50 dB
SPARC M10-4/M10-4Spour configuration UC 2:
En service Inactif
LWAd1 7.5 B 6.9 B
LpAm2 58 dB 56 dB
SPARC M10-4/M10-4Spour configuration UC 4:
En service Inactif
LWAd1 8.2 B 6.9 B
LpAm2 64 dB 56 dB
1
LWAd indique le niveau de puissance acoustique
pondéré A déclaré.
2
LpAm indique le niveau de pression acoustique en
émission, pondéré A, déclaré à la position du
spectateur.
Produit SPARC M10-1/M10-4/M10-4S
CPU: SPARC64 X+
Le tableau suivant montre le niveau d’émission sonore
à une température ambiante de 23°C, conformément
aux normes définies dans ISO 7779.
SPARC M10-1:
En service Inactif
LWAd1 7.4 B 7.4 B
LpAm2 58 dB 58 dB
SPARC M10-4/M10-4Spour configuration UC 2:
En service Inactif
LWAd1 8.5 B 7.0 B
LpAm2 67 dB 57 dB
SPARC M10-4/M10-4Spour configuration UC 4:
En service Inactif
LWAd1 9.0 B 7.0 B
LpAm2 74 dB 57 dB
1
LWAd indique le niveau de puissance acoustique
pondéré A déclaré.
2
LpAm indique le niveau de pression acoustique en
émission, pondéré A, déclaré à la position du
spectateur.
/