Brook B08H1SYGWV ユーザーガイド

ブランド: Brook

モデル: B08H1SYGWV

タイプ: ユーザーガイド

Brook B08H1SYGWV は、最新の変換アダプタで、PS5ゲーム機でアーケードコントローラーを使用できるようにする設計です。このツールを使うと、PS4、スイッチ、PCなどの他のゲームシステムでアーケードコントローラーを使用することもできます。また、このアダプタは、連射機能やボタンマッピングなど、ゲームプレイを向上させるために使用できる様々な機能を備えています。

Brook B08H1SYGWVは、アーケードコントローラーを所有している熱心なゲーマーに最適です。このアダプタを使うと、お気に入りのコントローラーを様々なゲームで利用でき、ゲームプレイをさらに楽しむことができます。連射機能やボタンマッピングなどの追加機能により、Brook B08H1SYGWVは、ゲーム体験を向上させたいゲーマーにとって最適なアイテムです。

User Guide

CONVERTER

FGC

Content

English

Traditional Chinese

Japanese

Korean

CONVERTER

LED Button

USB port can be used to connect

to PS5 / PC

Simply connect to wired Fighting Stick.

Each Wingman FGC can only connect to a single Fighting Stick

device. Wingman FGC supports most of the accessories that

are compatible with original factory specications. To expand

the number of supported accessories, rmware will be

updated irregularly.

FGC

(X-Input)

PS5

Wired

only

Wired

Fighting Stick

Wingman FGC

PS4

1. Connects to Console

Insert Wingman FGC into the PS5 console USB port. Slow

blinking of the Blue LED indicates that the connection to the

console is successful.

2. Connects to Wired Controller

Connect the Wired Fighting Stick to Wingman FGC through the

USB port.

Lighting

Blue LED

Permanently on

Blue LED

Slow blinking

(Once every two seconds)

Status

The converter and the Wired

Fighting Stick are currently

connected.

Wired Fighting Stick is not

connected.

LED Display

Connecting to the Device

Red LED

Blinking

Red LED

Permanently on

Turbo-Remap button is being

pressed

Entering Turbo-Remap

Settings

Corresponding Buttons

X1/X1E2 X360 PS4/PS5 PS3 Switch PC

D-Pad (U/D/L/R)

Lx / Ly

Rx / Ry

OPTIONS

/Create

START

SELECT

LSB

RSB

START

BACK

START

LSB

RSB

View MENU

/MENU

LSB

RSB

START

BACK

VIEW/

SHARE BACK TP Key Capture

Xe Key Xe Key PS Key PS Key Home Xe Key

The following instructions are based on the PS4 controller.

Buttons that can be set as Turbo function buttons include: ╳, ○,

□, △, L1, R1, L2, R2, L3, R3 (hereinafter referred to as FK)

Step 1. Enter setting mode:

Press SHARE PS Key, the RED LED of the Wingman FGC will

be permanently on.

Step 2. Choosing a FK button: (e.g. Setting ╳ as turbo function)

Hold SHARE, then press ╳

Step 3. Completing Setting Mode:

Release all buttons, then press OPTIONS to save settings.

Step 4. Exit setting mode:

Press PS Key, the BLUE LED of the Wingman FGC will be

permanently on.

Turbo Function Settings

Step 1. Enter setting mode:

Press SHARE PS Key, the RED LED of the Wingman FGC will

be permanently on.

Step 2. Erasing all Turbo function buttons

Press SHARE OPTIONS

Step 3. Exit setting mode:

Press PS Key, the BLUE LED of the Wingman FGC will be

permanently on.

Cancelling Turbo Function

Turbo Function Settings

The following instructions are based on the PS4 controller.

Step 1. Enter the setup mode

Press SHARE PS Key, the RED LED of the Wingman FGC will

be permanently on.

Step 2. Turbo Frequency Setting

The Up button increases frequency while the Down button

decreases it.

To increase frequency: press both SHARE and the Up buttons,

and the indicator will ash faster.

To decrease frequency: press both SHARE and Down buttons,

then the indicator will ash slower.

Step 3. Save

Press OPTIONS to save your settings.

Step 4. Exit

Press the PS Key button to leave Turbo setup mode. The RED

LED indicator will then turned o.

Turbo Frequency Setting

The following instructions are based on the PS4 controller.

Buttons that can be Remap include: ╳, ○, □, △, L1, R1, L2, R2,

L3, R3 (hereinafter referred to as FK)

Step 1. Enter setting mode:

Press OPTIONS PS Key, the RED LED of the Wingman FGC

will be permanently on.

Step 2. Choosing a FK button: (e.g. Setting □ as ╳+○)

Press □

Step 3. Choosing button to be set:

Hold SHARE, then press ╳+○.

Step 4. Completing setting mode:

Release all buttons, then press OPTIONS to save settings.

Step 5. Exit setting mode:

Press PS Key, the BLUE LED of the Wingman FGC will be

permanently on.

Step 1. Enter setting mode:

Press OPTIONS PS Key, the RED LED of the Wingman FGC

will be permanently on.

Step 2. Erasing all settings for Button Remap Settings.

Press SHARE OPTIONS.

Step 3. Exit setting mode:

Press PS Key, the BLUE LED of the Wingman FGC will be

permanently on.

Button Remap Settings

Cancelling Button Remap Settings

Button Remap Settings

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Ambient Operating Temperature ......................0℃ to +50℃

202304V1

ISED Statement:

This device contains licence-exempt transmitter(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt

RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference,

(2) this device must accept any interference, including interference that

may cause undesired operation of the device.

L’émetteur exempt de licence contenu dans le présent appareil est

conforme aux CNR d’Innovation, Sciences et Développement économique

Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même

si le brouillage est susceptible d’en compromettre le fonctionnement.

Brook Gaming

For the latest user guide and more information, visit our website:

www.brookaccessory.com

FCC ID: 2ADKM005A

IC: 29174-ZPP005A

P/N: Wingman FGC

M/N: ZPP005A

CONVERTER

每個 Wingman FGC 一次僅能對應一支有線格鬥台裝置。

Wingman FGC 支援大多數符合原廠規格之相容配件，並

不定時藉由韌體更新擴充支援清單。

PS5 / PC

FGC

(X-Input)

PS5

Wired

only

Wired

Fighting Stick

Wingman FGC

PS4

LED

將 Wingman FGC 連接到 PS5 主機的 USB 連接埠，當藍色 LED

慢速閃爍即代表與主機連線成功。

將有線大搖台以 USB 線連接至 Wingman FGC 即可使用。

燈號

藍色 LED

恆亮

藍色 LED

慢速閃爍

（兩秒閃一次）

狀態

轉接器與有線格鬥台

連線工作中

有線格鬥台未接續

紅色 LED

閃爍

紅色 LED

恆亮

Turbo-Remap

功能鍵被按下

進入Turbo-Remap

設定模式

X1/X1E2 X360 PS4/PS5 PS3 Switch PC

D-Pad (U/D/L/R)

Lx / Ly

Rx / Ry

OPTIONS

/Create

START

SELECT

LSB

RSB

START

BACK

START

LSB

RSB

View MENU

/MENU

LSB

RSB

START

BACK

VIEW/

SHARE BACK TP Key Capture

Xe Key Xe Key PS Key PS Key Home Xe Key

以下說明使用 PS4 控制器為範例，。

允許設定連射功能的按鍵包括：╳, ○, □, △, L1, R1, L2, R2, L3,

R3（以下稱為FK）。

Step 1. 進入設置模式：

按SHARE PS Key鍵，Wingman FGC 將顯示紅色 LED

恆亮。

Step 2. 選擇 FK 按鍵:(例如，╳ 設置 Turbo 功能）

按住 SHARE，然後按 ╳。

Step 3. 完成設置模式：

釋放所有按鍵，然後按 OPTIONS 儲存設定。

Step 4. 退出設置模式：

按 PS Key 鍵，Wingman FGC 將顯示藍色 LED 恆亮。

Step 1. 進入設置模式：

按SHARE PS Key 鍵，Wingman FGC 將顯示紅色 LED

恆亮。

Step 2. 清除所有 Turbo 功能按鍵：

按SHARE OPTIONS 鍵。

Step 3. 退出設置模式：

按PS Key 鍵，Wingman FGC 將顯示藍色 LED 恆亮。

以下說明使用 PS4 控制器為範例。

Step 1. 進入設定模式

按下 SHARE＋PS Key 鍵，進入到 Turbo 設定模式，燈號顯

示為紅色 LED，表示已進入到 Turbo 設定模式。

Step 2. 連射頻率設定

左邊的方向鍵上代表將Turbo的頻率調高、方向鍵下則代表

將Turbo的頻率調低。

如果要調高，則同時按下 SHARE 和方向鍵上，此時的燈號的

閃爍頻率會跟著加快；

如果要調低，則同時按下 SHARE 和方向鍵下，此時的燈號頻

率會跟著降低。

Step 3. 儲存設定

按下 OPTIONS 儲存設定。

Step 4. 退出設定

按下 PS Key 鍵離開 Turbo 設定模式，紅色LED燈號將會熄

滅。

以下說明使用 PS4 控制器為範例。

允許重新分配設置的按鍵包括：╳, ○, □, △, L1, R1, L2, R2, L3,

R3（以下稱為FK）。

Step 1. 進入設置模式：

按OPTIONS PS Key 鍵，Wingman FGC 將顯示紅色 LED

恆亮。

Step 2. 選擇 FK 按鍵:(例如，□ 作 ╳+○）

按 □ 鍵。

Step 3. 選擇重新分配按鍵：

按住 SHARE，然後按 ╳+○ 鍵。

Step 4. 完成設置模式：

釋放所有按鍵，然後按 OPTIONS 儲存設定。

Step 5. 退出設置模式：

按 PS Key 鍵，Wingman FGC 將顯示藍色 LED 恆亮。

Step 1. 進入設置模式：

按 OPTIONS PS Key 鍵，Wingman FGC 將顯示紅色 LED 恆亮。

Step 2. 清除所有重新分配按鍵的設定：

按 SHARE OPTIONS 鍵。

Step 3. 退出設置模式：

按 PS Key 鍵，Wingman FGC 將顯示藍色 LED 恆亮。

202304V1

Brook Gaming

低功率電波輻射性電機管理辦法

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均

不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有

干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須

忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

最新版說明書 / 更多詳細操作請上 Brook 官網查詢

www.brookaccessory.com

P/N: Wingman FGC

M/N: ZPP005A

CCAN20LP0801T0

CONVERTER

PS5 / PC

FGC

ページが読み込まれています...

Brook B08H1SYGWV ユーザーガイド

ブランド: Brook

モデル: B08H1SYGWV

タイプ: ユーザーガイド

PDFをダウンロードします

報告

他の言語で

English: Brook B08H1SYGWV User guide