Zebra DS7708 取扱説明書

DS7708 2D

竖直插槽扫描器

产品参考指南

DS7708 2D 竖直插槽扫描器

产品参考指南

MN001062A09ZHCN

版本 A

2021 年 4 月

ii DS7708 2D 竖直插槽扫描器产品参考指南

未经 Zebra 书面许可，不得以任何形式或通过任何电子/机械方式使用或转载本文的任何部分。其中的电子/机

械方式包括但不限于影印、录制或信息存储和检索系统。本手册内容如有更改，恕不另行通知。

软件严格“依照原样”提供。所有软件（包括固件）均需要有许可证才能使用。Zebra 为用户授予下面所提供的

每种软件或固件程序（授权程序）的不可转让且非排它的使用许可。除非另有声明，否则未经 Zebra 事先书面

同意，用户不得转让、二次许可或以其他形式转让这类许可证。同时未经版权法允许，用户无权完全或部分复

制许可程序。用户在未得到 Zebra 书面许可的前提下不得修改许可程序的任何表格或部分，也不应将其与其他

程序资料合并、创建派生程序或在网络中使用许可程序。用户同意严格遵守 Zebra 对许可程序所做的版权声

明，并在其创建的所有授权副本中完全或部分包含同样内容。用户同意不对提供的任何许可程序或其中任何部

分执行反编译、反汇编、解码或逆向工程。

Zebra 保留为完善可靠性、功能或设计而对任何软件或产品做出更改的权力。由于此处所述应用程序或任何产

品、电路或应用程序的使用而引发的或与之相关的产品问题，Zebra 概不承担任何责任。

不得假借 Zebra Technologies Corporation 知识产权之名明示或通过暗示、默许或其他方式授予许可证。Zebra

仅为其产品中所包含的设备、电路和子系统提供暗示许可。

保修

要获得完整的 Zebra 硬件产品保修声明，请访问：

zebra.com/warranty

。

iii

修订历史记录

下面列出了指南初稿的数次更改：

更改日期描述

-01 版本 A

2015 年 3 月

初版

-02 修订版 A 2015 年 4 月更新了第 11-2 页有关将 Zebra 扫描器用作辅助扫描器的注释。

-03 版本 A

2015 年 7 月

销更新

-04 修订版 A 2015 年 12 月更新了以下内容：

- 将“峰鸣器声调”默认值从“中”更新为“高”。

-更新了

第 13-42 页的表 13-2

以反映新图像套件中的正确行为。

-05 修订版 A 2018 年 7 月 - 为“PDF 优先”参数添加了注释以更新长度范围

-

增加了“产品 ID (PID) 类型”参数

- 重命名了“USB 设备类型 OPOS”，并且增加了注释

- 增加了“直接 I/O 蜂鸣声”参数

- 更新了“IBM 主机”的“蜂鸣声指令”和“条码配置指令

”

-

增加了“IBM-485 规格版本”参数

- 更新了“SSI 波特率”选项值

- 增加了“Codabar 安全级别”参数

- 增加了“MSI 减少空白区”参数

- 增加了有关“颠倒 1D”参数的注释

- 增加了 Mailmark 参数

- 增加了“GS1 Databar 安全级别”参数

- 将“GS1 DataBar Limited 安全级别”参数重命名为“DataBar Limited

空白区检查”，并且更新了说明

- 增加了“复合颠倒”参数

- 增加了“Grid Matrix”、“Grid Matrix 颠倒”和“Grid Matrix 镜像”参数

- 删除了“QR 颠倒”参数

- 删除了有关慢速解码的 OCR 说明

增加了“OCR-B 护照”选项

- 增加了“OCR 冗余”参数

- 更改了“OCR 模板”默认值

- 更新了 123Scan 章节

- 更新了“代码标识符”和“修饰字符”表

-06 版本 A 2019 年 6 月 - Code 39 成为第 12 章的一个节标题。

-

-07 版本 A 2020 年 2 月 -增加了 W

eblink QR 码。

- 更新了参数 #144 “解码之间的超时，不同码制”的默认值为1 秒

-08 版本 A 2020 年 8 月 - 更新了商品电子防盗系统 (EAS)

-

更新了移动电话参数

- 更新了扫描器 SDK、其他软件工具和视频

- 添加了 DotCode、DotCode 颠倒、DotCode 镜像和 DotCode 优先

参数。

-09 版本 A 2021 年 4 月更新了移动电话参数。

iv DS7708 2D 竖直插槽扫描器产品参考指南

保修............................................................................................................................................ ii

修订历史记录 ............................................................................................................................. iii

关于本指南

简介............................................................................................................................................ v

扫描器配置................................................................................................................................. v

附件............................................................................................................................................ vi

章节介绍..................................................................................................................................... viii

符号约定..................................................................................................................................... ix

相关出版物................................................................................................................................. x

服务信息..................................................................................................................................... x

第 1 章 : 入门指南

简介 .......................................................................................................................................... 1-1

拆开扫描器包装 ........................................................................................................................ 1-1

保护敷层 ............................................................................................................................. 1-1

功能 .......................................................................................................................................... 1-2

设置扫描器 ............................................................................................................................... 1-4

电源选项 ............................................................................................................................. 1-4

端口 .................................................................................................................................... 1-4

连接主机和 / 或辅助扫描器电缆 ......................................................................................... 1-4

拆卸和安装后盖 .................................................................................................................. 1-4

取下后盖 ....................................................................................................................... 1-4

安装电缆 ............................................................................................................................. 1-5

取下安装有电缆的后盖 ................................................................................................. 1-5

安装后盖 ....................................................................................................................... 1-5

配置扫描器 ......................................................................................................................... 1-6

同步设置 ............................................................................................................................. 1-6

主机请求更改设置 ........................................................................................................ 1-6

DS7708 上扫描的条码菜单符号 ................................................................................... 1-6

在手持扫描器上扫描的条码菜单符号 ............................................................................ 1-6

vi DS7708 2D 竖直槽式扫描器产品参考指南

安装扫描器（需要可选硬件） ................................................................................................... 1-7

将扫描器安装到桌面上 ........................................................................................................ 1-7

使用双面胶将扫描器安装到桌面 .................................................................................... 1-7

使用螺钉将扫描器安装到桌面上 .................................................................................... 1-7

将扫描器安装到墙面 ............................................................................................................ 1-8

从安装支架卸下扫描器 ........................................................................................................ 1-9

操作扫描器 ................................................................................................................................ 1-10

指示灯 ................................................................................................................................. 1-10

调节扬声器音量 ................................................................................................................... 1-10

调节扬声器音调 ................................................................................................................... 1-10

墙面底座模板 ............................................................................................................................ 1-11

桌面底座模板 ............................................................................................................................ 1-12

第 2 章 : 123SCAN

简介 ........................................................................................................................................... 2-1

与 123Scan 通信 ....................................................................................................................... 2-2

123Scan 要求 ........................................................................................................................... 2-2

123Scan 信息 ........................................................................................................................... 2-3

扫描器 SDK、其他软件工具和视频 ........................................................................................... 2-3

第 3 章 : 数据采集

概述 ........................................................................................................................................... 3-1

扫描产品条码 ............................................................................................................................ 3-2

有效扫描区域 ...................................................................................................................... 3-2

解码范围 ................................................................................................................................... 3-3

用户指示器 ................................................................................................................................ 3-4

蜂鸣器音量 / 蜂鸣器音调 ..................................................................................................... 3-4

LED 和蜂鸣器指示器 ........................................................................................................... 3-4

商品电子防盗系统 (EAS) .......................................................................................................... 3-7

安装 ..................................................................................................................................... 3-7

Checkpoint EAS 型号兼容性 ......................................................................................... 3-7

考虑事项 ........................................................................................................................ 3-7

Checkpoint 联系信息 ..................................................................................................... 3-7

第 4 章 : 维护、技术规格、安装模板

简介 ........................................................................................................................................... 4-1

维护 ........................................................................................................................................... 4-1

故障排除 ................................................................................................................................... 4-2

技术规格 ................................................................................................................................... 4-3

扫描器信号说明 ......................................................................................................................... 4-6

第 5 章 : 用户首选项和其他选项

简介 ........................................................................................................................................... 5-1

扫描序列示例 ............................................................................................................................ 5-2

扫描时的错误 ............................................................................................................................ 5-2

用户首选项 / 其他选项参数默认值 ............................................................................................. 5-2

用户首选项 ................................................................................................................................ 5-4

目录 vii

设置默认参数 ..................................................................................................................... 5-4

参数条码扫描 ..................................................................................................................... 5-6

良好解码后发出蜂鸣声 ....................................................................................................... 5-7

蜂鸣器音调 ......................................................................................................................... 5-8

蜂鸣器音量 ......................................................................................................................... 5-11

蜂鸣器持续时间 .................................................................................................................. 5-13

音量 / 音调按钮控制 ........................................................................................................... 5-15

抑制开机蜂鸣声 .................................................................................................................. 5-17

解码之间的超时，相同码制 ................................................................................................ 5-18

解码之间的超时，不同码制 ................................................................................................ 5-18

模糊 1D 处理 ...................................................................................................................... 5-19

解码镜像（仅限 Data Matrix） ........................................................................................... 5-20

PDF 优先 ............................................................................................................................ 5-22

PDF 优先超时 .................................................................................................................... 5-23

移动电话 / 显示屏模式 ........................................................................................................ 5-24

视域 .................................................................................................................................... 5-25

产品 ID (PID) 类型 .............................................................................................................. 5-27

其它扫描器参数 ........................................................................................................................ 5-29

传输代码 ID 字符 ................................................................................................................ 5-29

前缀 / 后缀值 ...................................................................................................................... 5-31

扫描数据传输格式 .............................................................................................................. 5-34

FN1 替代值 ........................................................................................................................ 5-38

主动检测信号间隔 .............................................................................................................. 5-39

第 6 章 : 成像首选项

简介 .......................................................................................................................................... 6-1

扫描序列示例 ........................................................................................................................... 6-2

扫描时的错误 ........................................................................................................................... 6-2

成像首选项参数默认值 ............................................................................................................. 6-2

成像首选项 ............................................................................................................................... 6-4

操作模式 ............................................................................................................................. 6-4

解码模式 ....................................................................................................................... 6-4

快照模式 ....................................................................................................................... 6-4

快照模式超时 ..................................................................................................................... 6-5

图像尺寸（像素数） ........................................................................................................... 6-6

图像亮度（目标白色） ....................................................................................................... 6-8

JPEG 图像选项 .................................................................................................................. 6-9

JPEG 目标文件大小 ........................................................................................................... 6-10

JPEG 质量和大小值 ........................................................................................................... 6-11

图像增强 ..........................................................

................................................................... 6-12

图像文件格式选择 .............................................................................................................. 6-14

图像旋转 ............................................................................................................................. 6-16

每像数位数 (BPP) .............................................................................................................. 6-18

每像数位数（续） .............................................................................................................. 6-19

签名采集 ............................................................................................................................. 6-20

输出文件格式 ................................................................................................................ 6-20

签名采集文件格式选择 ....................................................................................................... 6-21

签名采集每像数位数 ........................................................................................................... 6-23

签名采集宽度 ..................................................................................................................... 6-25

签名采集高度 ..................................................................................................................... 6-26

viii DS7708 2D 竖直槽式扫描器产品参考指南

签名采集 JPEG 质量 ........................................................................................................... 6-27

视频取景器 .......................................................................................................................... 6-28

视频取景器图像尺寸 ............................................................................................................ 6-29

第 7 章 : USB 接口

简介 ........................................................................................................................................... 7-1

连接 USB 接口 .......................................................................................................................... 7-2

USB 默认参数 ........................................................................................................................... 7-4

USB 主机参数 ........................................................................................................................... 7-5

USB 设备类型 ..................................................................................................................... 7-5

Symbol Native API (SNAPI) 状态握手协议 ......................................................................... 7-9

USB 击键延迟 ..................................................................................................................... 7-10

USB 忽略大写锁定 .............................................................................................................. 7-12

USB 忽略未知字符 .............................................................................................................. 7-13

USB 将未知字符转换为 Code 39 ........................................................................................ 7-14

仿真键盘 .............................................................................................................................. 7-15

带前导零的键盘仿真 ............................................................................................................ 7-16

USB 键盘 FN1 替代 ............................................................................................................ 7-17

功能键映射 .......................................................................................................................... 7-18

模拟大写锁定 ...................................................................................................................... 7-19

转换大小写 .......................................................................................................................... 7-20

USB 静态 CDC .................................................................................................................... 7-22

直接 I/O 蜂鸣声 ................................................................................................................... 7-23

USB 传输速度参数 .............................................................................................................. 7-24

USB HID 轮询间隔 ........................................................................................................ 7-24

快速 HID 键盘 ............................................................................................................... 7-29

快速键盘仿真 ................................................................................................................ 7-30

IBM 规格版本 ...................................................................................................................... 7-31

可选 USB 参数 .......................................................................................................................... 7-32

蜂鸣声指令 .......................................................................................................................... 7-32

条码配置（类型）指令 ....................................................................................................... 7-33

USB 的 ASCII 字符集 ................................................................................................................ 7-34

第 8 章 : RS-232 接口

简介 ........................................................................................................................................... 8-1

RS-232 主机参数 ...................................................................................................................... 8-5

RS-232 主机类型 ................................................................................................................ 8-7

波特率 ................................................................................................................................. 8-11

奇偶校验 .............................................................................................................................. 8-14

检查接收错误 ...................................................................................................................... 8-16

硬件握手协议 ......................................................................................................................

8-17

无 .................................................................................................................................. 8-18

标准 RTS/CTS .............................................................................................................. 8-18

RTS/CTS 选项 1 ........................................................................................................... 8-19

RTS/CTS 选项 2 ........................................................................................................... 8-19

RTS/CTS 选项 3 ........................................................................................................... 8-20

软件握手协议 ...................................................................................................................... 8-21

无 .................................................................................................................................. 8-21

ACK/NAK ...................................................................................................................... 8-21

目录 ix

ENQ ............................................................................................................................. 8-22

ACK/NAK 与 ENQ ........................................................................................................ 8-22

XON/XOFF ................................................................................................................... 8-23

主机串口响应超时 .............................................................................................................. 8-24

RTS 线路状态 .................................................................................................................... 8-27

停止位选择 ......................................................................................................................... 8-28

数据位 ................................................................................................................................ 8-29

在 <BEL> 时蜂鸣 ................................................................................................................ 8-30

字符间延迟 ......................................................................................................................... 8-31

Nixdorf 蜂鸣声 / LED 指示器选项 ....................................................................................... 8-34

忽略未知字符 ..................................................................................................................... 8-36

RS-232 的 ASCII 字符集 .......................................................................................................... 8-37

第 9 章 : IBM 468X/469X 接口

简介 .......................................................................................................................................... 9-1

连接到 IBM 468X/469X 主机 .................................................................................................... 9-2

IBM 默认参数 ........................................................................................................................... 9-4

IBM 468X/469X 主机参数 ........................................................................................................ 9-5

端口地址 ............................................................................................................................. 9-5

将未知字符转换为 Code 39 ................................................................................................ 9-7

RS-485 蜂鸣声指令 ............................................................................................................ 9-8

条码配置（类型）指令 ...................................................................................................... 9-9

IBM-485 规格版本 .............................................................................................................. 9-10

第 10 章 : 键盘桥接接口

简介 .......................................................................................................................................... 10-1

连接键盘接口 ........................................................................................................................... 10-2

键盘默认参数 ........................................................................................................................... 10-4

键盘主机类型 ..................................................................................................................... 10-5

忽略未知字符 ..................................................................................................................... 10-6

击键延迟 ............................................................................................................................. 10-7

击键之间延迟 ..................................................................................................................... 10-9

备用数字键盘仿真 .............................................................................................................. 10-10

快速键盘仿真 ..................................................................................................................... 10-11

打开大写锁定 ..................................................................................................................... 10-12

忽略大写锁定 ..................................................................................................................... 10-13

转换大小写 ......................................................................................................................... 10-14

功能键映射 ......................................................................................................................... 10-16

FN1 替代 ............................................................................................................................ 10-17

发送通断命令 ..................................................................................................................... 1

0-18

键盘 ASCII 字符集 .................................................................................................................... 10-19

第 11 章 : SSI 接口

简介 .......................................................................................................................................... 11-1

通信 .......................................................................................................................................... 11-1

SSI 事务处理 ............................................................................................................................ 11-3

一般数据事务处理 .............................................................................................................. 11-3

ACK/NAK 握手协议 ...................................................................................................... 11-3

x DS7708 2D 竖直槽式扫描器产品参考指南

解码数据传输 ...................................................................................................................... 11-4

ACK/NAK 已启用且已分包数据 ..................................................................................... 11-4

ACK/NAK 已启用但未分包 ASCII 数据 ......................................................................... 11-4

ACK/NAK 已禁用且已分包 DECODE_DATA ................................................................ 11-4

ACK/NAK 已禁用但未分包 ASCII 数据 ......................................................................... 11-5

通信摘要 ................................................................................................................................... 11-5

RTS/CTS 线路 .................................................................................................................... 11-5

ACK/NAK 选项 .................................................................................................................... 11-5

数据位数 .............................................................................................................................. 11-5

串口响应超时 ...................................................................................................................... 11-5

重试 ..................................................................................................................................... 11-5

波特率、停止位、奇偶校验、响应超时时间、ACK/NAK 握手协议 ..................................... 11-5

错误 ..................................................................................................................................... 11-5

使用 SSI 通信时的注意事项 ...................................................................................................... 11-6

封装通过 SSI 发送的 RSM 命令 / 响应 ...................................................................................... 11-6

命令结构 .............................................................................................................................. 11-6

响应结构 .............................................................................................................................. 11-7

简单串行接口默认参数 .............................................................................................................. 11-7

SSI 参数 .................................................................................................................................... 11-9

选择 SSI 主机 ...................................................................................................................... 11-9

波特率 ................................................................................................................................. 11-10

奇偶校验 .............................................................................................................................. 11-14

检查奇偶性 .......................................................................................................................... 11-16

停止位 ................................................................................................................................. 11-17

软件握手协议 ...................................................................................................................... 11-18

主机 RTS 线路状态 ............................................................................................................. 11-19

解码数据包格式 ................................................................................................................... 11-20

主机串口响应超时 ............................................................................................................... 11-21

主机字符的超时 ................................................................................................................... 11-23

多数据包选项 ...................................................................................................................... 11-25

数据包间延时 ...................................................................................................................... 11-27

事件报告 ................................................................................................................................... 11-30

解码事件 .............................................................................................................................. 11-30

启动事件 .............................................................................................................................. 11-31

参数事件 .............................................................................................................................. 11-32

第 12 章 : 辅助扫描器

连接辅助扫描器 ......................................................................................................................... 12-1

对辅助扫描器编程 ......................................................

............................................................... 12-1

下载固件 .............................................................................................................................. 12-1

12VDC 电源要求 ....................................................................................................................... 12-2

使用辅助扫描器 ......................................................................................................................... 12-2

使用 Zebra 扫描器作为辅助扫描器 ..................................................................................... 12-2

使用不支持 RSM 命令的 Zebra 扫描器作为辅助扫描器 ...................................................... 12-2

使用非 Zebra 扫描器作为辅助扫描器 .................................................................................. 12-2

辅助扫描器 RSM 通信条码 .................................................................................................. 12-3

第 13 章 : 码制

简介 ........................................................................................................................................... 13-1

目录 xi

扫描序列示例 ........................................................................................................................... 13-1

扫描时的错误 ........................................................................................................................... 13-1

码制参数默认值 ........................................................................................................................ 13-2

启用 / 禁用所有代码类型 .......................................................................................................... 13-8

UPC/EAN ................................................................................................................................. 13-9

启用 / 禁用 UPC-A .............................................................................................................. 13-9

启用 / 禁用 UPC-E .............................................................................................................. 13-10

启用 / 禁用 UPC-E1 ............................................................................................................ 13-11

启用 / 禁用 EAN-8/JAN-8 ................................................................................................... 13-12

启用 / 禁用 EAN-13/JAN-13 ............................................................................................... 13-13

启用 / 禁用 Bookland EAN ................................................................................................. 13-14

Bookland ISBN 格式 .......................................................................................................... 13-15

解码 UPC/EAN/JAN Supplemental .................................................................................... 13-16

用户可编程 Supplemental .................................................................................................. 13-24

UPC/EAN/JAN Supplemental 冗余 .................................................................................... 13-25

UPC/EAN/JAN Supplemental AIM ID 格式 ........................................................................ 13-26

UPC 减少空白区 ................................................................................................................ 13-28

传送 UPC-A 校验位 ............................................................................................................ 13-29

传送 UPC-E 校验位 ............................................................................................................ 13-30

传送 UPC-E1 校验位 .......................................................................................................... 13-31

UPC-A 前同步信号 ............................................................................................................. 13-32

UPC-E 前同步信号 ............................................................................................................. 13-34

UPC-E1 前同步信号 ........................................................................................................... 13-36

将 UPC-E 转换为 UPC-A ................................................................................................... 13-38

将 UPC-E1 转换为 UPC-A ................................................................................................. 13-39

EAN-8/JAN-8 扩展 ............................................................................................................. 13-40

UCC 优惠券扩展码 ............................................................................................................. 13-41

优惠券报告 ......................................................................................................................... 13-42

ISSN EAN .......................................................................................................................... 13-44

Code 128 ................................................................................................................................. 13-45

启用 / 禁用 Code 128 ......................................................................................................... 13-45

为 Code 128 设置长度 ....................................................................................................... 13-46

启用 / 禁用 GS1-128 （以前为 UCC/EAN-128） ................................................................ 13-49

启用 / 禁用 ISBT 128 .......................................................................................................... 13-50

SBT 级联 ............................................................................................................................ 13-51

检查 ISBT 表 ...................................................................................................................... 13-53

ISBT 级联冗余 .................................................................................................................... 13-54

Code 128 减少空白区 ........................................................................................................ 13-55

Code 128 安全级别 ............................................................................................................ 13-

56

忽略 Code 128 <FNC4> ..................................................................................................... 13-58

Code 39 ................................................................................................................................... 13-59

启用 / 禁用 Code 39 ........................................................................................................... 13-59

启用 / 禁用 Trioptic Code 39 .............................................................................................. 13-60

将 Code 39 转换为 Code 32 .............................................................................................. 13-61

Code 32 前缀 ..................................................................................................................... 13-62

为 Code 39 设置长度 ......................................................................................................... 13-63

Code 39 校验位验证 .......................................................................................................... 13-66

传送 Code 39 校验位 ......................................................................................................... 13-67

Code 39 Full ASCII 转换 .................................................................................................... 13-68

Code 39 安全级别 .............................................................................................................. 13-69

Code 39 减少空白区 .......................................................................................................... 13-71

xii DS7708 2D 竖直槽式扫描器产品参考指南

Code 93 .................................................................................................................................... 13-72

启用 / 禁用 Code 93 ............................................................................................................ 13-72

为 Code 93 设置长度 .......................................................................................................... 13-73

Code 11 .............................................................................................................................. 13-76

为 Code 11 设置长度 .......................................................................................................... 13-77

Code 11 校验位验证 ........................................................................................................... 13-80

传送 Code 11 校验位 .......................................................................................................... 13-82

Interleaved 2 of 5 (ITF) ............................................................................................................. 13-83

启用 / 禁用 Interleaved 2 of 5 .............................................................................................. 13-83

I 2 of 5 校验位验证 .............................................................................................................. 13-87

传送 I 2 of 5 校验位 ............................................................................................................. 13-89

将 I 2 of 5 转换为 EAN-13 ................................................................................................... 13-90

I 2 of 5 安全级别 .................................................................................................................. 13-91

I 2 of 5 减少空白区 .............................................................................................................. 13-93

Discrete 2 of 5 (D 2 of F) ..................................................................................................... 13-94

为 Discrete 2 of 5 设置长度 ................................................................................................. 13-95

Codabar (NW - 7) ..................................................................................................................... 13-98

启用 / 禁用 Codabar ............................................................................................................ 13-98

为 Codabar 设置长度 .......................................................................................................... 13-99

CLSI 编辑 ............................................................................................................................ 13-102

NOTIS 编辑 ......................................................................................................................... 13-103

Codabar 安全级别 ............................................................................................................... 13-104

Codabar 大写或小写起始符 / 终止符检测 ............................................................................ 13-107

MSI ........................................................................................................................................... 13-108

启用 / 禁用 MSI ................................................................................................................... 13-108

为 MSI 设置长度 .................................................................................................................. 13-109

MSI 校验位 .......................................................................................................................... 13-112

传送 MSI 校验位 .................................................................................................................. 13-113

MSI 校验位算法 ................................................................................................................... 13-114

MSI 减少空白区 ................................................................................................................... 13-115

Chinese 2 of 5 ........................................................................................................................... 13-116

启用 / 禁用 Chinese 2 of 5 ................................................................................................... 13-116

Matrix 2 of 5 .............................................................................................................................. 13-117

启用 / 禁用 Matrix 2 of 5 ...................................................................................................... 13-117

为 Matrix 2 of 5 设置长度 .................................................................................................... 13-1

18

Matrix 2 of 5 校验位 ............................................................................................................ 13-120

传送 Matrix 2 of 5 校验位 .................................................................................................... 13-121

Korean 3 of 5 ............................................................................................................................ 13-122

启用 / 禁用 Korean 3 of 5 .................................................................................................... 13-122

邮政编码 ................................................................................................................................... 13-123

US Postnet .......................................................................................................................... 13-123

US Planet ............................................................................................................................ 13-124

传送 US Postal 校验位 ........................................................................................................ 13-125

UK Postal ............................................................................................................................ 13-126

传送 UK Postal 校验位 ........................................................................................................ 13-127

Japan Post .......................................................................................................................... 13-128

Australia Post ...................................................................................................................... 13-129

Australia Post 格式 .............................................................................................................. 13-130

Netherlands KIX Code ....................................................................................................... 13-132

USPS 4CB/One Code/Intelligent Mail ................................................................................. 13-133

UPU FICS Postal ................................................................................................................ 13-134

目录 xiii

Mailmark ............................................................................................................................ 13-135

颠倒 1D .................................................................................................................................... 13-136

GS1 DataBar ............................................................................................................................ 13-138

GS1 DataBar Limited ......................................................................................................... 13-139

GS1 DataBar Expanded .................................................................................................... 13-140

GS1 DataBar 安全级别 ...................................................................................................... 13-141

GS1 DataBar Limited 空白检查 .......................................................................................... 13-143

将 GS1 DataBar 转换为 UPC/EAN .................................................................................... 13-145

复合码 ...................................................................................................................................... 13-146

复合 CC-C .......................................................................................................................... 13-146

复合 CC-A/B ....................................................................................................................... 13-147

复合 TLC-39 ....................................................................................................................... 13-148

复合颠倒 ............................................................................................................................. 13-149

UPC 复合模式 .................................................................................................................... 13-150

复合蜂鸣声模式 .................................................................................................................. 13-152

UCC/EAN 复合代码的 GS1-128 仿真模式 ......................................................................... 13-154

2D 码制 .................................................................................................................................... 13-155

启用 / 禁用 PDF417 ............................................................................................................ 13-155

启用 / 禁用 MicroPDF417 ................................................................................................... 13-156

Code 128 仿真 ................................................................................................................... 13-157

Data Matrix ......................................................................................................................... 13-158

Data Matrix 颠倒 ................................................................................................................ 13-159

GS1 Data Matrix ................................................................................................................ 13-161

解码镜像（仅限 Data Matrix） ........................................................................................... 13-162

Maxicode ............................................................................................................................ 13-164

QR Code ............................................................................................................................ 13-165

Weblink QR ........................................................................................................................ 13-166

GS1 QR ............................................................................................................................. 13-167

MicroQR ............................................................................................................................. 13-168

Aztec .................................................................................................................................. 13-169

Aztec 颠倒 .......................................................................................................................... 13-170

Han Xin .............................................................................................................................. 13-172

Han Xin 颠倒 ...................................................................................................................... 13-173

Grid Matrix ......................................................................................................................... 13-175

Grid Matrix 颠倒 ................................................................................................................. 13-176

Grid Matrix 镜像 ................................................

................................................................. 13-178

DotCode ............................................................................................................................. 13-180

DotCode 颠倒 ..................................................................................................................... 13-181

DotCode 镜像 ..................................................................................................................... 13-183

DotCode 优先 ..................................................................................................................... 13-185

冗余级别 ................................................................................................................................... 13-186

冗余级别 1 .......................................................................................................................... 13-186

冗余级别 2 .......................................................................................................................... 13-186

冗余级别 3 .......................................................................................................................... 13-186

冗余级别 4 .......................................................................................................................... 13-187

安全级别 ................................................................................................................................... 13-189

字符间隔尺寸 ..................................................................................................................... 13-191

1D 空白区级别 ................................................................................................................... 13-192

宏 PDF 功能 ............................................................................................................................. 13-194

刷新宏缓冲区 ..................................................................................................................... 13-194

中止宏 PDF 输入 ................................................................................................................ 13-195

xiv DS7708 2D 竖直槽式扫描器产品参考指南

第 14 章 : OCR 编程

简介 ........................................................................................................................................... 14-1

OCR 参数默认值 ....................................................................................................................... 14-2

OCR 编程参数 .......................................................................................................................... 14-3

启用 / 禁用 OCR-A .............................................................................................................. 14-3

OCR-A 变体 ........................................................................................................................ 14-4

启用 / 禁用 OCR-B .............................................................................................................. 14-7

OCR-B 变体 ........................................................................................................................ 14-8

启用 / 禁用 MICR E13B ....................................................................................................... 14-15

启用 / 禁用美国货币序号 ..................................................................................................... 14-16

OCR 方向 ............................................................................................................................ 14-17

OCR 行数 ............................................................................................................................ 14-20

OCR 最小字符数 ................................................................................................................. 14-22

OCR 最大字符数 ................................................................................................................. 14-22

OCR 子集 ............................................................................................................................ 14-23

OCR 减少空白区 ................................................................................................................. 14-24

OCR 模板 ............................................................................................................................ 14-25

需要数字 (9) .................................................................................................................. 14-26

需要字母 (A) .................................................................................................................. 14-26

可选的字母数字 (1) ....................................................................................................... 14-27

可选字母 (2) .................................................................................................................. 14-27

字母或数字 (3) ............................................................................................................... 14-28

包括空格和拒绝字符在内的任何字符 (4) ....................................................................... 14-28

空格和拒绝字符之外的任何字符 (5) .............................................................................. 14-29

可选数字 (7) .................................................................................................................. 14-29

数字或填充 (8) ............................................................................................................... 14-30

字母或填充 (F) .............................................................................................................. 14-30

可选空格 ( ) ................................................................................................................... 14-31

可选小特殊字符 (.) ........................................................................................................ 14-31

其他模板运算符 ............................................................................................................. 14-32

文字字符串（" 和 +） .................................................................................................... 14-32

新行 (E) ......................................................................................................................... 14-33

字符串提取 (C) .............................................................................................................. 14-33

忽略到字段结束 (D) ....................................................................................................... 14-34

跳过直到 (P1) ................................................................................................................ 14-34

跳过直到不 (P0) ............................................................................................................ 14-35

重复上一个 (R) .............................................................................................................. 14-36

滚动直到匹配 (S) ........................................................................................................... 14-37

多个模板 ........................................................................................................................ 14-37

模板示例 ........................................................................................................................ 14-37

OCR 校验位模数 ................................................................................................................. 14-38

OCR 校验位乘数 ................................................................................................................. 14-39

OCR 校验位验证 ................................................................................................................. 14-40

无 .................................................................................................................................. 14-40

乘积从左向右相加 ......................................................................................................... 14-40

乘积从右向左相加 ......................................................................................................... 14-41

数字从左向右相加 ......................................................................................................... 14-41

数字从右向左相加 ......................................................................................................... 14-42

乘积从右向左相加简单余数 ........................................................................................... 14-42

数字从右向左相加简单余数 ........................................................................................... 14-43

健康行业 - HIBCC43 ..................................................................................................... 14-43

目录 xv

颠倒 OCR ........................................................................................................................... 14-44

OCR 冗余 ........................................................................................................................... 14-46

第 15 章 : 高级数据格式化

简介 .......................................................................................................................................... 15-1

附录 A: 标准默认参数

简介 .......................................................................................................................................... B-1

附录 B: 国家 / 地区代码

USB 和键盘国家 / 地区键盘类型（国家 / 地区代码） .............................................................. B-2

附录 C: 国家 / 地区代码页

简介 .......................................................................................................................................... C-1

国家 / 地区代码页默认值 .......................................................................................................... C-2

国家 / 地区代码页条码 .............................................................................................................. C-6

附录 D: CJK 解码控制

简介 .......................................................................................................................................... D-1

CJK 控制参数 ........................................................................................................................... D-2

Unicode 输出控制 .............................................................................................................. D-2

到 Windows 主机的 CJK 输出方法 ..................................................................................... D-3

非 CJK UTF 条码输出 ........................................................................................................ D-8

国家 / 地区键盘类型缺少字符 ....................................................................................... D-9

使用 Windows 主机设置 Unicode/CJK 解码 ............................................................................. D-10

为 Unicode 通用输出设置 Windows 注册表 ....................................................................... D-10

在 Windows 上添加 CJK IME ............................................................................................. D-10

在主机上选择简体中文输入法 ............................................................................................ D-11

在主机上选择繁体中文输入法 ............................................................................................ D-12

附录 E: 编程参考

Symbol 代码标识符 .................................................................................................................. E-1

AIM 代码标识 ........................................................................................................................... E-3

附录 F: 示例条码

Code 39 ................................................................................................................................... F-1

UPC/EAN ................................................................................................................................. F-1

UPC-A，100% ................................................................................................................... F-1

EAN-13，100% .................................................................................................................. F-2

Code 128 ................................................................................................................................. F-2

Interleaved 2 of 5 ..................................................................................................................... F-2

GS1 DataBar-14 ...................................................................................................................... F-3

PDF417 .................................................................................................................................... F-3

Data Matrix ............................................................................................................................... F-3

Maxicode .................................................................................................................................. F-3

xvi DS7708 2D 竖直槽式扫描器产品参考指南

QR Code ................................................................................................................................... F-4

Han Xin ..................................................................................................................................... F-4

US Postnet ................................................................................................................................ F-4

UK Postal .................................................................................................................................. F-4

附录 G: 数字条码

数字条码 ................................................................................................................................... G-1

0 .......................................................................................................................................... G-1

1 .......................................................................................................................................... G-1

2 .......................................................................................................................................... G-2

3 .......................................................................................................................................... G-3

4 .......................................................................................................................................... G-4

5 .......................................................................................................................................... G-5

6 .......................................................................................................................................... G-6

7 .......................................................................................................................................... G-7

8 .......................................................................................................................................... G-8

9 .......................................................................................................................................... G-9

取消 ........................................................................................................................................... G-10

附录 H: 签名采集代码

简介 ........................................................................................................................................... H-1

代码结构 ................................................................................................................................... H-1

签名采集区域 ...................................................................................................................... H-1

CapCode 图案结构 ............................................................................................................. H-2

开始 / 停止图案 ......................................................................................................................... H-2

尺寸 ........................................................................................................................................... H-3

数据格式 ................................................................................................................................... H-3

附加功能 ................................................................................................................................... H-4

签名框 ....................................................................................................................................... H-4

附录 I: 非参数属性

简介 ........................................................................................................................................... I-1

特性 ........................................................................................................................................... I-1

型号 ..................................................................................................................................... I-1

序列号 ................................................................................................................................. I-1

制造日期 .............................................................................................................................. I-2

首次编程日期 ...................................................................................................................... I-2

配置文件名 .......................................................................................................................... I-2

蜂鸣声 / LED ....................................................................................................................... I-3

参数默认值 .......................................................................................................................... I-4

下次启动时响蜂鸣声 ............................................................................................................ I-4

重新启动 .............................................................................................................................. I-4

主机触发会话 ...................................................................................................................... I-4

固件版本 .............................................................................................................................. I-4

Imagekit 版本 ...................................................................................................................... I-5

索引

关于本指南

简介

《DS7708 2D 竖直插槽扫描器产品参考指南》

提供了有关设置、操作、维护扫描器及排除故障的一般指示。

扫描器配置

a

列出了 DS7708 2D 竖直插槽扫描器的配置。

表 a.

DS7708 2D 竖直插槽扫描器配置

部件号描述

DS7708-DL00004ZZWW[1] 竖直投射区域成像仪，标准范围，带 DL 解析，有绳，午夜黑

vi DS7708 2D 竖直槽式扫描器产品参考指南

附件

表 b

列出了可用于 DS7708 2D 竖直插槽扫描器的附件。

表 b.

安装附件

部件号描述

11-TM0077-04 桌面安装支架 – DS7708 （午夜黑）。使扫描器能够使用双面胶或螺钉

固定到桌面上。

11-WM0077-04 墙壁安装支架 – DS7708 （午夜黑）。使扫描器能够使用螺钉固定到

墙上。

表 c.

电源

部件号描述

PWRS-14000-253R

电源，100 - 220VAC，输出 5V – 美国/加拿大/墨西哥/日本/中国台湾

PWRS-14000-255R

电源，100 - 220VAC，输出 5V – 巴西/韩国

PWRS-14000-256R

电源，100 - 220VAC，输出 5V – 欧洲/英国

PWRS-14000-257R

电源，100 - 220VAC，输出 5V – 中国

PWRS-14000-258R

电源，100 - 220VAC，输出 5V – 香港/澳大利亚

PWRS-14000-148R

电源，100 - 220VAC，输出 12V – 全球

PWRS-14000-148C

电源，100 - 240VAC，输出 12V – 全球

注：仅键盘需要此电源。

表 d.

USB 电缆

部件号描述

CBA-U21-S07ZAR

USB 电缆（屏蔽式 A 系列接口，7 英尺直线）

CBA-U23-S07ZAR

USB 电缆（屏蔽式 Power Plus 接口，7 英尺直线）

CBA-U28-C15ZAR

USB 电缆（屏蔽式 Power Plus 接口，15 英尺卷线）

CBA-U29-C15ZAR

USB 电缆（屏蔽式 A 系列接口，15 英尺卷线）

CBA-U30-S15ZAR

USB 电缆（屏蔽式 A 系列接口，15 英尺直线）

CBA-U32-C09ZAR

USB 电缆（屏蔽式 A 系列接口，9 英尺卷线）

CBA-U34-C09ZAR

USB 电缆（屏蔽式 Power Plus 接口，9 英尺卷线）

CBA-U35-S15ZAR

USB 电缆（屏蔽式 Power Plus 接口，15 英尺直线）

CBA-U42-S07PAR

USB 电缆（屏蔽式 A 系列接口，7 英尺直线），12 V

对于具有辅助扫描器的 DS7708，需要 PWRS-14000-148R 电源。

ページが読み込まれています...

Zebra DS7708 取扱説明書

Zebra DS7708 取扱説明書

関連論文

その他のドキュメント