Philips AC2936/86 Air Purifier ユーザーマニュアル

EN User manual 1 ZH-T 使用手冊 15

Original instruction by Philips

AC2936/86

1EN

Contents

1. Your.air.purier.. ��2

Product overview ��2

Controls overview ��3

2 Getting started ��3

Installing the lter ��3

Wi-Fi indicator ��4

Wi-Fi connection ��4

3. Using.the.air.purier.. ��5

Air quality light ��5

Turning On and O ��6

Changing the mode setting ��7

Switching the display indicator �� 7

Using the light on/o function ��8

Setting the child lock ��8

Checking the lter status ��9

4 Cleaning and maintenance ��9

Cleaning the body of the air purier ��9

Cleaning the particle sensor ��9

Cleaning the surface of the lter ��10

Replacing the lter ��11

Filter reset ��12

5 Storage �� 12

6 Troubleshooting �� 12

2EN

1 Your air purifier

Congratulations on your purchase of air cleaner AC2936.

To fully benet from the support that Philips oers, register your product at www.philips.com/welcome.

Product overview

Control panel Air outlet

Back cover

NanoProtect lter Series 3

(FY2180/30)

Particle sensor

3EN

Controls overview

2 Getting started

Installing.the.lter

Note: Make sure the air purier is unplugged from the electrical outlet before installing the lter.

1 2 3 4 5

1 Pull the back cover and remove it from the appliance.

2 Pull the lter from the appliance.

3 Remove all packaging materials of the air purication lter.

4 Put the lter back into the appliance.

5 Reattach the back cover�

Wi-Fi indicator

Filter cleaning alert

Filter replacement alert

Filter status/ reset button

Power on/o button

Mode display:

Auto ( )

Turbo ( )

Gentle ( )

Sleep ( )

Display switch button Mode switch button

Light on/o button

4EN

Wi-Fi indicator

Wi-Fi icon status Wi-Fi connection status

Blink in orange Connecting to the smartphone

Blink in white Connecting to the router

Stable in white Connected to the router

O Wi-Fi function disabled

Wi-Fi connection

Note:

• Corporate/Enterprise networks (e.g. certicates, network proles) are not supported. We

recommend setting up the Philips Air Puriers on a dedicated network created for IoT devices or

WPA2-Personal networks�

• Conguration details are provided in the Air+ app (e.g. Mac address) to help set-up on managed

networks�

First time connection

1 Download and install the Philips “Air+” app from the App Store or Google Play�

2 Connect your smartphone or tablet to your Wi-Fi network�

3 Launch the “Air+” app and click on “Connect a New Device” or press the “+”

button on the top of the screen. Follow the onscreen instructions to connect the air

purier to your network.

Reset the Wi-Fi connection

1 Touch and for 3 seconds until you hear a beep.

»The Wi-Fi indicator blinks orange�

2 Follow the steps 3 in “First time connection” section�

Note:

• Enterprise/Additional webpage authentication networks are not supported�

5EN

3 Using the air purifier

Air quality light

After approximately 30 seconds, the particle sensor selects the color that corresponds to the

surrounding air quality of airborne particles.

Note: The color of the air quality light is determined by the highest risk index among PM2.5, IAI and

readings�

IAI refers to the level of indoor air allergen.

IAI level Air quality light color Air quality level

1-3 Blue Good

4-6 Blue-purple Fair

7-9 Purple-red Poor

10-12 Red Very poor

PM2�5 refers to airborne particle pollutants smaller than 2.5 micrometers.

PM2�5 level Air quality light color Air quality level

≤12 Blue Good

13-35 Blue-purple Fair

36-55 Purple-red Poor

>55 Red Very poor

6EN

Turning.On.and.O

Note:

• Put the plug of the air purier in the power socket.

• If the purier stays connected to the electrical outlet after turning OFF, the air purier will operate

under the previous settings when turned ON again�

»Touch to switch on the air purier. »The “ ” displays on the screen during

warming up. Then the air purier shows

the IAI/PM2.5 level after measuring the air

quality�

3

s

»The air purier operates in the auto mode

with IAI displayed on the screen�

»Touch and hold the button for 3 seconds

to switch o the air purier.

7EN

Changing the mode setting

You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by touching the button�

Auto mode ( ): The air purier automatically

adjusts the fan speed in accordance with the

ambient air quality�

Turbo mode ( ): The air purier operates on

the highest speed�

Gentle mode ( ): The air purier operates at a

low speed�

Sleep mode ( ): The air purier operates

quietly at a low speed. After 3 seconds, the

screen lights o.

Switching the display indicator

Note:

• The appliance display IAI level by default.

8EN

Using.the.light.on/o.function

You can touch the light on/o button manually to turn o all lights and the control panel. Touch any

button to wake up all lights�

With the light sensor:

• The control panel can automatically turn on, turn o or dim according to the ambient light.

• The control panel will be o or dim when the ambient light is dark.

You can touch any button to wake up all lights. If no further operation, all lights will be o or dim again

to match with the ambient light�

Setting the child lock

3s

+

3s

+

1 Touch and hold and button for 3 seconds to activate child lock.

» displays on the screen, only and button light up�

»After 3 seconds, the screen goes back to normal display.

2 Touch and hold and button for 3 seconds again to deactivate child lock.

» displays on the screen for 3 seconds and goes back to normal display.

»All buttons light up�

9EN

Checking.the.lter.status

• Touch the lter status check/reset button to check the lter service life status�

Icon color Display (%)

Blue 16-100

Blue-purple 9-15

Purple-red 4-8

Red 0-3

Note: The appliance goes back to normal display if no operations after 3 seconds.

4 Cleaning and maintenance

Note:

• Do not attempt to clean the particle sensor with a vacuum cleaner�

• Switch o the air purier and unplug from the power socket before following action.

Cleaning.the.body.of.the.air.purier

Use a soft, dry cloth to clean both the interior and exterior of the air

purier and the air outlet.

Cleaning the particle sensor

Clean the particle sensor every 2 months for optimal functioning of the appliance.

1 Clean the particle sensor inlet and outlet

with a soft brush.

2 Clean the particle sensor with a damp cotton

swab� Dry all parts thoroughly with a dry

cotton swab�

10 EN

Cleaning.the.surface.of.the.lter

Clean the surface of lter with vacuum cleaner when the lter

cleaning alert display on the screen�

1 Pull the back

cover and

remove it from

the appliance�

2 Pull the lter

from the

appliance�

3 Clean the

surface of

the lter with

a vacuum

cleaner�

4 Put the lter

back into the

appliance�

5 Reattach the

back cover�

3

s

6 Touch the button to

switch on the appliance�

7 Touch and hold the lter

status check/reset button

for 3 seconds to reset the lter

cleaning time�

8 Wash your hands

thoroughly after

cleaning the lter.

11EN

Replacing.the.lter

Note:

• The lter is not washable or reusable.

• Do not smell the lter as it has collected pollutants from the air.

When the lter need to be replaced, the lter replacement alert

lights up red�

1 Replace the lter with Philips NanoProtect lter Series 3 (FY2180/30) , Please follow the step of

Chapter “Installing the lter”.

3

s

2 Touch the button to

switch on the appliance�

3 Touch and hold the lter

status check/reset button

for 3 seconds to reset the

lter replacement time.

4 Wash your hands

thoroughly after

replacing the lter.

12 EN

Filter reset

You can also replace the lter before lter replacement alert ( ) displays on the screen. After

replacing a lter, you need to reset the lter lifetime counter manually.

3

s

+

1 Touch the power button

for 3 seconds to turn o the

appliance and unplug from

power socket�

2 Put the power plug in

the power socket�

3 Within 15 seconds after power

on, touch and hold and

button for 3 seconds to reset the

lter lifetime counter.

5 Storage

1 Turn o the air purier and unplug from the power socket.

2 Clean the air purier, particle sensor and the surface of the lter (see the chapter “Cleaning and

maintenance”)�

3 Let all parts air dry thoroughly before storing.

4 Wrap the lter in air tight plastic bags.

5 Store the air purier, lter in a cool, dry location.

6 Always thoroughly wash hands after handling lters.

6 Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you

are unable to solve the problem with the information below, contact the Consumer Care Center in your

country�

Problem Possible solution

The appliance does not

work properly�

• The lter replacement alert has been on continuously but you have

not replaced the corresponding lter. As a result, the appliance is now

locked. In this case, replace the lter and long press to reset the lter

lifetime counter.

The airow that comes

out of the air outlet is

signicantly weaker

than before.

• The surface of the lter is dirty. Clean the surface of the lter (see the

chapter “Cleaning and maintenance”)�

13EN

Problem Possible solution

The air quality does not

improve, even though

the appliance has been

operating for a long

time�

• Check if the packing material is removed from the lter.

• The lter has not been placed in the appliance. Make sure that the lter

(FY2180/30) is properly installed�

• The particle sensor is wet� The humidity level in your room is high and

causes condensation� Make sure that the particle sensor is clean and dry

(see the chapter “Cleaning and maintenance”)�

• Room size is large or the outdoor air quality is poor�

For optimum purication performance, please close the doors and

windows when operating the air purier.

• There are indoor pollution resources. For instances, smoking, cooking,

incense, perfume or alchohol.

• Filter reaches the end of life. Replace the lter with a new one.

The color of the air

quality light always

stays the same�

• The particle sensor is dirty� Clean the particle sensor (see the chapter

“Cleaning and maintenance”)�

The appliance produces

a strange smell�

• The rst few times you use the appliance, it may produce a plastic smell.

This is normal. However, if the appliance produces a burnt smell even

if removing lters, contact your Philips dealer or an authorized Philips

service center. The lter may produce smell after being used for a while

because of the absorption of indoor gases. It’s recommended that you

reactivate the lter by putting it in direct sunlight for repeated use. If

odor still exists, replace the lter.

The appliance is extra

loud�

• It's normal if the appliance runs at the Turbo mode.

• In the Auto mode, if the appliance is too loud, maybe the appliance runs

at high speed because air quality becomes worse, or your personalized

setting in App triggers a higher fan speed. You can choose the Sleep

mode, or change the settings in the app.

• If anything drops into air outlet, it may also cause abnormal loud sound.

Immediate turn o appliance, turn appliance upside down, to get foreign

objectives out of appliance.

• If there is abnormal sound, contact the Consumer Care Center in your

country�

The appliance still

indicates that I need

to replace a lter, but I

already did�

• Perhaps you did not reset the lter lifetime counter. Switch on the

appliance� Then touch and hold the reset button ( ) for 3 seconds.

Error code “E1” displays

on the screen�

• The motor has malfunctions. Contact the Consumer Care Center in your

country�

14 EN

Problem Possible solution

The Wi-Fi setup is not

successful.

• If the router your purier is connected to is dual – band and currently it

is not connecting to a 2.4GHz network, please switch to another band

of the same router (2.4GHz) and try to pair your purier again. 5GHz

networks are not supported. If your purier is connected to a dual – band

router, please switch to the 2.4GHz network of the router and try to pair

your purier again.

• Web authentication networks are not supported�Public Wi-Fi such as

oce or hotel networks are not supported.

• Check if the purier is within range of the Wi-Fi router. You can try to

locate the air purier closer to the Wi-Fi router.

• Check if the Wi-Fi password is correct. The password is case-sensitive.

• Retry the setup with the instructions in section “Reset the Wi-Fi

connection”�

• Keep the appliance away from other electronic devices that may cause

interferences.

• Check if the mobile device is in airplane mode. Make sure to have the

airplane mode deactivated when connecting to the Wi-Fi network�

• If the Wi-Fi pairing fails after trying several times, please turn of the

cellular data on your smartphone in the Settings section and start the

pairing again�

• If the Wi-Fi icon on your purier’s display is in stable white but without

seeing the purier in your app, click on “Connect a New Device” and add

the purier from the local list on “Begin setup” page.

• Consult the help section in the app for extensive and up-to-date

troubleshooting tips�

15ZH-T

內容

1 您的空氣清淨機 �� 16

產品概覽 ��16

控制項概覽 ��17

2 快速入門 �� 17

安裝濾網 ��17

Wi-Fi 指示燈 ��18

Wi-Fi 連線 ��18

3 使用空氣清淨機 �� 19

空氣品質指示燈 ��19

開啟和關閉電源 ��20

變更模式設定 ��21

切換顯示指示燈 ��21

使用開/關燈按鈕 ��22

設定兒童鎖 ��22

檢查濾網狀態 ��23

4 清潔與維護 �� 23

清潔空氣清淨機的機體 ��23

清潔微粒感測器 ��23

清潔濾網表面 ��24

更換濾網 ��25

濾網重設 ��26

5 收納 �� 26

6 疑難排解 �� 26

16 ZH-T

1 您的空氣清淨機

恭喜您購買空氣清淨機 AC2936。

若要獲得飛利浦提供的完整支援，請註冊您的產品： www�philips�com/welcome。

產品概覽

控制面板出風口

背蓋

奈米級勁護濾網 S3型

(FY2180/30)

微粒感測器

17ZH-T

控制項概覽

2 快速入門

安裝濾網

備註：請確定已從電源插座拔除空氣清淨機的電源插頭後，再安裝濾網。

1 2 3 4 5

1 拉動背蓋並將其從產品上取下。

2 從產品拉出濾網。

3 拆下空氣淨化濾網的所有包裝材料。

4 將濾網裝回產品。

5 將背蓋重新裝回。

Wi-Fi 指示燈

濾網清潔警示

濾網更換警示

濾網狀態/ 重設按鈕

電源開關按鈕

模式顯示：

自動 ( )

加速增強 ( )

溫和 ( )

睡眠 ( )

顯示切換按鈕模式切換按鈕

開/關燈按鈕

18 ZH-T

Wi-Fi 指示燈

Wi-Fi 圖示狀態 Wi-Fi 連線狀態

閃爍橘燈正在連線至智慧型手機

閃爍白燈正在連線至路由器

穩定白燈已連線至路由器

熄滅 Wi-Fi 功能已停用

Wi-Fi 連線

備註：

• 不支援公司/企業網路 (如憑證、網路設定檔)。建議於專為 IoT 裝置建立的專用網路或 WPA2-Personal

網路上設定飛利浦空氣清淨機。

• 如需在受管理網路上協助設定，Air+ 應用程式有提供組態詳細資料 (如 Mac 位址)。

首次連線

1 下載並安裝飛利浦「Air+」應用程式，下載位置如下： App Store 或 Google Play。

2 將您的智慧型手機或平板電腦連線至 Wi-Fi 網路。

3 啟動「Air+」應用程式，並按一下「連接新裝置」或按下畫面上方的「+」按鈕。

依照螢幕指示將空氣清淨機連接至您的網路。

重設 Wi-Fi 連線

1 按下和 3 秒鐘，直到聽到嗶聲。

»Wi-Fi 指示燈會閃爍橘光。

2 請依照「首次連線」一節的步驟 3 操作。

備註：

• 不支援企業/額外網頁驗證網路。

ページを読み込んでいます...

Philips AC2936/86 Air Purifier ユーザーマニュアル

関連論文