Roland GS2-24 Desktop Sign Maker Vinyl Cutter ユーザーマニュアル

  • こんにちは!Roland VersaSTUDIO GS2-24ユーザーマニュアルの内容を理解しました。このカッティングプロッターの使用方法、安全性、メンテナンスなどに関するご質問にお答えできます。例えば、部品の交換方法や、安全上の注意事項など、お気軽にご質問ください。
  • 部品の取り付けや取り外し、清掃を行う際は、電源コードを抜く必要がありますか?
    子供が機械に近づかないようにするにはどうすればよいですか?
    故障した場合、どうすればよいですか?
    延長コードを使用できますか?
Copyright © 2022 Roland DG Corporation
http://www.rolanddg.com/
R1-220222TW
Safety Precautions......................................................................................2
Usage Precautions...................................................................................................... 3
To Ensure Safe Use.................................................................................................................. 4
This is a heavy machine. .................................................................................................... 5
Incorrect operation may cause injury ..................................................................................... 6
Danger of electrical short, electrical shock, or fire .................................................................... 7
Warning Labels................................................................................................................ 9
Other important notes ............................................................................................... 10
Disclaimers and Standard Information..........................................................................................11
Locations of the Power Rating and Serial Number Labels ...................................................................15
Contents
1
Safety Precautions
2
Usage Precautions
To Ensure Safe Use ...................................................................................... 4
This is a heavy machine. ......................................................................... 5
Incorrect operation may cause injury.......................................................... 6
Danger of electrical short, electrical shock, or fire ......................................... 7
Warning Labels..................................................................................... 9
Usage Precautions 3
Improper handling or operation of this machine may result in injury or damage to property. Points that
must be observed to prevent such injury or damage are described as follows.
Meaning of WARNING and CAUTION
WARNING Used for instructions intended to alert the user to the risk of death or severe injury should the
unit be used improperly.
CAUTION Used for instructions intended to alert the user to the risk of injury or material damage should the
unit be used improperly.
*Material damage refers to damage or other adverse effects caused with respect to the home and
all its furnishings as well as to domestic animals or pets.
About the Symbols
The symbol alerts the user to important instructions or warnings.
The specific meaning of the symbol is determined by the design contained within the symbol.
The symbol at left means "danger of electrical shock."
The symbol alerts the user to items that must never be carried out (are forbidden).
The specific meaning of the symbol is determined by the design contained within the symbol.
The symbol at left means the unit must never be disassembled.
The symbol alerts the user to things that must be carried out.
The specific meaning of the symbol is determined by the design contained within the symbol.
The symbol at left means the power-cord plug must be unplugged from the outlet.
To Ensure Safe Use
4 Usage Precautions
This is a heavy machine.
CAUTION
Install in a level and stable location.
Failure to do so may result in falling of the machine, leading to injury.
To Ensure Safe Use
Usage Precautions 5
Incorrect operation may cause injury
WARNING
Always unplug the power cord when attaching or removing parts and optional parts
and when performing cleaning or maintenance that does not require the machine to
be connected to a power source.
Attempting such operations while the machine is connected to a power source may result in injury
or electrical shock.
Keep children away from the machine.
The machine includes areas and components that pose a hazard to children and may result in in‐
jury, blindness, choking, or other serious accident.
Never attempt to disassemble, repair, or modify the machine.
Doing so may result in fire, electrical shock, or injury. Entrust repairs to a trained service techni‐
cian.
Be sure to follow the operation procedures described in the user's manual. Never al‐
low anyone unfamiliar with the usage or handling of the machine to touch it.
Incorrect usage or handling may lead to an accident.
Never operate the machine while tired or after ingesting alcohol or any medication.
Operation requires unimpaired judgment. Operating with impaired judgment may result in an acci‐
dent.
Never attempt to disassemble, repair, or modify the AC adapter.
Doing so may result in fire, electrical shock, or injury. Entrust repairs to a trained service techni‐
cian.
CAUTION
Conduct operations in a clean, brightly lit location.
Working in a location that is dark or cluttered may lead to an accident, such as becoming caught in
the machine as the result of an inadvertent stumble.
Never climb or lean on the machine.
The machine is not made to support a person. Climbing or leaning on the machine may dislodge
components and cause a slip or fall, resulting in injury.
Caution: cutting tool.
This machine has a cutting tool. To avoid injury, handle the tool with care.
Never attempt operation while wearing a necktie, necklace, loose clothing, or
gloves. Bind long hair securely.
Such items may become caught in the machine, resulting in injury.
Exercise caution to avoid being pinched or becoming caught.
Inadvertent contact with certain areas may cause the hand or fingers to be pinched or become
caught. Use care when performing operations.
To Ensure Safe Use
6 Usage Precautions
Danger of electrical short, electrical shock, or fire
WARNING
Connect to an electrical outlet that complies with this machine's ratings (for volt‐
age, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
If sparks, smoke, burning odors, unusual sounds, or abnormal operation occur, im‐
mediately unplug the power cord. Never use if any component is damaged.
Continuing to use the machine may result in fire, electrical shock, or injury. Contact your author‐
ized Roland DG Corporation dealer.
Never use outside or in any location where exposure to water or high humidity may
occur. Do not touch the power cord, plug, or electrical outlet with wet hands.
Doing so may result in fire or electrical shock.
Never allow any foreign object to get inside. Never expose the machine to liquid
spills.
Inserting objects such as coins or matches or allowing beverages to be spilled into the ventilation
ports may result in fire or electrical shock. If anything gets inside, immediately disconnect the
power cord and contact your authorized Roland DG Corporation dealer.
Never place any flammable object nearby. Never use a combustible aerosol spray
nearby. Never use in any location where gases can accumulate.
Combustion or explosion could occur.
Handle the power cord, plug, and electrical outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in fire or electrical shock.
When using an extension cord or power strip, use one that adequately satisfies the
machine's ratings (for voltage, frequency, and current).
Use of multiple electrical loads on a single electrical outlet or of a lengthy extension cord may
cause fire.
Position the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency. Install the
machine next to an electrical outlet. Also, provide enough empty space to allow immediate access
to the electrical outlet.
For accessories (optional and consumable items, power cord, and the like), use only
genuine articles compatible with this machine.
Incompatible items may lead to an accident.
Never use the machine for any purpose for which it is not intended, or use the ma‐
chine in an excessive manner that exceeds its capacity.
Doing so may result in injury or fire.
Do not use the supplied power cord and AC adapter with any other product.
If the machine will not be used for a long period, disconnect the power cord.
This prevents an accident caused by unexpected electric leakage or unintentional start of the ma‐
chine.
To Ensure Safe Use
Usage Precautions 7
Important notes about the power cord, plug, and electrical outlet
Never place any object on top or sub‐
ject to damage. Never allow to get wet. Never bend or twist with excessive
force.
Never make hot. Never pull with excessive force. Dust may cause fire.
Never bundle, bind, or roll up.
To Ensure Safe Use
8 Usage Precautions
Warning Labels
Warning labels are affixed to the machine to make areas of danger immediately clear. The meaning of
this label is indicated below. Be sure to heed this warning. Also, never remove the labels or allow
them to become dirty.
Beware of moving carriage
The cutting carriage is dangerous because it moves at high speed. Do not
put hands near it.
To Ensure Safe Use
Usage Precautions 9
Other important notes
Disclaimers and Standard Information ..............................................................11
Locations of the Power Rating and Serial Number Labels ........................................15
10 Other important notes
Company names and product names are trademarks or registered trademarks of their respective
holders.
Thank you very much for purchasing this product.
To ensure correct and safe usage with a full understanding of this product's performance, read
through this manual completely and store it in a safe location.
Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
The contents of this operation manual and the specifications of this product are subject to change
without notice.
The operation manual and the product have been prepared and tested as much as possible. If you
find any misprint or error, please inform Roland DG Corporation.
DGSHAPE Corporation assumes no responsibility for any direct or indirect loss or damage which
may occur through use of this product, regardless of any failure to perform on the part of this
product.
DGSHAPE Corporation assumes no responsibility for any direct or indirect loss or damage which
may occur with respect to any article made using this product.
For the USA
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
Responsible Party: Roland DGA Corporation
Address: 15363 Barranca Parkway Irvine, CA 92618, U.S.A.
Telephone 949-727-2100
Type of Equipment: Cutting Plotter
Model Name: GS2-24
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Use only I/O cables that have been designed and manufactured specifically for this device.
For Canada
CAN ICES-3 (A)/NMB-3(A)
For EU Countries
Disclaimers and Standard Information
Other important notes 11
Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN
The importer in the EU:
Roland DG EMEA N.V.
Bell Telephonelaan 2G, 2440 Geel, Belgium
For UK
Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN
The importer in the UK:
Roland DG (U.K.) Ltd.
Griffin House, Windmill Road, Clevedon Business Park, Clevedon, North Somerset, BS21 6UJ, United
Kingdom
Disclaimers and Standard Information
12 Other important notes
For EU Countries
WARNING Operation of this equipment in a residential environment could cause radio in‐
terference.
For EU Countries
This product must be disposed of
separately at your local waste recycling
center. Do not dispose of in household
waste bin.
Bitte führen Sie dieses Produkt separat
Ihrer örtlichen Entsorgungsstelle zu.
Bitte nicht mit dem normalen Hausmüll
entsorgen.
Ne jetez pas le produit avec vos
ordures ménagères. Portez-le dans un
centre recyclage des déchets.
Questo prodotto deve essere smaltito
negli appositi contenitori per la raccolta
differenziata, non buttare nel cestino
dei rifiuti casalinghi.
Este producto debe devolverse al
centro de reciclaje más cercano a su
domicilio para su correcta eliminación.
No lo tire a la basura.
Deite fora separadamente este produto
no seu centro de reciclagem local. Não
o deite fora no seu caixote do lixo.
Lever dit product in bij een lokaal
afvalverzamelpunt. NIET met normaal
huishoudelijk afval afvoeren.
Dette Produkt skal smides særskilt
væk på den lokale affalds- og
genbrugsstation. Må ikke smides ud
sammen med almindeligt
husholdningsaffald.
Tätä tuotetta ei saa hävittää
normaalien talousjätteiden mukana,
vaan se on toimitettava
ongelmajätteiden keräilypisteeseen
hävitettäväksi.
Produkten måste kasseras separat på
din lokala återvinningscentral. Släng
inte produkten tillsammans med
hushållssoporna.
Μην πετάξετε το αντικείμενο αυτό στο
καλάθι των απορριμμάτων. Αφαιρέστε
τις μπαταρίες και προσκομίστε το στο
τοπικό κέντρο ανακύκλωσης.
Disclaimers and Standard Information
Other important notes 13
For China
产品中有毒有害物质或元素的名称及含量
部件名称
有毒有害物质或元素
铅(Pb) 汞(Hg) 镉(Cd) 六价铬
(Cr(Ⅵ))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板 ×
头部 ×
壳体、底架 ×
电源 ×
其他(电缆、附件等) ×
○:表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下。
×:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求。
保使用期限
此标志适用于在中国国内销售的电子信息产品,表示环保使用期限的年数。
所谓环保使用期限是指在自制造日起的规定期限内,产品中所含的有害物质
不致引起环境污染,不会对人身、财产造成严重的不良影响。
环保使用期限仅在遵照产品使用说明书,正确使用产品的条件下才有效。
不当的使用,将会导致有害物质泄漏的危险。
For California
WARNING
This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Disclaimers and Standard Information
14 Other important notes
Serial Number
This is required when you seek maintenance, servicing, or support. Never peel off the label.
Serial Number
Power Rating
Use an electrical outlet that meets the requirements for voltage, frequency, and amperage given on
the label.
Power Rating
Locations of the Power Rating and Serial Number
Labels
Other important notes 15
Précautions de sécurité ............................................................................... 2
Précautions d’emploi .................................................................................................. 3
Pour utiliser en toute sécurité.................................................................................................... 4
Cet appareil est lourd. ...................................................................................................... 5
Une utilisation incorrecte peut causer des blessures ................................................................... 6
Risque de décharge ou de choc électrique, d’électrocution ou d’incendie......................................... 7
Vignettes d’avertissement .................................................................................................. 9
Autres remarques importantes...................................................................................... 10
Disclaimers and Standard Information..........................................................................................11
Emplacements des étiquettes de Puissance nominale et de Numéro de série ...........................................15
Sommaire
1
Précautions de sécurité
2
Précautions d’emploi
Pour utiliser en toute sécurité......................................................................... 4
Cet appareil est lourd. ........................................................................... 5
Une utilisation incorrecte peut causer des blessures........................................ 6
Risque de décharge ou de choc électrique, d’électrocution ou d’incendie ............. 7
Vignettes d’avertissement ....................................................................... 9
Précautions d’emploi 3
/