Roland RD-300NX 取扱説明書

Roland RD-700NXとRD-300NXキーボードのユーザーマニュアルの内容を読み込みました。このマニュアルでは、自動電源オフ機能の設定方法や、電源の再投入方法、設定の保存方法などが詳しく説明されています。デバイスに関するご質問がありましたら、お気軽にお尋ねください。
自動電源オフ機能をオフにしたいのですが、どのようにすればよいですか？

自動電源オフ機能で電源が切れた後、電源を入れ直すにはどうすればよいですか？

設定は保存されますか？

With the factory settings, this product’s power will automatically be switched o 240 minutes

(4 hours) after you stop playing or operating the unit. If you don’t want the unit to turn o

automatically, change the “Auto O” setting to “O” as described below.

1. Press the [MENU] button.

The [MENU] button indicator will light.

2. Use the cursor [ ] [ ] buttons to select “0.System.”

3. Press the [ENTER] button.

The “EDIT [System]” screen will appear.

4. Use the cursor [ ] [ ] to switch screens, and use the cursor [ ] [ ] buttons to

choose “Auto O.”

5. Use the [DEC] [INC] buttons to change the setting.

Value Explanation

O The power will not turn o automatically.

240min (Default)

The power will automatically turn o if no operation is performed for 240 minutes (4

hours).

The setting will be stored internally, and will still be in eect the next time this unit starts up.

When turning the unit’s power back on after it has been shut down

due to the Auto O function

Turn the [POWER ON] switch (or the [POWER] button) o; then wait for at least ve seconds

and turn it on.

If you fail to allow a sucient interval after turning the switch or button o, the power

might not turn on correctly.

Auto O Setting

permission of ROLAND CORPORATION.