AUSounds AU-X ユーザーマニュアル

カテゴリー
モバイルヘッドセット
タイプ
ユーザーマニュアル
X ANC
USER MANUAL
Manuel d'utilisation | Manual
Manuale d'uso | Benutzer-Handbücher
Manual de Usuario | 사용 매뉴얼
|
Ausounds Intelligence, LLC.
15300 Ventura Blvd., Suite 214
Sherman Oaks, California 91403, USA
www.ausounds.com
Designed by Ausounds in California | Made in China
ConçuparAusoinds,Californie,fabriquéenChine
ProjetadopelaAusoundsnaCalifórnia|FabricadonaChina
ProgettatodaAusoundsinCalifornia,prodottoinCina
EntworfenvonAusoundsofCalifornia,hergestelltinChina
DiseñadaporAusoundsenCalifornia|HechaenChina
California의Ausounds회사가디자인,중국제조
CaliforniaAusounds
Ausounds
Aircraft Insertion 3.5mm to 3.5mm
Audio Cable
Thank you for purchasing the AU-X ANC Planar Magnetic Wireless
Over-Ear headphones. Please read the user manual carefully before
using this product, and keep it for future reference.
The AU-X ANC is engineered for performance and is equipped with our
AU planar magnetic driver to deliver incredible Hi-Res audio in both
wireless Bluetooth® and wired connections. Enjoy your music in any
environment with Soundproof Active Noise Cancellation.
CONTENTS
Please check if the following parts in the package are complete.
Headphone Carrying Case 6.3mm to 3.5mm Plug
Type-C Interface
Charging Cable
PRODUCT DESCRIPTION
Charge the headphones for 1 hour before using them for the first time.
Connect the AU-X ANC to the USB-C charger. The LED indicator will
show a red light to indicate that the headphone is charging. A full charge
takes about 2 hours when the battery is fully depleted. Once the LED
indicator turns off, the headset is fully charged. This product supports
rapid charging and can be used for 2 to 3 hours after 15 minutes of
charging.
STORING YOUR AU-X ANC
Safely store your headphones with the included carrying case as shown
in the figure below.
PAIRING
On/Off
Power On
Power Off
Power Button
Long press for 2 sec
Long press for 3 sec
LED Indicator
Blue light flashes 2 times
Blue light is on for 2 sec
IN-FLIGHT STORAGE
Your carrying case is designed
with a cable pocket for the
provided accessories.
BLUETOOTH PAIRING
Press and hold the power button on your headphone to initiate
Bluetooth pairing search mode. On the device you wish to pair with,
select Bluetooth settings and enable Bluetooth. In the list of available
devices, find and select “AU-X ANC to initiate pairing. (Android
devices vary by system).
WARRANTY CARD
AUTOMATIC CONNECTION
The AU-X ANC stores your last connected device in memory. If your
headphones are disconnected due to being out of range, they will
automatically reconnect once in range. To pair your headphone to a new
device press and hold the power button for 7 sec until the headphone
enters the search pairing mode. If it is disconnected for more than 30
minutes, select the Bluetooth name in your device to connect again. If it
is disconnected for more than 2 hours, it will automatically shut down.
NFC FAST PAIRING
The AU-X ANC is equipped with NFC fast pairing. To use this option, turn
on the NFC function of your device. Then simply touch the device to the
NFC mark on the headphone as seen below. Hold the headphone against
the device until they are paired. Please refer to your devices instruction
manual for the designated NFC touch location.
ANC ACTIVE NOISE CANCELLATION
The active noise cancellation function is turned on by default. Toggle
through the various modes by short pressing the ANC button twice.
The voice will prompt: “ANC ON”, “Monitor mode”, “ANC OFF”.
QUICKLY SWITCH THE MONITOR MODE
Cover the touch panel on the right ear cup with your hand, to switch to
ambient sound mode, remove your hand to return to the previous
mode.
VOICE ASSISTANTS
To initiate the voice assistant feature touch the center of right ear cup
3 times. Your connected device’s voice function will initiate allowing
you to issue vocal commands through your headphone.
AUTO-WEAR DETECTION
The music will automatically pause after removing the headphones,
and the touch pad is no longer effective. The music will play automati-
cally upon wear detection.
SWAPPING CALLS TO DEVICE
When calling or receiving calls, press and hold the top of the touch
pad for 2 sec to switch from the headphones to your device to answer.
CONTROLS ( Right Side )
Play/Pause
Increase volume
Decrease volume
Next track
Previous track
Tap the ear cup twice to play or pause your music
Touch and slide the ear cup up to increase the volume.
Sliding to the edge and holding will continue to
increase the volume.
Touch and slide the ear cup down to reduce the
volume. Sliding to the edge and holding will continue to
decrease the volume.
Touch and slide towards the back of your head to play
the previous track.
Touch and slide forward to play the next track
Answer call
End call
Decline call
Voice assistant
Switching calls
Pairing mode
Double tap the ear cup
Double tap the ear cup
Press and hold the ear cup for 1 sec
Touch the center of the ear cup 3 times
Touch and hold the center of the right ear cup
Press and hold the power button for 7 sec
AUXILIARY
To connect your headphones using the auxillary port. Insert the
provided 3.5mm plug to your auxillary source device. The auxillary
connection overrules any Bluetooth connections and will interrupt
audio. Bluetooth will automatically be renabled once the auxillary
3.5mm plug is disconnected.
NOTE: Since auxillary audio does not require power, you can listen to
your headphone with the power off using the auxillary connection.
NOTICE: In order to listen to music with Hi-res audio performance,
please make sure to use the provided cable instead of wireless
connection.
SPECIFICATIONS
Bluetooth Version
Bluetooth Protocol
Bluetooth Range
ANC Depth
Auto-wear Detection
Driver Type
Driver Size
Impedance
Frequency Range
SPL
Battery Life
Battery Capacity
Charging Time
Weight
Waterproof level
BT 5.0
SBC, AAC, aptX, aptX HD
10m | 32 ft
28db
Yes
Planar Magnetic Driver
61*51mm
32 ohms
20Hz-40kHz
102 +/-3db
25 Hours
1050mAh
2 Hours
357g
IPX5
SAFETY INSTRUCTIONS
• Do not attempt to make any modifications to the product, including removing or
modifying the product, as the damage is not covered by the warranty.
• Do not place the product in extremely high or low ambient temperatures for
extended periods of time. Extreme temperatures can cause equipment to
deform, and reduce the charging capacity of the device.
• Thunderstorm weather may affect the normal use of the product and there is a
risk of electric shock, so please do not use the earphones outside during
thunderstorms.
• This product contains small parts. Do not swallow it to avoid danger. Keep the
product out of the reach of children.
• Using the product for a long time at high volume may affect your hearing,
please control the volume.
• If this product supports active noise cancellation. Please do not turn this
function on when walking, driving, or cycling to avoid accidents.
BATTERY WARNING
This product contains lithium battery, please do not disassemble, impact, squeeze
or put into fire. Please do not place the product under high temperature or hot sun,
beware of explosion. If there is swelling, leakage, odor or any other abnormality in
the battery compartment of the product, do not continue to use it. Please dispose
of used batteries properly in accordance with local regulations.
WARNING
Do not subject the product to excessive shock. If your product has touch sensor,
do not apply stickers or other adhesive items to the touch sensor control panel. Be
careful not to catch your finger in the unit when folding. The Bluetooth function
may not work with a mobile phone, depending on the signal conditions and the
surrounding environment. Do not apply weight or pressure to the product for long
periods, including when it is stored, as it may cause deformation. If you experience
discomfort while using the product, stop using it immediately. If this product has
earpads/ ear tips they may be damaged or deteriorate with long-term use and
storage.
CLEANING THE UNIT
When the outside of the product is dirty, clean it by wiping with a soft dry cloth. If the
product is particularly dirty, soak a cloth in a dilute solution of neutral detergent, and
wring it well before wiping. Do not use solvents such as thinner, benzene, or alcohol,
as they may damage the surface.
DO NOT USE THE HEADSET NEAR MEDICAL DEVICES
This product has magnets which may interfere with pacemakers, defibrillators and
programmable shunt valves or other medical devices. Do not put this product close to
these medical devices and the person who use any of these medical devices. Consult
your doctor before using this product, if you have any concerns.
DO NOT PLACE CARDS WITH MAGNETS
IN THE VICINITY OF THE HEADSET
This product has magnets. Placing cards with magnets in the vicinity of the product
may affect the magnetism of the card and render it unusable.
READ ALL INSTRUCTIONS BEFORE USE AND
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This device complies with FCC radiation exposure limits
set forth for an uncontrolled environment.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
ISEDC STATEMENT
This device complies with Innovation, Science, and Economic Development
Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’ Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil
nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe b est conforme à la norme nmb - 003 du canada.
ISEDC RF EXPOSURE STATEMENT
The device is compliance with RF exposure guidelines, users can obtain Canadian
information on RF exposure and compliance.
LE PSENT APPAREIL EST CONFORME
Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,
les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and
compliance d’acquérir. les informations correspondantes.
PRODUCT WARRANTY
Ausounds Intelligence warrants this product to the original purchaser to be free from
defects in material and workmanship, under normal conditions for a period of 1-year
for parts and labor only from the date of original purchase. Ausounds agrees at our
option during the warranty period, to repair any defect in material or workmanship or
to furnish an equal product in exchange without repair charges, during the first 365
days. After 365 days, a flat labor rate may be required and payment sent along with
the product. Except where prohibited by applicable law, this warranty is
nontransferable and is limited to the original purchaser and the country in which the
product was purchased. This warranty gives you specific legal rights, and you may
also have other rights, including a longer warranty duration that may vary under local
laws. If you do not find a solution on our website, please contact the retailer from
whom you made your purchase. Valid warranty claims are generally processed
through the point-of-purchase retailer during the first thirty (30) days after purchase.
This period of time may vary depending on the retailer. If your warranty claim cannot
be processed through the point-of-purchase retailer, please contact our support
department at support@ausounds.com or call direct at 1-818-873-0113.
Please follow these directions to return your product:
1. Contact Ausounds support at support@ausounds.com or 818-873-0113 to
receive a return authorization
2. Pack the unit in a well-padded sturdy carton if you do not have the original
packaging
3. Enclose a copy of your sales receipt to validate the date of purchase
4. Ausounds will elect to repair or replace the product free of repair charges during
the first 365 days. After 365 days, payment for labor may need to be sent with the
product. Call customer support at 818-873-0113 or email
Ausounds Intelligence
Attention: Warranty Services
3190 Chicago Ave Riverside, CA 92507-3448 US
NOTE: This warranty does not cover any product which has been subject to damage
due to misuse, neglect, accidental damage, abuse, commercial use, or any product
modifications. This warranty does not cover damage due to improper operation or
maintenance, connection to an improper voltage supply, or attempted repair by
anyone other than Ausounds. This warranty does not cover products sold AS IS or
refurbished units. For consumers, who are covered by consumer protection laws or
regulations in their country of purchase or, if different, their country of residence,
the benefits conferred by Ausounds’ Limited Warranty are in addition to all rights
and remedies driven by such consumer protection laws and regulations , including
but not limited to these additional rights.
National Statutory Rights
Consumers have legal rights under applicable national legislation governing the
sale of consumer goods. Such rights are not affected by the warranties in this
Limited Warranty. In Brazil, remedies include the consumer’s option to keep the
defective product and receive a proportional price reduction.
European Union notice:
Please note that, in the European Union, any warranty period less than two years shall
be increased to two years.
For Australia/New Zealand Consumers Only:
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. This warranty is provided
by Ausounds Intelligence, LLC 15300 Ventura Blvd Suite 214 Sherman Oaks, CA
91403. Contact information for Australia/New Zealand Consumers Only: Telephone:
1 818-873-0113. For any product/warranty -related questions, please contact
customer support at [email protected]
For Japan Consumers Only:
The Federal Arbitration Act (the “FAA”) applies to the agreement to arbitrate to the
maximum extent allowable. Except as preempted by FAA, the laws of the State of
California, without reference to its choice of laws principles, will govern this Limited
Warranty. With the exception of disputes in small claims court or in arbitration, You
and Ausounds consent to jurisdiction and venue in the state or federal courts located
in Los Angeles County, California, for any claims arising out of a dispute relating to
this Limited Warranty. Notwithstanding the Section titled “Binding Arbitration and
Class Action Waiver”, if You are a consumer in Japan, You have the right to resolve
disputes before the Tokyo District Court in Japan. Nothing in this Limited Warranty
affects Your rights as a consumer in Japan to rely on mandatory provisions of
Japanese law. Contact information for Japanese Consumers Only: Telephone:
03-3477-0122. For any product/warranty -related questions, please contact
customer support at [email protected]
Insertion de l’appareilCâble audio
3,5mm à 3,5mm
Merci d’avoir acheté les écouteurs supra-auriculaires planaires
magnétiques sans fil AU-X ANC. Veuillez lire attentivement le manuel
de l’utilisateur avant d’utiliser ce produit et le conserver pour férence
ultérieure.
La technologie AU-X ANC est coue pour les performances et est
équie de notre driver magtique planaire AU pour offrir un son
haute résolution incroyable dans les connexions sans fil Bluetooth® et
filaire. Profitez de votre musique dans n’importe quel environnement
grâce à la Soundproof Active Noise Cancellation.
CONTENU
Veuillez vérifier si les pièces suivantes de la boîte sont complètes.
Casque Btier de transport Prise 6,3mm à 3,5mm
Câble de charge
de l’interface Type C
DESCRIPTION DU PRODUIT
Chargez les écouteurs pendant 1 heure avant de les utiliser pour la
premre fois. Connectez le système AU-X ANC au chargeur USB-C.
Lindicateur LED affichera une lumre rouge pour indiquer que le casque
est en charge. Une charge complète prend environ 2heures lorsque la
batterie est comptement épuisée. Une fois l’indicateur LED éteint, le
casque est comptement chargé. Ce produit prend en charge la charge
rapide et peut être utilisé pendant 2 à 3 heures après 15 minutes de
charge.
STOCKAGE DE VOTRE AU-X ANC
Rangez vos écouteurs en toute sécurité avec le boîtier de transport
inclus, comme illustré dans le scma ci-dessous.
APPARIEMENT
Marche/Arrêt
Mise sous tension
Mise hors tension
Bouton d’alimentation
Appuyez longuement
pendant 2secondes
Appuyez longuement
pendant 3secondes
Indicateur LED
La lumière bleue
clignote 2fois
La lumière bleue s’allumé
pendant 2secondes
STOCKAGE EN VOL
Votre mallette de transport est
coue avec une poche pour câble
pour les accessoires fournis.
APPARIEMENT BLUETOOTH
Appuyez sur le bouton d’alimentation de votre casque et maintenez-le
enfoncé pour lancer le mode de recherche d’appariement Bluetooth.
Sur l’appareil que vous souhaitez coupler, lectionnez Paratres
Bluetooth et activez Bluetooth. Dans la liste des dispositifs
disponibles, recherchez et sélectionnez «AU-X ANC» pour commenc-
er l’appariement. (Les appareils Android varient selon le sysme).
WARRANTY CARD
CONNEXION AUTOMATIQUE
Le sysme AU-X ANC stocke votre dernier appareil connec en
moire. Si votre casque est connec, car hors de portée, ils se
reconnectent automatiquement une fois dans la plage. Pour coupler
votre casque à un nouvel appareil, appuyez sur le bouton d’alimentation
et maintenez-le enfonpendant 7secondes jusqu’à ce que le casque
passe en mode de recherche d’appariement. S’il est déconnecté
pendant plus de 30minutes, sélectionnez le nom du Bluetooth sur votre
appareil pour vous reconnecter. Sil est déconnecpendant plus de 2
heures, il s’arrête automatiquement.
APPARIEMENT NFC RAPIDE
Le système AU-X ANC est équipé d’un appariement NFC rapide. Pour
utiliser cette option, activez la fonction NFC de votre appareil. Ensuite, il
suffit de toucher le dispositif sur la marque NFC sur le casque comme
indiqci-dessous. Tenez le casque contre le dispositif jusqu’à ce qu’il
soit couplé. Veuillez consulter le manuel d’utilisation de votre appareil
pour connaître l’emplacement de contact NFC désigné.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128

AUSounds AU-X ユーザーマニュアル

カテゴリー
モバイルヘッドセット
タイプ
ユーザーマニュアル