AUSounds AU-X ユーザーマニュアル

X ANC

USER MANUAL

Manuel d'utilisation | Manual

Manuale d'uso | Benutzer-Handbücher

Manual de Usuario | 사용 매뉴얼

|

Ausounds Intelligence, LLC.

15300 Ventura Blvd., Suite 214

Sherman Oaks, California 91403, USA

www.ausounds.com

Designed by Ausounds in California | Made in China

ConçuparAusoinds,Californie,fabriquéenChine

ProjetadopelaAusoundsnaCalifórnia|FabricadonaChina

ProgettatodaAusoundsinCalifornia,prodottoinCina

EntworfenvonAusoundsofCalifornia,hergestelltinChina

DiseñadaporAusoundsenCalifornia|HechaenChina

California의Ausounds회사가디자인,중국제조

CaliforniaAusounds

Ausounds

Aircraft Insertion 3.5mm to 3.5mm

Audio Cable

Thank you for purchasing the AU-X ANC Planar Magnetic Wireless

Over-Ear headphones. Please read the user manual carefully before

using this product, and keep it for future reference.

The AU-X ANC is engineered for performance and is equipped with our

AU planar magnetic driver to deliver incredible Hi-Res audio in both

wireless Bluetooth® and wired connections. Enjoy your music in any

environment with Soundproof Active Noise Cancellation.

CONTENTS

Please check if the following parts in the package are complete.

Headphone Carrying Case 6.3mm to 3.5mm Plug

Type-C Interface

Charging Cable

PRODUCT DESCRIPTION

Charge the headphones for 1 hour before using them for the first time.

Connect the AU-X ANC to the USB-C charger. The LED indicator will

show a red light to indicate that the headphone is charging. A full charge

takes about 2 hours when the battery is fully depleted. Once the LED

indicator turns off, the headset is fully charged. This product supports

rapid charging and can be used for 2 to 3 hours after 15 minutes of

charging.

STORING YOUR AU-X ANC

Safely store your headphones with the included carrying case as shown

in the figure below.

PAIRING

On/Off

Power On

Power Off

Power Button

Long press for 2 sec

Long press for 3 sec

LED Indicator

Blue light flashes 2 times

Blue light is on for 2 sec

IN-FLIGHT STORAGE

Your carrying case is designed

with a cable pocket for the

provided accessories.

BLUETOOTH PAIRING

Press and hold the power button on your headphone to initiate

Bluetooth pairing search mode. On the device you wish to pair with,

select Bluetooth settings and enable Bluetooth. In the list of available

devices, find and select “AU-X ANC” to initiate pairing. (Android

devices vary by system).

WARRANTY CARD

AUTOMATIC CONNECTION

The AU-X ANC stores your last connected device in memory. If your

headphones are disconnected due to being out of range, they will

automatically reconnect once in range. To pair your headphone to a new

device press and hold the power button for 7 sec until the headphone

enters the search pairing mode. If it is disconnected for more than 30

minutes, select the Bluetooth name in your device to connect again. If it

is disconnected for more than 2 hours, it will automatically shut down.

NFC FAST PAIRING

The AU-X ANC is equipped with NFC fast pairing. To use this option, turn

on the NFC function of your device. Then simply touch the device to the

NFC mark on the headphone as seen below. Hold the headphone against

the device until they are paired. Please refer to your devices instruction

manual for the designated NFC touch location.

ANC ACTIVE NOISE CANCELLATION

The active noise cancellation function is turned on by default. Toggle

through the various modes by short pressing the ANC button twice.

The voice will prompt: “ANC ON”, “Monitor mode”, “ANC OFF”.

QUICKLY SWITCH THE MONITOR MODE

Cover the touch panel on the right ear cup with your hand, to switch to

ambient sound mode, remove your hand to return to the previous

mode.

VOICE ASSISTANTS

To initiate the voice assistant feature touch the center of right ear cup

3 times. Your connected device’s voice function will initiate allowing

you to issue vocal commands through your headphone.

AUTO-WEAR DETECTION

The music will automatically pause after removing the headphones,

and the touch pad is no longer effective. The music will play automati-

cally upon wear detection.

SWAPPING CALLS TO DEVICE

When calling or receiving calls, press and hold the top of the touch

pad for 2 sec to switch from the headphones to your device to answer.

CONTROLS ( Right Side )

Play/Pause

Increase volume

Decrease volume

Next track

Previous track

Tap the ear cup twice to play or pause your music

Touch and slide the ear cup up to increase the volume.

Sliding to the edge and holding will continue to

increase the volume.

Touch and slide the ear cup down to reduce the

volume. Sliding to the edge and holding will continue to

decrease the volume.

Touch and slide towards the back of your head to play

the previous track.

Touch and slide forward to play the next track

Answer call

End call

Decline call

Voice assistant

Switching calls

Pairing mode

Double tap the ear cup

Press and hold the ear cup for 1 sec

Touch the center of the ear cup 3 times

Touch and hold the center of the right ear cup

Press and hold the power button for 7 sec

AUXILIARY

To connect your headphones using the auxillary port. Insert the

provided 3.5mm plug to your auxillary source device. The auxillary

connection overrules any Bluetooth connections and will interrupt

audio. Bluetooth will automatically be renabled once the auxillary

3.5mm plug is disconnected.

NOTE: Since auxillary audio does not require power, you can listen to

your headphone with the power off using the auxillary connection.

NOTICE: In order to listen to music with Hi-res audio performance,

please make sure to use the provided cable instead of wireless

connection.

SPECIFICATIONS

Bluetooth Version

Bluetooth Protocol

Bluetooth Range

ANC Depth

Auto-wear Detection

Driver Type

Driver Size

Impedance

Frequency Range

SPL

Battery Life

Battery Capacity

Charging Time

Weight

Waterproof level

BT 5.0

SBC, AAC, aptX, aptX HD

10m | 32 ft

28db

Yes

Planar Magnetic Driver

61*51mm

32 ohms

20Hz-40kHz

102 +/-3db

25 Hours

1050mAh

2 Hours

357g

IPX5

SAFETY INSTRUCTIONS

• Do not attempt to make any modifications to the product, including removing or

modifying the product, as the damage is not covered by the warranty.

• Do not place the product in extremely high or low ambient temperatures for

extended periods of time. Extreme temperatures can cause equipment to

deform, and reduce the charging capacity of the device.

• Thunderstorm weather may affect the normal use of the product and there is a

risk of electric shock, so please do not use the earphones outside during

thunderstorms.

• This product contains small parts. Do not swallow it to avoid danger. Keep the

product out of the reach of children.

• Using the product for a long time at high volume may affect your hearing,

please control the volume.

• If this product supports active noise cancellation. Please do not turn this

function on when walking, driving, or cycling to avoid accidents.

BATTERY WARNING

This product contains lithium battery, please do not disassemble, impact, squeeze

or put into fire. Please do not place the product under high temperature or hot sun,

beware of explosion. If there is swelling, leakage, odor or any other abnormality in

the battery compartment of the product, do not continue to use it. Please dispose

of used batteries properly in accordance with local regulations.

WARNING

Do not subject the product to excessive shock. If your product has touch sensor,

do not apply stickers or other adhesive items to the touch sensor control panel. Be

careful not to catch your finger in the unit when folding. The Bluetooth function

may not work with a mobile phone, depending on the signal conditions and the

surrounding environment. Do not apply weight or pressure to the product for long

periods, including when it is stored, as it may cause deformation. If you experience

discomfort while using the product, stop using it immediately. If this product has

earpads/ ear tips they may be damaged or deteriorate with long-term use and

storage.

CLEANING THE UNIT

When the outside of the product is dirty, clean it by wiping with a soft dry cloth. If the

product is particularly dirty, soak a cloth in a dilute solution of neutral detergent, and

wring it well before wiping. Do not use solvents such as thinner, benzene, or alcohol,

as they may damage the surface.

DO NOT USE THE HEADSET NEAR MEDICAL DEVICES

This product has magnets which may interfere with pacemakers, defibrillators and

programmable shunt valves or other medical devices. Do not put this product close to

these medical devices and the person who use any of these medical devices. Consult

your doctor before using this product, if you have any concerns.

DO NOT PLACE CARDS WITH MAGNETS

IN THE VICINITY OF THE HEADSET

This product has magnets. Placing cards with magnets in the vicinity of the product

may affect the magnetism of the card and render it unusable.

READ ALL INSTRUCTIONS BEFORE USE AND

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

FCC RF EXPOSURE STATEMENT:

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter. This device complies with FCC radiation exposure limits

set forth for an uncontrolled environment.

CAUTION!

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

ISEDC STATEMENT

This device complies with Innovation, Science, and Economic Development

Canada license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’ Innovation, Sciences et

Développement économique Canada applicables aux appareils radio exempts de

licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil

nedoit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de classe b est conforme à la norme nmb - 003 du canada.

ISEDC RF EXPOSURE STATEMENT

The device is compliance with RF exposure guidelines, users can obtain Canadian

information on RF exposure and compliance.

LE PRÉSENT APPAREIL EST CONFORME

Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,

les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and

compliance d’acquérir. les informations correspondantes.

PRODUCT WARRANTY

Ausounds Intelligence warrants this product to the original purchaser to be free from

defects in material and workmanship, under normal conditions for a period of 1-year

for parts and labor only from the date of original purchase. Ausounds agrees at our

option during the warranty period, to repair any defect in material or workmanship or

to furnish an equal product in exchange without repair charges, during the first 365

days. After 365 days, a flat labor rate may be required and payment sent along with

the product. Except where prohibited by applicable law, this warranty is

nontransferable and is limited to the original purchaser and the country in which the

product was purchased. This warranty gives you specific legal rights, and you may

also have other rights, including a longer warranty duration that may vary under local

laws. If you do not find a solution on our website, please contact the retailer from

whom you made your purchase. Valid warranty claims are generally processed

through the point-of-purchase retailer during the first thirty (30) days after purchase.

This period of time may vary depending on the retailer. If your warranty claim cannot

be processed through the point-of-purchase retailer, please contact our support

department at support@ausounds.com or call direct at 1-818-873-0113.

Please follow these directions to return your product:

1. Contact Ausounds support at support@ausounds.com or 818-873-0113 to

receive a return authorization

2. Pack the unit in a well-padded sturdy carton if you do not have the original

packaging

3. Enclose a copy of your sales receipt to validate the date of purchase

4. Ausounds will elect to repair or replace the product free of repair charges during

the first 365 days. After 365 days, payment for labor may need to be sent with the

product. Call customer support at 818-873-0113 or email

[email protected]

Ausounds Intelligence

Attention: Warranty Services

3190 Chicago Ave Riverside, CA 92507-3448 US

NOTE: This warranty does not cover any product which has been subject to damage

due to misuse, neglect, accidental damage, abuse, commercial use, or any product

modifications. This warranty does not cover damage due to improper operation or

maintenance, connection to an improper voltage supply, or attempted repair by

anyone other than Ausounds. This warranty does not cover products sold AS IS or

refurbished units. For consumers, who are covered by consumer protection laws or

regulations in their country of purchase or, if different, their country of residence,

the benefits conferred by Ausounds’ Limited Warranty are in addition to all rights

and remedies driven by such consumer protection laws and regulations , including

but not limited to these additional rights.

National Statutory Rights

Consumers have legal rights under applicable national legislation governing the

sale of consumer goods. Such rights are not affected by the warranties in this

Limited Warranty. In Brazil, remedies include the consumer’s option to keep the

defective product and receive a proportional price reduction.

European Union notice:

Please note that, in the European Union, any warranty period less than two years shall

be increased to two years.

For Australia/New Zealand Consumers Only:

Our goods come with guarantees that cannot be excluded under the Australian

Consumer Law. You are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage. You are also

entitled to have the goods repaired or replaced if the goods fail to be of acceptable

quality and the failure does not amount to a major failure. This warranty is provided

by Ausounds Intelligence, LLC 15300 Ventura Blvd Suite 214 Sherman Oaks, CA

91403. Contact information for Australia/New Zealand Consumers Only: Telephone:

1 818-873-0113. For any product/warranty -related questions, please contact

customer support at [email protected]

For Japan Consumers Only:

The Federal Arbitration Act (the “FAA”) applies to the agreement to arbitrate to the

maximum extent allowable. Except as preempted by FAA, the laws of the State of

California, without reference to its choice of laws principles, will govern this Limited

Warranty. With the exception of disputes in small claims court or in arbitration, You

and Ausounds consent to jurisdiction and venue in the state or federal courts located

in Los Angeles County, California, for any claims arising out of a dispute relating to

this Limited Warranty. Notwithstanding the Section titled “Binding Arbitration and

Class Action Waiver”, if You are a consumer in Japan, You have the right to resolve

disputes before the Tokyo District Court in Japan. Nothing in this Limited Warranty

affects Your rights as a consumer in Japan to rely on mandatory provisions of

Japanese law. Contact information for Japanese Consumers Only: Telephone:

03-3477-0122. For any product/warranty -related questions, please contact

customer support at [email protected]

Insertion de l’appareilCâble audio

3,5mm à 3,5mm

Merci d’avoir acheté les écouteurs supra-auriculaires planaires

magnétiques sans fil AU-X ANC. Veuillez lire attentivement le manuel

de l’utilisateur avant d’utiliser ce produit et le conserver pour référence

ultérieure.

La technologie AU-X ANC est conçue pour les performances et est

équipée de notre driver magnétique planaire AU pour offrir un son

haute résolution incroyable dans les connexions sans fil Bluetooth® et

filaire. Profitez de votre musique dans n’importe quel environnement

grâce à la Soundproof Active Noise Cancellation.

CONTENU

Veuillez vérifier si les pièces suivantes de la boîte sont complètes.

Casque Boîtier de transport Prise 6,3mm à 3,5mm

Câble de charge

de l’interface Type C

DESCRIPTION DU PRODUIT

Chargez les écouteurs pendant 1 heure avant de les utiliser pour la

première fois. Connectez le système AU-X ANC au chargeur USB-C.

L’indicateur LED affichera une lumière rouge pour indiquer que le casque

est en charge. Une charge complète prend environ 2heures lorsque la

batterie est complètement épuisée. Une fois l’indicateur LED éteint, le

casque est complètement chargé. Ce produit prend en charge la charge

rapide et peut être utilisé pendant 2 à 3 heures après 15 minutes de

charge.

STOCKAGE DE VOTRE AU-X ANC

Rangez vos écouteurs en toute sécurité avec le boîtier de transport

inclus, comme illustré dans le schéma ci-dessous.

APPARIEMENT

Marche/Arrêt

Mise sous tension

Mise hors tension

Bouton d’alimentation

Appuyez longuement

pendant 2secondes

Appuyez longuement

pendant 3secondes

Indicateur LED

La lumière bleue

clignote 2fois

La lumière bleue s’allumé

pendant 2secondes

STOCKAGE EN VOL

Votre mallette de transport est

conçue avec une poche pour câble

pour les accessoires fournis.

APPARIEMENT BLUETOOTH

Appuyez sur le bouton d’alimentation de votre casque et maintenez-le

enfoncé pour lancer le mode de recherche d’appariement Bluetooth.

Sur l’appareil que vous souhaitez coupler, sélectionnez Paramètres

Bluetooth et activez Bluetooth. Dans la liste des dispositifs

disponibles, recherchez et sélectionnez «AU-X ANC» pour commenc-

er l’appariement. (Les appareils Android varient selon le système).

WARRANTY CARD

CONNEXION AUTOMATIQUE

Le système AU-X ANC stocke votre dernier appareil connecté en

mémoire. Si votre casque est déconnecté, car hors de portée, ils se

reconnectent automatiquement une fois dans la plage. Pour coupler

votre casque à un nouvel appareil, appuyez sur le bouton d’alimentation

et maintenez-le enfoncé pendant 7secondes jusqu’à ce que le casque

passe en mode de recherche d’appariement. S’il est déconnecté

pendant plus de 30minutes, sélectionnez le nom du Bluetooth sur votre

appareil pour vous reconnecter. S’il est déconnecté pendant plus de 2

heures, il s’arrête automatiquement.

APPARIEMENT NFC RAPIDE

Le système AU-X ANC est équipé d’un appariement NFC rapide. Pour

utiliser cette option, activez la fonction NFC de votre appareil. Ensuite, il

suffit de toucher le dispositif sur la marque NFC sur le casque comme

indiqué ci-dessous. Tenez le casque contre le dispositif jusqu’à ce qu’il

soit couplé. Veuillez consulter le manuel d’utilisation de votre appareil

pour connaître l’emplacement de contact NFC désigné.

ページが読み込まれています...

AUSounds AU-X ユーザーマニュアル

AUSounds AU-X ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント